Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 91 for “"Creep rupture"”.
-
Creep rupture of saturated undisturbed clays
… be time dependent. This is most evident during a creep test in which continual deformations are observed under constant stress conditions. In the laboratory, a specimen of cohesive soil subjected to a constant shear stress may fail after having deformed alt relatively slow rates for a considerable …
-
Statistical physics of creep rupture of heterogeneous materials
In this work, the creep behavior of heterogeneous materials, i.e., those subjected to a constant load, is studied using experimental, theoretical, and numerical approaches. Understanding how materials deform, damage, and approach failure is relevant in fields such as materials science, geophysics, …
-
Creep rupture and life prediction of polymer composites
… water, and others) must be established. Creep response under sustained load results in rupture but the time to rupture depends on environmental conditions. Creep rupture tests at higher fractions of ultimate failure load are often used to determine the time necessary to produce failure. …
-
Plane strain creep rupture of a saturated undisturbed clay
Undrained constant stress level creep rupture tests have been performed on an undisturbed, normally consolidated under K₀ conditions, sensitive clay in a rectangular (1" x 4" x 2¼" high) plane strain apparatus. The behaviour resulting from total stress paths of increasing δ₁ (keeping δ₃ constant) …
-
Creep Rupture Properties of Tin Tested at Constant Stress
This investigation was initiated to study the creep characteristics of a simple, relatively pure, material at constant stress as compared to that tested at constant load. Tin was selected for the investigation. A series of creep tests were run to rupture at constant stress and constant load. The …
-
Modeling and simulation of creep rupture in high-temperature alloys
… well established that one of the main causes of rupture in high-temperature alloys is intergranular cavitation: the nucleation, growth, and coalescence of voids along grain boundaries. It is also well known that intergranular voids grow under the influence of several physical processes, including …
-
The creep and creep rupture of SMC-R50 under different thermomechanical conditions
The creep and creep recovery behavior of a random fiber composite (SMC-R50) at elevated temperature and constant humidity were investigated experimentally and theoretically. The short time creep response for four constant stress levels at each of four selected temperature levels was experimentally …
-
Metallurgical Effects on Long-Term Creep-Rupture in a New Nickel-Based Alloy
<p>A series of creep-rupture studies were conducted on a new nickel-based alloy, Inconel Alloy 740, for use in Advanced Ultrasupercritical (A-USC) Steam boiler applications. The research quantitatively showed, for the first time, that the formation of a small amount of eta phase during long-term …
-
Effect of Porosity on the Creep Rupture Behavior of Low Alloy Steel Weldments.
… the effects of porosity on the high temperature creep characteristics of low-alloy steel weldments. The material selected for investigation was ASTM A387-D, a 2-1/4% Chromium - 1% 15 Molybdenum low-alloy steel. This material is used in the fabrication of nuclear and petro-chemical reactor …
-
Effect of Temperature on Short-Term Creep Rupture Response in Polymer Matrix Pultruded Composites
… are subjected to both static tensile loading and creep loading at different temperatures. Of these specimens, some are unnotched, while others have holes of different sizes in them. In this way, short term creep rupture and notch sensitivity can be determined as a function of tensile strength and …
-
Simulation of Fatigue Performance & Creep Rupture of Glass-Reinforced Polymeric Composites for Infrastructure Applications
… Model has been developed. The model simulates creep rupture by imposing a fixed load of constant stress on the composite over the simulation duration. Simulation of the fatigue of glass fiber-reinforced composites is achieved by replacing the constant stress parameter in the model with a …
-
The effect of the interphase/interface region on creep and creep rupture of thermoplastic composites
… region on the static mechanical properties, creep and creep rupture behavior of thermoplastic (J2) composites was investigated. The mechanical properties of the J2 composites were altered by systematic changes in fiber surface chemistry. Four fiber systems were used including the AU4, AS4(1) …
-
Compression Creep Rupture of an E-glass/Vinyl Ester Composite Subjected to Combined Mechanical and Fire Loading Conditions
Polymer matrix composites are seeing increasing use in structural systems (e.g. ships, bridges) and require a quantitative basis for describing their performance under combined mechanical load and fire. Although much work has been performed to characterize the flammability, fire resistance and …
-
Individual and interactive influence of temperature, stress, physical aging and moisture on creep, creep rupture and fracture of epoxy matrix and its composite
… degradation in modulus and strength, measured by creep and creep rupture tests. Previous studies on creep of polymer composites focused on the individual and interactive effect of one or more of factors such as Stress-Temperature, Stress-Temperature-Physical Aging and Stress-Temperature-Moisture. …
-
Time-dependent damage evolution in multidirectional polymer matrix composite laminates
… time-dependent degradation in strength (known as creep-rupture) and modulus (known as creep), is an important concern in these applications. Despite the experimental evidence on the influence of time-dependent damage on creep and creep rupture of multi-directional composites, current level of …
-
Creep, fatigue, and environmental response of Alloy 800H tested at 900 degrees C
Creep and creep rupture studies have been carried out at 900$\sp\circ$C in lab air and in vacuum on Alloy 800H. Three different notch acuities were chosen so that the effect of stress intensity on the rupture lifetimes could be examined. The effect of oxidation on the creep rupture lifetimes has …
Page 1 of 5