Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 190 for “"Critical load"”.
-
Dynamics of power systems at critical load levels
… from a dynamic viewpoint in the context of critical modes of the linearized system matrix. The eigenvalue algorithms have been used to establish a correspondence between the critical modes and certain system states. Two case studies have been performed to analyze the dynamic nature of the …
-
Structural Performance of Manufactured Homes in Wind Zones II and III: Evaluation of Critical Load Path Connections
… the structural performance of their key vertical load path connections, namely sheathing-to-rafter (STR), roof-to-wall (RTW), and wall-to-floor (WTF) joints. Previous research has primarily focused on anchorage systems only; however, even for these systems, comprehensive post-disaster performance …
-
Reliability, Availability and Resilience Assessment of Heating Systems Using Sequential Monte-Carlo Simulation and Critical Load Analysis. Masters thesis, Concordia University
… such as Energy Not Served (ENS) and Loss Of Load Expectation (LOLE) are evaluated using sequential Monte Carlo (SMC) simulation. SMC is a probabilistic approach that is able to capture the random failures and behaviour of the systems over a defined sequence of time. To evaluate the energy …
-
Techniques for measuring critical loads in the presence of non-negligible higher mode imperfections
… with the Southwell Plot method for measuring the critical load of thin-walled structural members whose postbuckling behavior is stable-symmetric.</p><p>In this method measurements are taken of the structure's central lateral deflection versus membrane compressive load P. Southwell's hypothesis is …
-
Static and dynamic stability analysis of a truss model
… truss model· is subjected, separately, to static loads, dynamic step loads, and dynamic impulse loads. For each loading, the results are presented in the form of stability boundaries and displacement criteria. For the static loading, the stable equilibrium displacement fields are determined by …
-
BUCKLING OF PLATES WITH ALLOWANCES FOR SHEAR AND PREBUCKLING INPLANE DEFORMATIONS
… circular plates under uniform radial inplane loading and simply supported rectangular plates under biaxial loading. Exact formula linking the Mindlin critical load to the corresponding Kirchhoff critical load is derived for simply supported, general polygonal plates and simply supported and …
-
Stability analysis of the Church of the Nazarene Varax dome
… Church of the Nazarene Varax dome under various load distributions. A model of the dome constructed using I-DEAS is presented and results of linear and nonlinear analyses are discussed. A comparison between the critical load obtained using nonlinear analysis and combined linear and nonlinear …
-
Combined linear/nonlinear stability analysis of plane and space frames
… effectiveness of the combined analysis for the critical load predictions. Several test problems and a glulam dome cap are analyzed, and the critical load prediction curves and the nonlinear equilibrium paths are presented. It is verified that the B33 finite element in ABAQUS is capable of …
-
A critical assessment of crack growth criteria in unidirectional composites
… subjected to uniform in-plane remote loading. The purpose of this study is to gain a better understanding of several theoretical models for predicting the direction of crack propagation and the level of load causing crack extension, and to present a new model for predicting the …
-
New Truck Loading Model For Rural Bridges In Saskatchewan
… lack of existing information on estimating the critical load effects occurring on short span bridges, on low traffic roadways, and over specific reference periods makes it difficult to perform the bridge evaluations with an adequate degree of confidence. This study focuses on aspects of the …
-
Critical behavior of rectangular frames considering the influence of non-linear flexible connections and lateral bracing in the presence of primary bending moments.
… connections, it has been assumed that frames are loaded in such a manner that no bending moments are present when instability is initiated. Apparently, this condition is not fulfilled for many frame work systems that are designed in principle to undertake bending moment. The question arises as to …
-
Lateral torsional buckling of rectangular reinforced concrete beams
… Each beam was subjected to a single concentrated load applied at midspan by means of a gravity load simulator that allowed the load to always remain vertical when the section displaces out of plane. The loading mechanism minimized the lateral translational and rotational restraints at the load …
-
Stability analysis of a spaceframe structure
… and flexural end shortening of a member. The critical condition is defined by the load which makes the tangent stiffness matrix of the structure become singular. Three methods for obtaining the critical load are presented: determinant plot, Southwell plot, and load-deflection curves. The …
-
Nanoindentation Techniques for the Evaluation of Silicon Nitride Thin Films
… of the properties of these films under diverse loading and failure conditions is a necessary prerequisite to their use in biomedical devices. Three wafers of silicon nitride-coated silicon were obtained from Lawrence Livermore National Laboratory and used to create 96 samples. Samples were …
-
Nonlinear Stability Analysis of Frame-Type Structures with Random Geometric Imperfections Using a Total-Lagrangian Finite Element Formulation
… imperfections will become unstable at a load less than a specified fraction of the perfect critical load. The overall objective of this dissertation is to present such a method for frame-type structures that become unstable at limit points. The overall objective may be broken into three …
-
Energy management in microgrids
… (DERs), Energy Storage, and Controllable Loads. It is connected to the main grid through the Point of Common Coupling (PCC). The main objective of this research is to optimize energy flow within a microgrid with regards to economic dispatch, reliability and availability in both grid …
-
Flutter instability in structural mechanics: theory and experimental evidence
… of the University of Trento. Elastic structures loaded by nonconservative positional forces are interesting from different perspectives. First, they are subject to flutter instability, a dynamical instability which remains undetected using static approaches. Second, in these structures …
-
Large deflections and imperfection sensitivity of structural systems
… ideal system and further the rate at which the load capacity of the ideal system changes near the critical load. A general non-linear stiffness matrix capable of predicting the post-buckling behaviour of structural systems is developed and tested. A procedure is formulated for predicting the …
-
Optimization-based design of microgrids for critical loads
… and sustainable alternatives for powering up critical loads. In recent years, microgrids with renewable generation have emerged as a promising technology for powering critical loads as they can achieve high power supply reliability and low carbon footprint. To meet the requirements of critical …
-
Cyber-physical systems of microgrids and control strategies for enhancing electrical grid resilience
… group of distribution, generation, storage, and loads. The concept has emerged to utilize renewable energy and increase resiliency of power systems. Modern microgrids rely on sophisticated communication and controls, which require them to interact with cyber-physical systems. In addition, this …
Page 1 of 10