Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Crash Test Dummy"”.

  1. Development, Calibration, and Validation of a Finite Element Model of the THOR Crash Test Dummy for Aerospace and Spaceflight Crash Safety Analysis

    Anthropometric test devices (ATDs), commonly referred to as crash test dummies, are tools used to conduct aerospace and spaceflight safety evaluations. Finite element (FE) analysis provides an effective complement to these evaluations. In this work a FE model of the Test Device for Human Occupant …

    vt Repository record for Development, Calibration, and Validation of a Finite Element Model of the THOR Crash Test Dummy for Aerospace and Spaceflight Crash Safety Analysis (opens in a new tab)

  2. Analysis of the Range of Motion of the Shoulder During Static Loading

    When developing new and safer vehicles, crash test dummies are important tools. The crash test dummy used in offset frontal collision tests today (Hybrid III), in e.g. EuroNCAP consumer testing is, to our knowledge, poorly validated for that type of testing. Volvo Car Corporation, Autoliv Research …

    chalmers Repository record for Analysis of the Range of Motion of the Shoulder During Static Loading (opens in a new tab)

  3. Development of a finite element dummy model for improved lying-occupant safety evaluation

    The aim of this study was to develop an FE crash test dummy model to be used for safety evaluation of lying truck-occupants. The model was to be included in an available model of a truck sleeper section for simulations of a truck frontal impact using the Radioss finite element solver. The work …

    chalmers Repository record for Development of a finite element dummy model for improved lying-occupant safety evaluation (opens in a new tab)

  4. Finite Element Steering Wheel for Heavy Vehicles, Testing and Modeling

    … of a truck steering wheel, using experimental testing and computer modeling. Statistics show a high risk of sustaining severe injuries, in a frontal crash of heavy vehicles, due to steering wheel rim to thorax contact. The Hybrid III crash test dummy is now also used for analyzing heavy vehicle …

    chalmers Repository record for Finite Element Steering Wheel for Heavy Vehicles, Testing and Modeling (opens in a new tab)

  5. Soccer Headgear Effects on Impact Profiles During a Heading Scenario

    … soccer. These headguards have been studied using crash test dummy heads mounted with various electronic instruments - accelerometers, gyroscopes, etc. The headgear-mounted dummy heads have been struck with various objects (soccer ball, another dummy head, pole, etc) to test for changes in head …

    clemson Repository record for Soccer Headgear Effects on Impact Profiles During a Heading Scenario (opens in a new tab)

  6. Vulnerable Road User head impact evaluation for bus front ends using Finite element model

    Numerical studies in crashworthiness have played an important role in optimizing vehicle design and making them pedestrian friendly. The developments seen in passenger vehicle exceeds the developments in bus when concerning pedestrian safety. Head injury is one of the most frequently sustained …

    chalmers Repository record for Vulnerable Road User head impact evaluation for bus front ends using Finite element model (opens in a new tab)

  7. Test method – Upper neck force and moment

    Crash tests are used to develop and improve vehicle safety and evaluate the injuries caused after a crash. In the neck, injury criteria such as NIC and 𝑁𝑘𝑚 estimate consequences of the crash. In a crash test dummy the upper neck load cell measures the force and the moments between the neck and the …

    chalmers Repository record for Test method – Upper neck force and moment (opens in a new tab)

  8. Finite Element Human Body Model-based Injury Prediction using Machine Learning: Development of simulation-based surrogate models for injury metrics

    … vehicles that affect the nature of vehicle crashes, HBM will become a necessary tool to assess safety. Detailed human anatomy representation in HBM, however, makes it computationally expensive and consumes a lot of time to simulate crash scenarios. The aim of this thesis was to evaluate …

    chalmers Repository record for Finite Element Human Body Model-based Injury Prediction using Machine Learning: Development of simulation-based surrogate models for injury metrics (opens in a new tab)

  9. Vehicle Occupant Kinematics prediction using Machine Learning: A study to understand applications of machine learning in prediction of vehicle occupant kinematics during crash and pre-crash

    … predictive modeling of occupant kinematics in crash scenarios. Finite Element Methods (FEM) involving discretization of Partial Differential Equations (PDEs) are widely used for vehicle crash and injury analysis involving Finite Element human body models (FE-HBMs). Doing a parametric study of …

    chalmers Repository record for Vehicle Occupant Kinematics prediction using Machine Learning: A study to understand applications of machine learning in prediction of vehicle occupant kinematics during crash and pre-crash (opens in a new tab)

  10. Low Severity Neck Injury from Side Impact

    … and the Loughborough University Co-operative Crash Investigation Study (UK) was undertaken to identify the typical factors associated with LSNI from side impacts. These factors were then used to determine the real-world cases to be reconstructed later in the thesis. As the occupants involved …

    vu-aus Download PDF for Low Severity Neck Injury from Side Impact (opens in a new tab)

  11. A Stochastic Approach for Parameter Relevance Estimation in Vehicle Interior Simulations of Frontal Impacts

    The evaluation of frontal crash performance of vehicles is mainly performed using standardized barrier tests and the safety system is designed against these. Innovation has led to improved technologies such as more accurate simulation models enabling us to improve how the safety system can work in …

    chalmers Repository record for A Stochastic Approach for Parameter Relevance Estimation in Vehicle Interior Simulations of Frontal Impacts (opens in a new tab)

  12. Assessment of injuries to the lower leg and head of pedestrians in vehicle-to-pedestrian collisions through FE simulations

    … were analyzed. Today, pedestrian regulatory tests consist of subsystem tests using impactors that are made to hit the vehicle; there is no use of any pedestrian crash test dummy. Hence, the kinematics of the impactors used in the testing procedure can be questioned. An alternative way to …

    chalmers Repository record for Assessment of injuries to the lower leg and head of pedestrians in vehicle-to-pedestrian collisions through FE simulations (opens in a new tab)

  13. Možnosti použití materiálů pro výrobu testovací figuríny

    … tématu možnosti použití materiálů pro výrobu testovací figuríny. V práci je charakterizováno, jak se vyvíjely nárazové figuríny, jaké nárazové figuríny jsou v současnosti k dispozici pro nárazové zkoušky a z čeho jsou vyrobeny. Hlavním cílem práce je návrh materiálů a postupu pro výrobu …

    brno-tech Repository record for Možnosti použití materiálů pro výrobu testovací figuríny (opens in a new tab)

  14. Development of a Modified Anthropomorphic Test Device for the Quantification of Behind Shield Blunt Impacts

    … duration. This work modified an Anthropomorphic Test Device (ATD) to be used for the characterization of behind ballistic shield blunt impact loading profiles. The modified ATD was instrumented to measure impacts at the hand, wrist, forearm, and elbow to compare the force transfer at different …

    mcmaster Repository record for Development of a Modified Anthropomorphic Test Device for the Quantification of Behind Shield Blunt Impacts (opens in a new tab)

  15. Differences between adult and pediatric neck muscle stress due muscle recruitment patterns

    … deaths and injuries of children, the first child crash test dummy was developed. The responses of this dummy were scaled from the adult response data based on the assumption that children were similar to adults both anatomically and physiologically, only children were smaller. It was also assumed …

    wayne-thes Repository record for Differences between adult and pediatric neck muscle stress due muscle recruitment patterns (opens in a new tab)

  16. DEVELOPMENT OF A FORCE SENSING INSOLE TO QUANTIFY IMPACT LOADING TO THE FOOT IN VARIOUS POSTURES

    … and ankle, must be developed to facilitate the testing and improvement of vehicle safety systems. Anthropomorphic Test Devices (ATDs) are one of the tools used to assess injury risk. These mimic the behavior of the human body in a crash while recording data from sensors in the ATD. Injury …

    mcmaster Repository record for DEVELOPMENT OF A FORCE SENSING INSOLE TO QUANTIFY IMPACT LOADING TO THE FOOT IN VARIOUS POSTURES (opens in a new tab)

  17. Entwicklung eines biofidelen Dummys zur Darstellung komplexer Verletzungen beim Fahrzeugcrash

    … Fahrzeugstrukturen spielt die Entwicklung von Crashtest-Dummys eine zentrale Rolle. Diese menschenähnlichen Puppen werden bei Crashtests eingesetzt, um die Auswirkungen von Kollisionen auf den Körper zu untersuchen. Der Stand des Wissens zeigt, dass aktuelle Crashtest-Dummys nach dem Prinzip …

    qucosa-diss

  18. Návrh dolní končetiny testovací figuríny pro nárazové zkoušky

    Tato diplomová práce je věnována tématu návrhu modelu dolní končetiny nárazové figuríny. Práce se zabývá historickým vývojem nárazových figurín až do současnosti, z jakého materiálu jsou vyrobeny a jaká je jejich vize do budoucna. Hlavním tématem práce je návrh modelu dolní končetiny pro nárazové …

    brno-tech Repository record for Návrh dolní končetiny testovací figuríny pro nárazové zkoušky (opens in a new tab)

  19. Návrh testovací figuríny pro nárazové zkoušky

    … diplomové práce je návrh konstrukčního řešení testovací figuríny pro nárazové zkoušky vozidla s chodcem. Na úvod práce je provedena rešerše v současné době používaných typů testovacích figurín. Následuje konstrukční část, ve které je nejprve pojednáváno o charakteristikách použitých materiálů …

    brno-tech Repository record for Návrh testovací figuríny pro nárazové zkoušky (opens in a new tab)