Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Cross - hole"”.
-
Blast damage assessment using ultrasonic cross-hole measurements
Includes bibliographical references.
-
Cross-hole GPR imaging : traveltime and frequency-domain full-waveform inversion
… (FWI) techniques for application to borehole GPR surveys. Ray-based traveltime inversion is attractive for its speed, reliability, and ability to work in 3D, but the ray approximation involved limits recoverable detail to greater than one wavelength. The traveltime method presented here …
-
Forward modelling and imaging method studies for cross-hole radio imaging (RIM) data.
The radio imaging method (RIM) is a cross-hole electromagnetic (EM) method which employs radio frequency EM waves to estimate the electric properties between boreholes. RIM is applied in hard rock mining to find and delineate sulfide mineral deposits. A basic and relatively simple method for …
-
Innovative Application of FLUTe™ Liners for Cross-Hole Hydraulic Testing in Crystalline Bedrock Aquifers
… FLUTe™ liners as a means for assessing cross-hole fracture connectivity. FLUTe™ liners are used to generate a new style of hydraulic pulse into the aquifer, with pressure response monitored in a nearby network of open boreholes. Preliminary testing reveals the potential for this method …
-
Application of the cross-hole radio imaging method in detecting geological anomalies, MacLennan township, Sudbury Ontario
… to explore the rock properties between two boreholes MAC104 and MAC100G, which are about 182 m apart, on the Nickel Rim South property (MacLennan Township) 22 km northeast of Sudbury. Tomographic data were collected and processed at 625 kHz and 1250 kHz. One data set has the transmitter in …
-
Single- and cross-hole pneumatic injection tests in unsaturated fractured tuffs at the Apache Leap Research Site near Superior, Arizona
… the experimental design of single- and cross-hole pneumatic injection tests, including borehole configuration and testing schedules, data collection system, interpretive models developed and tested, data, and conclusions. Single-hole tests were interpreted by Guzman et al. (1996) by …
-
Numerical inverse interpretation of pneumatic tests in unsaturated fractured tuffs at the Apache Leap Research Site
… fractured medium through analysis of singleand cross-hole pneumatic tests. Over 270 single-hole [Guzman et al., 1996] and 44 cross-hole pneumatic tests [Illman et al., 1998; Inman, 1999] were conducted in 16 shallow vertical and slanted boreholes in unsaturated fractured tuffs at the Apache Leap …
-
Theoretical and field studies of fluid flow in fractured rocks
… background. It consists of conventional single-hole packer tests in conjection with a newly developed cross-hole packer test. The cross-hole method involves injecting fluid into a packed-off interval in one borehole and monitoring hydraulic head variations in packed-off intervals in neighboring …
-
Γεωφυσικές διασκοπήσεις εντός γεωτρήσεων και σηράγγων
… electrical and seismic tomography between boreholes, mainly in the detection of finite-dimensional structures. The existence of such structures in the subsurface is frequent, highly correlated with archaeological, environmental and geotechnical problems (archaeological sites, caves, …
-
Characterization of the gas and liquid transport rates and H2SO4 concentration and distribution within an above ground, commercial scale sulphur block
… in both the horizontal and vertical directions. Cross hole tests appeared to produce the most representative estimates of Kg due to the negation of turbulence that arises in the vicinity of the borehole. The choice of gas used in the analysis had negligible effect on the resulting Kl in contrast …
-
Hydrologic mechanisms and optimization of in-situ copper leaching : case study-BHP Copper, San Manuel, Arizona
… hydraulically dynamic environment. A hydraulic cross-hole testing procedure termed "Cyclic Pulse Testing" (CPT) was used to overcome this issue. Over 100 pressure responses obtained via CPT at the two test sites were examined by means of type curve analysis. The spatially distributed hydraulic …
-
An examination of scale-dependent electrical resistivity measurements in Oracle granite.
… ensemble fracture behavior in situ, a series of cross-hole and single-hole electrical conductivity measurements were made within saturated Oracle granite. The tests were conducted with a point source and a point reference electrode and employed electrode separations ranging from 8 inches to over …
-
Hydraulic Tomography Analyses of Different Datasets for Subsurface Heterogeneity Characterization at Various Scales
… Study 4 evaluates the usefulness of field cross-hole flowmeter measurements in mapping spatial K distribution through Steady-State Hydraulic Tomography (SSHT) analysis at a highly heterogeneous field site located on the University of Waterloo. Results from these studies mainly reveal that: …
-
Waterflood monitoring using borehole self-potential data
A cross-hole imaging technique is developed to follow the evolution of an oil-water encroachment front over time during the water flooding of an oil reservoir. I simulate borehole electric potentials associated with a two-phase flow between two wells in a heterogeneous reservoir. The flow of the …
-
Hydraulic Testing of the Big Hole Fault, Northern San Rafael Swell, Utah
Six cross-hole packer tests were conducted at the Big Hole fault, a dip-slip normal fault in the northern San Rafael Swell of east-central Utah. Three tests were conducted at each of two locations along the fault, each location having a different total displacement. Water was injected in the …
-
Desenvolvimento e aplicação do cone sísmico
… são comparados a resultados de ensaios de cross-hole existentes no referido local.
-
High-Frequency Shallow Seismic Reflection Characterization of Overburden at an Abandon Pb-Zn Mine Beneath U.S. Highway 69 in Treece, Kansas Using Seismic Imaging and Vp/Vs Ratio
… of roof rock failure using elevation surveys and cross-hole seismic surveys. The project described in this thesis focuses on characterizing the fitness of the mine overburden. Two seismic reflection surveys were conducted within a 2.4 km segment of U.S. Highway 69 in extreme SE Kansas. The …
-
Measurement and Modeling of Anisotropic Spatial Variability of Soils for Probabilistic Stability Analysis of Earth Slopes
… strength envelope. Vertical (down-hole) and horizontal (cross-hole) geostatistical analysis was conducted to assess the anisotropy of the semivariogram. The investigation identified that heterogeneous inclusions had significant impacts on the results, but that simplistic (visual) …
-
EFFECTS OF SOIL CROSS-SECTIONAL MODELING ON THE SITE DESIGN SPECTRA AND FUNDAMENTAL PERIOD
… can be determined by invasive tests such as cross-hole tests, or by the more economical non-invasive tests such as Controlled Source Spectral Analysis of Surface Waves method, which is also referred to as the CXW test. In addition, NEHRP Provisions require modeling of only the top 30 m of the …
-
Επιφανειακά κύματα: εφαρμογές σε περιβαλλοντικά και γεωτεχνικά προβλήματα
… results for real data, collected close to a cross-hole survey. These data were inverted using the developed algorithms and commercial processing software. The proposed methodology of seismic processing with MASW method including 2 different inversion techniques (damping and combination of …
Page 1 of 2