Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 726 for “"Crack initiation"”.
-
Tensile crack initiation in [gamma]-TiAl
Thesis (Ph. D.)--Michigan State University. Department of Chemical Engineering and Materials Science, 2003
-
Fatigue Crack Initiation from Stress Concentrations in Cast Steels
… number of cycles to produce a detectable fatigue crack correlated well with both the range of stress intensity factor divided by the square root of the notch root radius and with the product of the stress concentration factor and the net section stress. The results obtained were compared with the …
-
Fatigue crack initiation in cross-ply carbon fiber laminates
… Specifically, the stress levels at which cracks initiated in static and fatigue loading in the 90 degree plies of a "quasi-cross ply layup" [0/905]S was investigated. For layups which contain them, cracks in composite laminates initiate and propagate from 90 degree plies (including the …
-
Fatigue crack initiation and propagation from defects in aluminium welds
Fatigue crack initiation and propagation in aluminium butt welds has been investigated. It is shown that the initiation of cracks from both buried defects and. from the weld reinforcement may be quantified by predictive laws based on either linear elastic fracture mechanics, or on Neuber's rule of …
-
Fatigue crack initiation and propagation in plain carbon-manganese steels.
Abstract not provided.
-
Shear crack initiation and propagation in foam core sandwich structures
… analyses. Experiments were performed on sharp-cracked specimens using the compact-tension-shear (CTS) test loading device. Foams of three different densities were tested. The CTS specimen was, in association with a special loading device, an appropriate apparatus for experimental mixed-mode …
-
Crack Initiation Modeling of a Directionally-Solidified Ni-base Superalloy
… subject to periodic replacement as a result of cracking, damage, and mechanical property degeneration that render them unsafe for continued operation. In view of the significant costs associated with inspecting, servicing, and replacing damaged components, there has been much interest in …
-
Creep-fatigue Crack Initiation And Propagation Of A Notched Stainless Steel
… analyses to include fatigue- and creep-crack growth analyses. Founded on existing approaches to creep-fatigue crack growth analyses, including experimental elastic and plastic fracture mechanics approaches, a coupled creep-fatigue crack initiation and propagation model is developed. To …
-
Studies of the crack initiation and notch sensitivity behaviour of gilsocarbon
<p>To better understand the initiation of axial cracks in the graphite moderator bricks of advanced gas-cooled nuclear reactors, the development of a test suitable for measuring notch sensitivity from small specimens would be valuable. The test geometry is constrained, currently, to be under 20 mm …
-
Crack initiation under shock loading : validation of a new testing technique
… is subject of some controversy, because the crack initiation conditions cannot be established with accuracy. Besides, some of them are limited to low loading velocities and the evaluations are made following a static approach. In consequence, a fundamental study is required with two aims, …
-
Transverse Crack Initiation and Propagation in Unidirectional Composites with Manufacturing Defects
… objective of the current work is to study damage initiation and propagation in unidirectional fiber-reinforced polymeric composites under transverse loading. In the study conducted, a systematic analysis is carried out to analyze the effects of manufacturing induced defects such as random …
-
A Model for Joining the Fatigue Crack Initiation and Propagation Analyses
… analytical model for nonarbitrarily defining the crack initiation length (a(,I)) of a notched member on basis of the minimum total life estimate (Life-calculation method) is proposed. The crack initiation length (a(,I)) is not a fixed value, as usually assumed, but varies with stress level (or …
-
Fatigue Crack Initiation as a Function of Temperature and Strain Rate
Made available in DSpace on 2014-12-12T00:25:56Z (GMT). No. of bitstreams: 1 7500438.pdf: 1914377 bytes, checksum: fd307c05d347ae8a2d053c0f9dc15893 (MD5) Previous issue date: 1974
-
Crack Initiation Analysis in Residual Stress Zones with Finite Element Methods
This research explores the nearly untapped research area of the analysis of fracture mechanics in residual stress zones. This type of research has become more prevalent in the field in recent years due to the increase in prominence of residual stress producing processes. Such processes include …
-
An experimental study of crack initiation and growth from coldworked holes
Thesis (Ph. D.)--Michigan State University. Department of Metallurgy, Mechanics and Materials Science,
-
Creep crack initiation and growth in 2.25% chromium - 1% molybdenum alloy steel
… response ahead of a defect during the crack initiation, or incubation, period.</p> <p>The investigation was conducted by carrying out creep tests on compact tension specimens in three microstructural variations of the alloy and, subsequently, using optical, scanning and transmission …
Page 1 of 37