Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 2884 for “"Creep"”.

  1. A Study of the Relationship Between Indentation Creep and Uniaxial Creep

    … of the relationship between indentation creep and uniaxial creep. The data for this study was obtained by conducting both indentation and uniaxial creep experiments on amorphous selenium. Experiments were designed to collect data over a wide range of creep rates. Specific temperatures …

    utk-theses Repository record for A Study of the Relationship Between Indentation Creep and Uniaxial Creep (opens in a new tab)

  2. A Hybrid Constitutive Model For Creep, Fatigue, And Creep-fatigue Damage

    … fatigue is a coupling of independent creep, fatigue, and oxidation damage mechanisms that interact and accelerate microstructural degradation. A mixture of intergranular cracking due to creep, transgranular cracking due to fatigue, and surface embrittlement due to oxidation is often …

    ucf Repository record for A Hybrid Constitutive Model For Creep, Fatigue, And Creep-fatigue Damage (opens in a new tab)

  3. Measurement of Material Creep Parameters of Amorphous Selenium by Nanoindentation and the Relationship Between Indentation Creep and Uniaxial Creep

    … of this work was to measure the indentation creep parameters of amorphous selenium and to begin to develop a relationship between indentation creep and uniaxial creep. The data for this study was obtained by creating three different indentation creep experiments to test amorphous selenium …

    ut-knoxville Repository record for Measurement of Material Creep Parameters of Amorphous Selenium by Nanoindentation and the Relationship Between Indentation Creep and Uniaxial Creep (opens in a new tab)

  4. The creep and creep rupture of SMC-R50 under different thermomechanical conditions

    The creep and creep recovery behavior of a random fiber composite (SMC-R50) at elevated temperature and constant humidity were investigated experimentally and theoretically. The short time creep response for four constant stress levels at each of four selected temperature levels was experimentally …

    vt Repository record for The creep and creep rupture of SMC-R50 under different thermomechanical conditions (opens in a new tab)

  5. Transient creep in molybdenum

    … from 125°K to 300°K. The resulting transient creep could not be described by the logarithmic creep relation e = A divided by (1 + t) m as it can for the close-packed metals; however, the equation 6 = Ae- B delta e + Ce -D delta e was found to fit the data well. Activation volumes calculated …

    rice Repository record for Transient creep in molybdenum (opens in a new tab)

  6. Deformation kinetics of creep.

    … kinetics analysis of room temperature creep of high purity iron indicates two rate controlling mechanisms. The first of these is predominant during the initial part of the creep process and the second in the latter part when the internal stress increases and therefore the effective …

    ottawa-retro Repository record for Deformation kinetics of creep. (opens in a new tab)

  7. Creep of refractory concretes

    <p>Uniaxial compressive creep of a 90+% Al(,2)O(,3) and 50+% Al(,2)O(,3) refractory concrete was investigated. The creep behavior was evaluated as a function of aggregate packing, cement composition, and time at temperatures up to 2200(DEGREES)F and stresses up to 2500 psi;Refractory concrete crept …

    iastate Repository record for Creep of refractory concretes (opens in a new tab)

  8. Creep Deformation of Columns

    Made available in DSpace on 2014-12-04T23:10:52Z (GMT). No. of bitstreams: 1 0011487.pdf: 2107718 bytes, checksum: 7864aaae130879cdc8d247d36529a0b5 (MD5) Previous issue date: 1955

    uiuc Repository record for Creep Deformation of Columns (opens in a new tab)

  9. Characterisation of creep and creep crack growth properties in a novel heat resistant steel

    … resistance is expected to improve. Hence the creep performance is a major concern. However, creep testing such as stress rupture life requires long testing time, often years. It is useful therefore to generate an accelerated testing methodology to understand the creep performance of the …

    birmingham Download PDF for Characterisation of creep and creep crack growth properties in a novel heat resistant steel (opens in a new tab)

  10. Creep, Fatigue and Creep-Fatigue Interactions in Modified 9% Cr - 1% Mo (P91) Steels

    … many elevated temperature structural components. Creep-fatigue (C-F) interactions, along with oxidation, can accelerate the kinetics of damage accumulation and consequently reduce such components' life. Hence, reliable C-F test data is required for meticulous consideration of C-F interactions and …

    arkansas Repository record for Creep, Fatigue and Creep-Fatigue Interactions in Modified 9% Cr - 1% Mo (P91) Steels (opens in a new tab)

  11. Measurement of vertical spinal creep

    … or height. Changes in height are largely due to creep in the spinal tissues, especially in the intervertebral discs. Short-term loading results in an immediate relatively large loss of height which is quickly recovered when the load is removed. Sustainable loading causes the same quick loss …

    adelaide Repository record for Measurement of vertical spinal creep (opens in a new tab)

Page 1 of 145