Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 63 for “"Crack depth"”.
-
Crack depth measurement in reinforced concrete using ultrasonic techniques
… and cost. Of particular interest are macro cracks that extend through the concrete cover of the reinforcement, which can potentially expose the reinforcement to corrosive elements. The high density of scatterers such as aggregate and voids in concrete makes quantitative imaging with coherent …
-
Finite element simulation of crack depth measurements in concrete using diffuse ultrasound
Surface-breaking cracks pose a serious threat to the service life of concrete structures and health monitoring is presently conducted by a visual inspection method, yielding a potential risk to safety. Diffuse ultrasonic techniques have shown their potential as an ultrasonic technique for measuring …
-
Evaluation of crack depth in concrete using non-contact surface wave transmission measurement
… to identify and characterize surface-breaking cracks in concrete structures using surface wave transmission measurements. It has been found that the surface wave transmission (SWT) across a surface-breaking crack is related to the crack depth. However, inconsistence was noticed in surface wave …
-
Desiccation cracking of soils
The depth of cracking of soils is often required for boundary value and limit equilibrium analyses in geotechnical engineering. At present, the depth of cracking is customarily expressed as a function of shear strength using the Rankine theory of lateral earth pressure. The objectives of this …
-
Fatigue crack growth in hydrogen pipeline steels
… mechanism is hydrogen accelerated fatigue crack growth since it is well known that hydrogen can enhance fatigue crack growth rates by a factor of 10. In this thesis, the fatigue life of a line pipe manufactured with API steel is calculated by investigating the growth of a semi-elliptical …
-
An alternating current potential difference calibration study and fatigue crack growth in steel
… for the 'growth' of reference flaws and fatigue cracks upto depths of 24.58 mm in EN3B steel. The response between alternating current potential difference and flaw/crack depth was found to satisfy a degree 2 polynomial relationship which could be approximated to degree 1 over small changes in …
-
Cost-Effective Strengthening and Automated Inspection of One-Way Precast Reinforced Concrete Flat Slab Bridges in South Carolina
… learning models for an automated inspection for crack detection, estimation of crack spacing, and crack depth estimation. Two research studies were performed to accomplish the aforementioned goals. The innovation of the first study lies in exploring methods for strengthening one-way RC precast …
-
Structural health monitoring using lamb waves actuated by surface-mounted piezoelectric materials
… catch was used in order to study the effect of crack depth on the propagation of lamb waves. For this reason, experiments on aluminum plates with defects of variable depths were conducted and results show significant variations of the energy of the wave as function of the crack depth. Finally, …
-
Fatigue life extension of welded steel structures by peening and TIG remelting
… is in service, the structure might be already cracked. Different techniques were developed to extend the fatigue life of the structure and retrofit any existing crack, Peening and TIG remelting are just examples. A literature study is conducted to establish better understand on the effect of …
-
Crack size evaluation using ultrasonic surface wave spectroscopy
… use in measuring the dimensions of simulated cracks (with dimensions of the order of a millimetre) are described. The method, the generation of the cepstra of signals reflected from the defect, removes the problem of variation in the coupling of the transducer to the testpiece. It also …
-
Image-Based Crack Detection by Extracting Depth of the Crack Using Machine Learning
… and the safety of the public. Detecting cracks in their early stage allows repairs to be made without the need to replace the whole structure, so it reduces the cost. Traditional methods are slowly falling behind as technology advances and an increase in demand for a practical method of …
-
DETECTING THE DEPTH OF THE CRACK BY LASER SPOT THERMOGRAPHY
Understanding the properties of the cracks can give detailed insight about the health and status of any structure. Some cracks may not be detrimental, others may cause the structure to collapse if not inspected, recognized and repaired ahead of time. This article is about detecting the depth of a …
-
Effect of pre-exposure thermal treatment on susceptibility of type 304 austenitic stainless steel to stress corrosion
… type 304 stainless steel to stress corrosion cracking was studied in terms of time for crack nucleation and rate of crack propagation. U-bend specimens were exposed to 42 weight percent magnesium chloride aqueous solution after pre-exposure heat treatments at 140°C and 154°C. The straight-line …
-
Ultrasonic spectroscopic studies of the interactions of Rayleigh waves with surface-breaking defects
<p>Ultrasonic Rayleigh waves provide a depth-dependent probe to investigate surface breaking defects. This dissertation explores the use of broadband surface waves to examine crack-like defects which open to the surface of a material. An ultrasonic spectroscopic system has been developed to analyze …
-
Prediction of shear strength and vertical movement due to moisture diffusion through expansive soils
… coefficients has been presented for different crack depth patterns.
-
Crack nucleation and growth in stress-corrosion of AISI 304 stainless steel after annealing in hydrogen and nitrogen
… effect of nitrogen and hydrogen annealing on the crack nucleation and growth of type AISI 304 stainless steel in boiling 421 magnesium chloride has been investigated. The susceptibility to stress-corrosion was measured in terms of time to crack nucleation and rate of crack propagation . A …
-
Assessment of Tensile Strain Capacity in X70 and X100 Pipeline Steels
… with internal or external semi-elliptical cracks and extends to X70 and X100 girth weld pipes under tension and bending conditions. FEA incorporates initiation and ductile tearing criteria for various crack depths, internal pressures, Heat Affected Zone (HAZ) softening levels, and overmatch …
-
Specimen size effects in slow strain-rate testing
… specimen, and a is the environmentally induced crack depth. This effective length to diameter ratio correlates with the applied tearing modulus for a cracked round bar tension specimen as defined by P. C. Paris and co-workers in 1979. The results verify that the tearing modulus may be used as a …
-
Evaluation of susceptibility of AISI 304 to stress-corrosion cracking in terms of crack nucleation and crack propagation
… susceptibility of AISI 304 to stress-corrosion cracking in terms of time to crack nucleation and rate of crack propagation. U-bend specimens were exposed to magnesium chloride solutions boiling at atmospheric pressure for some predetermined time. The concentrations of magnesium chloride employed …
-
FRACTOGRAPHY OF AS-CAST DUCTILE IRON SAMPLES AND ANALYZING THE EFFECT OF SKIN ROUGHNESS ON ITS FATIGUE PROPERTIES USING FRACTURE MECHANICS APPROACH
… information regarding mode of failure, crack initiation sites and crack propagation path. Quantification of surface profile was done by performing surface profilometer tests. Profilometer tests gave a detailed picture and accurate areal parameters for surface flaws present on all the …
Page 1 of 4