Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 73 for “"Critical buckling load"”.

  1. Lateral Torsional Buckling of Wood I-Joist

    … this makes them susceptible to lateral torsional buckling failure. Continuous beam spans and uplift forces on roof uplift are potential scenarios where lateral instability can occur and reflects the need to investigate the lateral torsional buckling behavior of wood I-joists. Within this context, …

    ottawa-retro Repository record for Lateral Torsional Buckling of Wood I-Joist (opens in a new tab)

  2. Buckling of Circular Sandwich Plates

    … the analysis and solution for determining the critical buckling load of a fixed edge and simply supported circular sandwich plates under uniform lateral and edgewise load, by application of the variation principle and considering the shear deformation effect.

    marquette Repository record for Buckling of Circular Sandwich Plates (opens in a new tab)

  3. Effects of interfacial debonding and fiber breakage on static and dynamic buckling of fibers in matrices.

    Analyses were performed for static and dynamic buckling of a continuous fiber embedded in a matrix and fiber breakage in order to determine the effects of interfacial debonding on the critical buckling load and the domain of instability. A beam on elastic foundation model was used for this study. …

    nps Repository record for Effects of interfacial debonding and fiber breakage on static and dynamic buckling of fibers in matrices. (opens in a new tab)

  4. Stability and reliability analysis of metal plate connected wood truss assemblies

    … assemblies were also carried out to study the critical buckling load and lateral bracing force. The program predictions were in good agreement with the test results. A reliability analysis was conducted for a simplified MPC wood truss assembly using the developed program. The effect of the …

    ubc Repository record for Stability and reliability analysis of metal plate connected wood truss assemblies (opens in a new tab) Download PDF for Stability and reliability analysis of metal plate connected wood truss assemblies (opens in a new tab)

  5. Mechanical and Electromagnetic Optimization of Structurally Embedded Waveguide Antennas

    … far-field gain and separately for the maximum critical buckling load. Using the two separate optima as utopia points, a multi-objective optimization for the peak far-field gain and critical buckling load is performed, to obtain a balance between EM performance and structural strength. This …

    vt Repository record for Mechanical and Electromagnetic Optimization of Structurally Embedded Waveguide Antennas (opens in a new tab)

  6. Critical buckling and post-buckling behavior of thin-walled liners encased by underground pipelines in saturated soils

    … external hydrostatic pressure, a concentrated load, temperature change or their combination, and develop a simplified circular arch model of thin-walled liners when not constrained by the pipelines. The friction and adhesion on the interface between a liner and its constraining surface …

    must-thes Repository record for Critical buckling and post-buckling behavior of thin-walled liners encased by underground pipelines in saturated soils (opens in a new tab)

  7. Investigation of textile resistance to puncture by micro-penetrators with geometry of mosquito proboscis

    … the simulated proboscis effective length on the critical buckling load, and (d) conducting a sample size sensitivity analysis. The enhanced micro-PPT was to be conducted on five fabrics and the results were to be compared with an enhanced live-mosquito blood-feed (LMBF) test recently developed at …

    bu Repository record for Investigation of textile resistance to puncture by micro-penetrators with geometry of mosquito proboscis (opens in a new tab)

  8. Design of Slender Columns in Multi-Story Buildings

    … which is a function of the factored axial load Pu and the critical buckling load Pc for the column. The column is then designed for this magnified moment. A comparison of the two design procedures shows that the ACI 318-(8J) procedure is more consistent and takes each case (braced, …

    marquette Repository record for Design of Slender Columns in Multi-Story Buildings (opens in a new tab)

  9. Adhesion Strength of Cordierite Bulk Coatings on Molybdenum Substrates

    … toughness was determined from indentation load vs. crack length data by examining the residual stress and critical buckling load of the ceramic coatings. The interfacial fracture toughness values obtained using a slightly different indentation analysis agree with those in the literature. …

    vt Repository record for Adhesion Strength of Cordierite Bulk Coatings on Molybdenum Substrates (opens in a new tab)

  10. Lateral buckling of tapered, cantilever I-beam

    … on the lateral stability of a cantilever I-beam loaded with a point load at its end in the plane of maximum flexural rigidity. Both the flange and the web are tapered linearly. The load is allowed to move with the structure as it deflects, but its direction does not change, i.e., the load remains …

    rice Repository record for Lateral buckling of tapered, cantilever I-beam (opens in a new tab)

  11. Lateral buckling of uniformly loaded, tapered, cantilever I-beams

    … taper on the lateral stability of a uniformly loaded, cantilever I-beam. The I-beam is loaded along its entire length in the plane of maximum flexural rigidity. The web and flanges are tapered linearly from the free end to the fixed end. Results are obtained for three positions of load …

    rice Repository record for Lateral buckling of uniformly loaded, tapered, cantilever I-beams (opens in a new tab)

  12. Influence of Creep on the Stability of Pultruded E-Glass/Polyester Composite Columns at Elevated Service Temperatures

    … columns subjected to sustained concentric axial loading at elevated service temperatures. Six creep tests were performed on columns having a slenderness ratio of 49 at different combinations of axial load and temperature for a duration of at least 1,000 hours. The axial loads used represented …

    gatech Repository record for Influence of Creep on the Stability of Pultruded E-Glass/Polyester Composite Columns at Elevated Service Temperatures (opens in a new tab)

  13. Nonlinear behaviour and design of steel built-up columns under axial and transverse loading

    … place due to local elastoplastic failure of the critical panel. Finally, an analytical method for the evaluation of the elastic critical buckling load, structural response and collapse load of imperfect laced built-up members under axial and transverse loads based on Timoshenko beam theory is …

    greece Repository record for Nonlinear behaviour and design of steel built-up columns under axial and transverse loading (opens in a new tab)

  14. Dynamic analysis and buckling of variable thickness laminated composite beams using conventional and advanced finite element formulations

    … geometric stiffness (for constant axial load, uniformly distributed axial load, and non-uniformly distributed axial load), and mass matrices. Second a new formulation (advanced formulation) is established, which considers not only the geometric boundary conditions, but also the natural …

    concordia Download PDF for Dynamic analysis and buckling of variable thickness laminated composite beams using conventional and advanced finite element formulations (opens in a new tab)

  15. Μεθοδολογία ανάλυσης και προκαταρκτικού σχεδιασμού μη-συμβατικών αεροναυπηγικών δομών

    … structures such as weight reduction, payload increase etc. have led the aerospace industries develop unconventional structures and partially substitute the metallic materials of the primary structures with composites. The current trend of designing and evolving unconventional aerospace …

    greece Repository record for Μεθοδολογία ανάλυσης και προκαταρκτικού σχεδιασμού μη-συμβατικών αεροναυπηγικών δομών (opens in a new tab)

  16. A study of the behavior of a composite concrete and steel column under the influence of combined axial and flexural loads

    … modulus of elasticity in order to compute the critical buckling load of the member in compression. The composite specimens of this study had a slenderness ratio, 1/k « 62.7 and were not in the Euler range of buckling. The application of the tangent modulus or double modulus for analysis in the …

    rice Repository record for A study of the behavior of a composite concrete and steel column under the influence of combined axial and flexural loads (opens in a new tab)

  17. Design for Additive Manufacturing (DfAM) framework for integrating structural optimization, path planning and manufacturing signatures in automated composites manufacturing

    … the performance under axial compressive loads. As a proof of concept, an open rectangular cutout from a curved, conical-cylindrical shell as part of a rocket fairing is considered. First, an optimal straight-fiber configuration is selected and used as the benchmark. Curvilinear fiber …

    washington Repository record for Design for Additive Manufacturing (DfAM) framework for integrating structural optimization, path planning and manufacturing signatures in automated composites manufacturing (opens in a new tab)

  18. Mechanical and thermal buckling of thin films

    … patterns can be generated through the mechanical buckling of a thin film. In this thesis, we focus on the buckling mechanism. The wavy patterns are generated when the thin elastic film is subjected to an in-plane compressive stress and by the application of controlled heating. We first introduce …

    missouri Repository record for Mechanical and thermal buckling of thin films (opens in a new tab)

  19. Three-dimensional elasticity models for buckling of anisotropic and auxetic beams and plates

    … elasticity model is developed to determine the critical buckling load for isotropic, anisotropic, and auxetic beams and plates. Different beam theories are studied and compared to the elasticity theory. The study was based on the assessment of those beam theories using different beam …

    colostate Repository record for Three-dimensional elasticity models for buckling of anisotropic and auxetic beams and plates (opens in a new tab)

  20. Vibration, buckling and postbuckling of laminated composites with delaminations

    Free vibration, buckling and postbuckling analyses of laminated composite plates with multiple delaminations are presented. A fInite element method based on a layer-wise laminated composite plate theory is developed to formulate the problem. Geometric nonlinearity in the sense of von Karman and the …

    vt Repository record for Vibration, buckling and postbuckling of laminated composites with delaminations (opens in a new tab)

Page 1 of 4