Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"Cross frames"”.
-
A study of stiffness of steel bridge cross frames
Cross frames are critical components in steel bridge systems. Cross frames brace girders against lateral torsional buckling and assist in distributing live loads to girders during the service life of the bridge. In curved bridges, cross frames also serve as primary structural members in resisting …
-
Stiffness and fatigue behavior of cross frames for steel bridge applications
Cross frames are critical for the stability of straight and curved steel bridges. Conventional cross frames are often fabricated from steel angles which are welded to gusset plates through one leg only. Due to this eccentric connection, these angles have substantial bending at the connection that …
-
Evaluation of fatigue design load models for cross-frames in steel I-girder bridges
… of advances in the level of understanding of cross-frame systems for steel I-girder bridges; however, very little work has focused on the proper loading conditions to produce an adequate estimate of the fatigue load in cross-frames. The goal of this research is to provide an improved …
-
Experimental and analytical evaluation of cross-frame fatigue behavior in steel I-girder bridges
Cross-frames are important structural components that serve many functions throughout the service life of steel I-girder bridge systems. They primarily act as stability braces to enhance the lateral-torsional buckling resistance of the girders during erection and deck construction, but also …
-
Brace Effectiveness of Cross-frame Layout and Connection Design on Skewed Steel Bridges During Construction
… (KDOT)'s current design practice is to align cross-frames parallel to the skew angle to avoid problems associated with fit-up during erection. The American Association of State Highway and Transportation Officials (AASHTO) provisions for bridges with skew angle greater than 20 degrees are …
-
Cross-frame stiffness modification factors for composite steel I-girder bridges
… I-girder bridges, the approach used to model cross-frames can significantly impact performance predictions for girder stability during construction and for cross-frame fatigue under in-service traffic loading. A common practice is to model cross-frame members as truss members subject to axial …
-
Stability of skewed I-shaped girder bridges using bent plate connections
Lateral bracing systems consisting of cross frames and their connections play a significant role in the elastic buckling strength of steel girder bridges. By providing lateral and torsional stability, they prevent lateral torsional buckling of the girder during bridge construction prior to the …
-
Skewed Cross Frame Connection Stiffness
Cross frames and diaphragms are essential to the stability of straight steel girder bridge systems as they help to resist lateral torsional buckling during construction and horizontal loading conditions. In skewed bridge systems, cross frames are often oriented parallel to the supports and hence, …
-
Instrumentation and live load testing of I-girder bridges for cross-frame fatigue analysis
… is part of a larger study on the behavior of cross-frames in steel bridge systems. The study is funded by the National Cooperative Highway Research Program (NCHRP 12-113). The fundamental goals of the research investigation are to produce methodologies and design guidelines for the following: …
-
Impact of lean-on bracing layouts on system stiffness behavior
… of intermediate bracing, typically that of cross-frames with single-angle members, to prevent lateral torsional buckling. These stability braces are often a cause of concern in skewed bridge systems due to the increased difficulty of installation and long-term maintenance issues caused by …
-
Effective Cross-Frame Framing Arrangements and Simplified Design for Straight Skewed and Nonskewed Steel I-Girder Bridges
… displacements occur because intermediate cross frames connect to the girders at different locations along the girder lengths due to the skew. The cross frames twist the girders because of their high in-plane stiffness, imparting approximately equal twist rotations at the …
-
Cross-frame forces in a straight bridge with normal supports
Cross-frame and diaphragm systems are important structural elements in steel I-girder bridges. These members enhance the lateral-torsional buckling resistance in straight girder systems by reducing the unbraced length. The critical stage for the braces from a stability perspective often occurs …
-
Evaluation of deck casting on the construction performance of straight and skewed steel I-girder bridges
… loading and detailing issues with girders and cross-frames. In particular, skew can result in increased warping, which produces a stress phenomenon known as lateral flange bending.;Lateral flange bending (LFB) is the torsional effect in flanges of an I-section that results from warping. Since …
-
Engineering Methodology For Considering Permanent Metal Deck Forms For Stability Of Bridges During Construction
… weak torsion resistance, designers provide cross-frames and/or diaphragms at close spacing intervals to minimize the susceptibility of individual girders to instability during construction. A recent increase in fatigue problems around discrete brace connections, along with the costs of …
-
Seismic Performance of Curved Steel Plate Girder Bridges with Seismic Isolation
… of local components such as bearings and cross-frames. The response of the plate-and-beam model was comparable to the 3D finite element model. This model may be used to design local components such as bearings and cross-frames.In addition, 3D finite element models of the curved steel plate …
-
The fatigue performance of cross frame connections
A new method of connecting cross-frames to bridge girders had been proposed to alleviate concerns with current design practices. This new, half-pipe detail needs to be examined for fatigue issues that may exist which would make it infeasible as a replacement candidate for the current bent-plate …
-
Applications of partial depth precast concrete deck panels on horizontally curved bridges
… construction. These bracing systems included cross frames and lateral trusses for I-girder systems and top lateral trusses and internal and external cross frames for steel tub girders. While partial depth precast concrete panels (PCPs) are commonly used as stay-in-place formwork for straight …
-
Measured stress ranges and cross frame analysis of the Holston River Bridge, (June 1993 to November 1993)
… stiffeners were installed between the cross-frames. After the repairs on the bridge, a research program was conducted by the University of Tennessee Civil Engineering Department to obtain the following information: a) determine the effectiveness of the repairs on the bridge, b) to …
-
Finite Element Study on Bridge Details Susceptible to Distortion-Induced Fatigue
… of adjacent girders. The effects from cross frames attached to girders subjected to these differential deflections are the cause of out-of-plane deformations or distortions, which are the driving force for fatigue cracks in the web-gap region. A few retrofits exist that focus on …
-
In-plane shear strength and stiffness of precast concrete panels
… potentially leading a reduction in the number of cross-frames and top lateral truss member sizes. The objective of this research is to measure the in-plane shear strength and stiffness of PCP attached to girder systems using different connections and to determine the stability of the traditional …
Page 1 of 2