Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 45 for “"Crest factor"”.
-
Digital modulators with crest factor reduction techniques
… power Ratio (PAR), also known as the Crest Factor (CF). The Global System for Mobile communication (GSM) is a widespread second-generation (2G) system that uses constant envelope Gaussian minimum shift keying modulation. The advantage achieved by constant envelope modulation is the …
-
Distortion-based crest factor reduction algorithms in multi-carrier transmission systems
Distortion-based crest factor reduction (CFR) algorithms were studied in orthogonal frequency division multiplexing (OFDM) and multiple-input multiple-output (MIMO) OFDM systems to reduce the nonlinear distortion and improve the power efficiency of the transmitter front-end. First, definitions of …
-
Crest Factor Reduction and Digital Predistortion of RF Power Amplifiers Driven by Carrier Aggregated Signals
… A second approach is the deployment of crest factor reduction (CFR) techniques to effectively reduce the PAPR of the signal. To date, significant progress has been reported in the literature in both of these areas, but only in the context of single-band multi-carrier signals. Recently, …
-
Adaptive digital predistortion for wideband high crest factor applications based on the WACP optimization objective
… is the need to accommodate their very high Crest Factor, also known as Peak-to-Average Power Ratio, during transmission. Compared to other communication signals transmitted with the same average power, these signals generate greater transmitter distortion since their larger signal peaks …
-
Design considerations in multi-carrier code division multiple access
… good bit error rate performance, low crest factor, and low complexity. The investigation includes the selection of spreading codes, as well as the code length and the number of subcarriers. Following sections detail the interleaver design and the channel estimation technique chosen for …
-
Advanced Single-Stage Power Factor Correction Techniques
Five new single-stage power factor correction (PFC) techniques are developed for single-phase applications. These converters are: Integrated single-stage PFC converters, voltage source charge pump power factor correction (VS-CPPFC) converters, current source CPPFC converters, combined voltage …
-
Mobile Hybrid Power System Theory of Operation
… most energy efficient. This is because the high crest factor loads, of many applications, decrease the fuel efficiency of a hydrocarbon generator. To understand this, we need to understand how an electrical load affects a generator. Starting with a load profile, a system designer must choose a …
-
In situ blocked force measurement in gearboxes with potential application for condition monitoring
… domain of the vibration signal (kurtosis, RMS, crest factor and skewness) were used for detecting and diagnosing the faults by applying them to filtered signals. As a result, the noise might be removed or reduced but the effect of the housing remains. Then, the total energy was also applied to …
-
An improved electronic ballast for the fluorescent lamps
… high frequency ac source to implement the power factor correction (PFC), has become an attractive topology for ballasting the fluorescent lamps because it eliminates the use of a bulky boost inductor. But the high voltage stress on the semiconductor devices at light load conditions, the high …
-
Gear Fault Detection Using Non-Contact Magnetic Rotation Position Sensors
… extraction on the TE using RMS, Kurtosis and Crest Factor was used to quantify gearbox dynamics. These features were able to measure dynamic changes in gearbox health, such as wearing in the gears or the progression of a fault resulting in full tooth failure. These sensor attributes are ideal …
-
Vibrodiagnostika elektrických strojů
… metoda. Patří sem i další metody jako Kurtosis factor, Crest factor apod. Dále je v práci základní blokové schéma pro měření vibrací. Toto blokové schéma je naprogramováno a je pro něj udělané grafické uživatelské prostředí. V poslední části je vyhodnocení naměřených dat daných motorů.
-
Vibrodiagnostika elektrických strojů
… směrech. Dále je popsána metoda měření Crest Factorem a shrnutí dalších diagnostických metod vibrodiagnostiky jako například Obálková analýza a Kurtosis faktor. K jakým účelům jsou tyto metody využívány a jejich výhody a nevýhody. V praktické části byli změřeny 4 asynchronní motory s …
-
Modeling Predictors of Whole Body Vibration Exposure among Saskatchewan Farmers: a Key Step in Low Back Disorder Prevention
… been recognized as a significant physical risk factor associated with LBP. The agriculture sector has high whole body vibration exposures related to various machine types; however, little research has assessed vibration exposure in farming due to the inconvenience and cost of direct data …
-
Metodologia de excitação para identificação de parâmetros dinâmicos de selos anulares
… of iterative algorithms, which reduce their crest factor and therefore improve the input Signal-to-noise ratio, are also included in this work. Two small-scale test rigs with electromagnetic actuators, developed in the Acoustics and Vibration Laboratory of the Federal University of Rio de …
-
Design of Optimized Broadband Excitation Signals for Consistent Impedance Spectroscopy Measurements
… In the second method, the optimization of the crest factor was realized based on a transformation by the generalized sigmoid function to limit the signal to the linear range, followed by clipping to eliminate the remaining peaks. Compared to common methods that rely solely on clipping, the …
-
Controlled Voltage of Hot Snare Polypectomy Device in Electrosurgical Device
… was measured for a magnitude of 1Vpp, and the crest factor obtained was 1.5 with a voltage of 1.088v and 1.0519v for both the LabView and Oscilloscope respectively for the Electrosurgical Unit of 350kHz. The power control gives 0.4W, 2.04W, and 3.01W for the power peak at 1, 2, and 3 seconds …
-
Η άμεση επίδραση του καπνίσματος στη λειτουργικότητα του αναπνευστικού, στα στηθακουστικά ευρήματα και στο εκπνεόμενο μονοξείδιο του αζώτου (NO) σε νεαρούς ενήλικες
… demonstrating a significant variation of crest factor, a well established measurement of sound analysis.In conclusion, smoking of a single cigarette in young adult “healthy” smokers has an immediate effect in respiratory mechanics, respiratory sound properties and on exhaled Nitric Oxide.
Page 1 of 3