Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 125 for “"Crack path"”.
-
Crack Path Selection in Adhesively Bonded Joints
… is to obtain an overall understanding of the crack path selection in adhesively bonded joints. Using Dow Chemical epoxy resin DER 331® with various levels of rubber concentration as an adhesive, and aluminum 6061-T6 alloy with different surface pretreatments as the adherends, both symmetric …
-
Crack path selection in microstructurally tailored inhomogeneous polymers
… that can help us experimentally study crack path selection problems. The model material which we are using is a polyethylene co-polymer, ECO, whose photosensitive behavior allows alterations in its mechanical properties when subjected to ultraviolet (UV) irradiation. It is seen that ECO …
-
Crack path determination for non-proportional mixed-mode fatigue
The objective of this work is to study crack path deflection under proportional and non-proportional mixed-mode fatigue and predict crack branching direction based on linear elastic fracture mechanics (LEFM) driving forces. Under proportional in-phase mixed Mode I / Mode II loading conditions, …
-
Crack Path Predictions Under Mixed Mode Loading In Aero-Structures: Measurements and Analysis
… conditions, the flaw is likely to undergo stable crack growth (SCG) in ductile materials. Understanding such fracture events in ductile materials is an important component of structural integrity analysis for ductile structures, especially since there are no general fracture criterion available to …
-
Fracture toughness, crack path and strength mismatch of Alloy 52 dissimilar metal weld
… The objective is to investigate the effect of crack path and strength mismatch on fracture toughness of an Alloy 52 DMW. The thesis is based on three articles published in established journals in the field of fracture mechanics. The author of the thesis is the main contributor for these …
-
Crack Path Bifurcation at a Tear Strap in a Pressurized Stiffened Cylindrical Shell
… The shell contained an initial, axial through-crack centered between the straps. The crack propagated slowly in the axial direction as the pressure increased above a certain value until a maximum pressure was attained, and then the crack propagated dynamically. The tear straps sufficiently …
-
Investigation of Liquid-Metal-Embrittlement Crack-path: Role of Grain Boundaries and Responsible Mechanism
… of micro-events of LME calls for in-depth crack-path analysis from macroscopic, microscopic, and atomic viewpoints. The aim of this research is to explore the role of grain boundary type, and characteristics such as grain boundary misorientation angle, crystallographic plane, and grain …
-
Crack path selection and shear toughening effects due to mixed mode loading and varied surface properties in beam-like adhesively bonded joints
… environmental challenges. In these situations, cracks can start within the adhesive layer or debonds can initiate near an interface. The paths taken by propagating cracks can affect the resistance to failure and the subsequent service lives of the bonded structures. The behavior of propagating …
-
Mineral-scale Controls on the Micromechanics of High Strain Rate Failure in Heterogeneous Materials
… like grain boundaries and pre-existing micro-cracks, which are prevalent in anisotropic and heterogeneous materials but poorly represented in models built on observations of homogenous metals and ceramics. To evaluate the influence of heterogeneity on high strain rate fracture behavior, we …
-
Applications of advanced imaging and simulation methods in analysing delamination fracture in fibre reinforced composite materials.
… between interlaminar and intralaminar crack paths. In turn, the resultant damage tolerance and resistance after impact can be attributed to the ability of the composite to suppress the initiation and propagation of delamination damage under the impact site. Keeping a crack in the …
-
Experimental investigation of crack paths.
The knowledge of crack path mechanism could improve the safety issues, design and finally reduce the cost of the maintenance or production of structures in aerospace and energy industries. However, the physical mechanism behind the crack path development is not still completely understood although …
-
Laboratory evaluation of cracking in asphalt concrete
Cracking is one of the major distresses in asphalt concrete leading to high maintenance and rehabilitation costs throughout the nations pavement infrastructure. Asphalt concrete is a three phase, heterogeneous composite consisting of aggregate, mastic, and air voids. Crack initiation, crack path …
-
Micro-mechanical contributions to interlaminar toughness in particle-toughened CFRPs
… Computed Laminography (SRCL) allowed the crack tip micro-mechanisms to be observed in situ under Mode I and Mode II quasi-static loading conditions. Fracture toughness tests were undertaken to establish the ranking of the ten different material systems, which were compared in terms of the …
-
STUDYING THE EFFECTS OF INITIAL CRACK ANGLE ON THE CRACK PROPAGATION IN GRAPHENE NANO-RIBBON THROUGH MOLECULAR DYNAMICS SIMULATIONS
… graphene nano-ribbon to explore the behavior of crack propagation at different crack angles. We have performed classical Molecular Dynamics simulations using LAMMPS at ten different crack angles between 0 degrees and 45 degrees, in an increment of 5 degrees to observe the parameters that dominate …
-
Modeling competing fracture for dry transfer of thin films to a flexible substrate
… equations are developed to quantify load, crack length, end rotation, damage zone length and mode-mix as a function of material and interface properties. Competing fracture during the transfer of a 2D material like graphene is simulated with finite element models in ABAQUS®. Two damage …
-
Numerical study of solder joint failure under fast loading conditions
… evolution leading to eventual failure through crack formation. Attention is devoted to deformation under relative high strain rates (1-100 s-1), mimicking those frequently encountered in drop and impact loading of the solder points. The effects of applied strain rate and loading mode on the …
-
Kinetic and fractographic study of the stress corrosion cracking of Austenitic stainless steels
… to study the propagation of stress corrosion cracks as a function of stress intensity in 316 and 310 stainless steels, and a TRIP steel exposed to hot aqueous magnesium chloride solutions. The effects of cold work, temperature and applied potential on both the fractography and cracking rates …
-
Towards Simulations of Pervasive Fracture Across Structural Scales
… computational solid mechanics. Propagating cracks exhibit a rich behavior governed by the delicate interplay between macroscopic elasticity and microscopic failure mechanisms in the neighborhood of the crack tip. This dissertation takes a closer look at enabling the computational modeling of …
-
Fatigue crack growth of ultra fine grained aluminium
The fatigue crack growth behaviour of ultrafine grained (UFG) 6061 aluminium alloy processed by equal channel angular pressing (ECAP) is studied and discussed in relation to the crack path and grain microstructure. The UFG samples exhibited a lower fatigue threshold, a unique transitional regime …
Page 1 of 7