Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Cross Axis"”.
-
The effects of transducer cross-axis sensitivity in modal analysis
… spite of manufacturers' efforts to minimize the cross-axis sensitivity of their transducers, most transducers used to measure the response of the structure have a primary sensing axis and a perpendicular plane which contains a direction of maximum cross-axis sensitivity. Due to the cross-axis …
-
Cross-Axis Saccade Adaptation in Humans and Marmosets: Behavior and Neurophysiology
… adaptation of saccadic eye movements during a cross-axis adaptation task. The work began with a careful analysis of eye movements in human subjects and concludes with neurophysiological recordings from the Purkinje-cells (P-cells) of the cerebellar cortex. In Chapter 2, we examined cross-axis …
-
Biodynamics of the seated human body with dual-axis excitation: nonlinearity and cross-axis coupling
… vibration in an orthogonal direction (i.e., the cross-axis coupling). The principal objective of the research reported in this thesis was to identify how the resonances in the apparent mass and transmissibility, and their association, depends on the magnitude of the inline vibration excitation …
-
Cross-axis movements of the seated human body in response to whole-body vertical and fore-and-aft vibration
… the forces in the direction of excitation and cross-axis apparent mass in the other directions.</p> <p>In all experiments, male subjects were exposed to random vibration at 0.125, 0.25, 0.625 and 1.25 ms<sup>-2</sup> r.m.s. The frequency range differed between the different studies. However, a …
-
Biodynamic Responses of the Seated Occupants to Multi-Axis Whole-Body Vibration
… The seated body biodynamic responses to single axis vibration have been investigated widely under vertical axis and a few under individual horizontal axis. The responses to simultaneous three-axis vibration, as encountered during vehicle driving, however, have been investigated in two recent …
-
Structural Health Monitoring of Nonlinear Beam under Combined Translational and Rotational Vibration
… microstructure due to fatigue damage and 3) cross-axis coupling due to multiaxial loading. The loading intensity and number of vibration cycles intensified these nonlinearities. The damage precursor feature is acquired by quantifying the reduction in the nonlinear stiffness term in the …
-
Dichotomy of Wall and Dwelling: Four Pavilions and a Tower, A Dwelling in Etlan, Va
This project focuses on the wall as a cross-axis form, one which gives an order to the landscape and a reference for the rest of the building to be set against. The intersections of these walls produce four corners housing four pavilions for dwelling. As the walls extend over the landscape, it …
-
Localised biodynamic responses of the seated human body during excitation by vertical vibration
… supported. For all postures, the fore-and-aft cross-axis forces showed a slightly lower principal resonance frequency at the middle thighs and front thighs than at the ischial tuberosities. It is suggested that more than one mode contributes to the resonance in the fore-and-aft cross-axis …
-
EFFECT OF MULTIAXIAL VIBRATION ON FATIGUE DURABILITY OF ELECTRONIC ASSEMBLIES POPULATED WITH SHORT AND LIGHT COMPONENTS
Multiaxial vibration can lead to nonlinear cross-axis interactions, which can significantly affect the fatigue durability of electronic printed circuit assemblies. Depending on the frequency and phase relationship between the in-plane and out-of-plane excitations, there can be significant reduction …
-
Quasi-zero Stiffness Magnetic Springs: Stability, Nonlinearity, and Control for Vibration Isolation
… in the rotational DOF around the vertical axis. An experimental rig is developed with detailed consideration of actuators and sensors, although complete commissioning is affected by COVID-19. The design constraints are integrated into simulations to ensure realism. The thesis transitions to …
-
Integration of differential GPS and inertial navigation using a complementary Kalman filter
… to the Schuler cycle, biases, noise floor, and cross-axis sensitivity. In order to design and verify a precise, high update rate navigation system, a working model of Differential GPS has been developed including all of the major GPS error sources - clock differences, atmospherics, selective …
-
Applications of inertial measurement units in monitoring rehabilitation progress of arm in stroke survivors
… tracks linear motions in 2D, such that only one axis can experience motion at any given time. The algorithm has high (>95%) accuracy. Data representing linear human arm motion along a single axis is generated to analyze and determine optimal parameters of Kalman filter. Cross-axis sensitivity of …
-
Micromachined semi-circular canals: Bio-inspired approaches for rotational Inertial sensing
… two orders of magnitude suppression of cross-axis angular accelerations and inherent insensitivity of the sensor to linear accelerations from its geometrical constraints. The thermal design validates and verifies the potential of the toroidal platform as a rotational inertial sensing …
-
Rapid, Approximate Multi-Axis Vibration Testing
Sequential single-axis vibration testing strategies often produce over-testing when qualifying system hardware. Multi-axis excitation techniques can simulate realistic service environments, but the hardware and testing strategies needed to do so tend to be costly and complex. Test engineers instead …
-
Stress Response of Tall and Heavy Electronic Components Subjected to Multi-axial Vibration
… durability testing on electronic assemblies one axis at a time – in what is termed sequential single degree of freedom (SSDoF) testing. SSDoF testing has been shown to produce lower fatigue damage accumulation rates than simultaneous MDoF testing, in the leads of tall and heavy electronic …
-
PERFORMANCE ENHANCEMENTS OF MICRO CORIOLIS VIBRATORY GYROSCOPES THROUGH LINEARIZED TRANSDUCTION AND TUNING MECHANISMS
… force-balanced electrostatic frequency tuners. Cross-axis stiffness is also reduced through folded-flexure moment balancing to further reduce ARW. By balancing positive and negative Duffing frequency contributions, net fractional frequency nonlinearity was reduced to -20 ppm. The gyroscope …
-
Approaches to the synthesis, modelling and optimisation of spatial translational compliant parallel mechanisms
… Such motion characteristics can include cross‐axis coupling, lost motion, parasitic motion and actuation stiffness. If the motion characteristics of an XYZ CPM need to be improved, the XYZ CPM can be reconfigured using the PSR approach. For example, two PSR‐based optimization approaches …
-
Investigation of Bragg Gratings in Few-Mode Fibers with a Femtosecond Laser Point-by-Point Technique
… design, fabrication, and characterization of off-axis Bragg gratings in a step-index two-mode fiber (TMF). Through measuring the transmission and reflection spectra along with the associated reflected mode intensity profiles under different input polarization, we experimentally investigate the …
-
Experimental Studies of Squat Gravity Caissons and Monopiles for Offshore Applications
… proposes a new methodology for the use of single-axis low g, high accuracy, MEMS accelerometers to measure orientation of on object in a geotechnical centrifuge. The inclusion of the measured component of cross-axis in orientation calculations significantly improves measurements of absolute …
-
Laser Forming of Compliant Mechanisms and Flat-Foldable Furniture
… mechanisms: a parallel-guided mechanism, a cross-axis flexural pivot, a LET joint array, a split-tube flexure, and a bi-stable switch. These mechanisms are shown to perform repeatable behavior and motion comparable to existing non-laser-formed versions. The further possibilities for …
Page 1 of 2