Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Cross-hatch"”.

  1. Monolithically integrated 940 nm AlₓGa1-ₓAs distributed Bragg reflectors on bulk Si and Ge substrates

    … a relatively high density of surface bumps and a cross-hatch pattern. Moreover, the GaAsP/Si DBRs have irregular double-peak-shaped reflectance stopbands. The ART-Ge/Si DBRs have the worst surface quality, making them unsuitable for further VCSEL development. A surface scratch test was proposed …

    ubc Repository record for Monolithically integrated 940 nm AlₓGa1-ₓAs distributed Bragg reflectors on bulk Si and Ge substrates (opens in a new tab) Download PDF for Monolithically integrated 940 nm AlₓGa1-ₓAs distributed Bragg reflectors on bulk Si and Ge substrates (opens in a new tab)

  2. Reaction Paths for Self-Organized Surface Roughening of Silicon-Germanium Alloys During Hydride Gas-Source Molecular Beam Epitaxy

    … ≃ 100 nm) to probe the effect of thetaH on cross-hatch formation. At t slightly larger than tc, surface roughness is dominated by single- and multiple-atomic-height steps associated with the interfacial misfits. The surface steps are preferential H desorption sites, thus the increased total …

    uiuc Repository record for Reaction Paths for Self-Organized Surface Roughening of Silicon-Germanium Alloys During Hydride Gas-Source Molecular Beam Epitaxy (opens in a new tab)

  3. An investigation of cracking in laser metal deposited nickel superalloy CM247LC

    … produced various microstructures, with the cross hatch toolpath producing the lowest cracking response due to the generation of competing stress fields that reduce the net tensile stress available to form cracks. Powder particle size range was also observed to influence the crack density, …

    birmingham Download PDF for An investigation of cracking in laser metal deposited nickel superalloy CM247LC (opens in a new tab)

  4. Microstructural formations and phase transformation pathways in tantalum carbides

    … the grains were equiaxed, equiaxed with a cross-hatch pattern of thin laths of secondary phases, to acicular grains. The microstructures were quantified through a series of different 2D and 3D analytical techniques. To understand how these microstructures developed, a series of XTa:(1-X)C …

    alabama Repository record for Microstructural formations and phase transformation pathways in tantalum carbides (opens in a new tab)

  5. MBE growth of InxGa1-xAs/GaAs/Si heterostructure system

    … for the large lattice mismatched system. From cross-hatch,we also obtained the linear dislocation densities along two <110> directions, 200cm^{-1} and 1200cm^{-1} respectively. In addition, the SEM topographies of the epitaxial growth of In_{0.5}Ga_{0.5}As on tilted and untilted Si substrates …

    njit Repository record for MBE growth of InxGa1-xAs/GaAs/Si heterostructure system (opens in a new tab)

  6. Analysis of Printed Electronic Adhesion, Electrical, Mechanical, and Thermal Performance for Resilient Hybrid Electronics

    … The semi-quantitative method evolved from manual cross-hatch scratch testing by designing, printing, and testing a semi-automated tool, which was coined scratch adhesion tester (SAT). By cross-hatch scratch testing with a semi-automated device, the SAT bypasses the operator-to-operator variance …

    usf Repository record for Analysis of Printed Electronic Adhesion, Electrical, Mechanical, and Thermal Performance for Resilient Hybrid Electronics (opens in a new tab)

  7. Automated roundabout safety analysis : diagnosis and remedy of safety problems

    … proposed to address these concerns are to add cross hatch markings, narrow down circulating lanes, modify central island markings, provide pedestrian crossing signs, and propose further education for drivers on using roundabouts and accommodating vulnerable road users. This thesis helps to …

    ubc Repository record for Automated roundabout safety analysis : diagnosis and remedy of safety problems (opens in a new tab) Download PDF for Automated roundabout safety analysis : diagnosis and remedy of safety problems (opens in a new tab)

  8. Synthesis and analysis of Superhydrophobic-based corrosion protection systems for aluminum alloys and their evaluations on friction stir spot-welded metals

    … of the coating to the substrate was verified by cross-hatch tape testing according to ASTM D3359, which showed less than 5% loss of material. Durability of the coating was tested by exposure to a base solution with a Ph of 9, a 0.5M H2SO4 acid solution, and an acetone solvent. Only the base …

    wichita-thes Repository record for Synthesis and analysis of Superhydrophobic-based corrosion protection systems for aluminum alloys and their evaluations on friction stir spot-welded metals (opens in a new tab)

  9. Characterisation of GaAsBi based semiconductors

    … higher strain relaxation, which was confirmed by cross-hatch patterns observed by Nomarski microscopy and X-ray diffraction. The bismuth content of each wafer obtained from valence band anti-crossing model and XRD simulations match well. Current-voltage measurements show good diode behaviour with …

    whiterose Download PDF for Characterisation of GaAsBi based semiconductors (opens in a new tab)

  10. Different Approaches to Improve Metamorphic Buffer Layers Grown on a GaAs Substrate

    … surface defects. Surface undulations, known as “cross-hatch” (CH), were observed in the top MB layers. Atomic force microscopy (AFM) was used to analyze the surface morphology and degree of polarization (DOP) measurement was used to analyze the strain features in the final MB layer. Similar …

    mcmaster Repository record for Different Approaches to Improve Metamorphic Buffer Layers Grown on a GaAs Substrate (opens in a new tab)

  11. Optimization of Binder Content in Paints to Partially Substitute Acrylate Content – Investigation of Binder Properties Through a Functional and Environmental Perspective

    … of viscosity, solid content, color and gloss, cross hatch testing, stability tests, texture of paint coating, weathering test and accelerated weathering test. The environmental impact of the binders was limited to the manufacture and transportation of the binder i.e. step A1 and A2 in a Life …

    chalmers Repository record for Optimization of Binder Content in Paints to Partially Substitute Acrylate Content – Investigation of Binder Properties Through a Functional and Environmental Perspective (opens in a new tab)

  12. Diamond-like Carbon Coatings for Improved Mechanical Performance of Polymer Materials

    … material for light-weighting components across many industries. As the most efficient use of oil, they allow complex geometries to be manufactured, with lower weight than metallic or alloy counterparts, whilst remaining low cost. As the use of polymers continues to increase, so does the …

    whiterose Download PDF for Diamond-like Carbon Coatings for Improved Mechanical Performance of Polymer Materials (opens in a new tab)

  13. Chemical-Free Metal-PDMS Thermal Bonding in Flexible Electrode Fabrication

    … CFMPTB were compared by two adhesion tests; the cross-hatch adhesion test, and the adhesion ratio test. This proved that no strong adhesion was generated by the standard PDMS curing condition but CFMPTB had significantly enhanced the adhesion between metal and PDMS. As a result, CFTMPB can …

    buffalo Repository record for Chemical-Free Metal-PDMS Thermal Bonding in Flexible Electrode Fabrication (opens in a new tab)

  14. Real-Time Hatch Rendering

    University of Washington Abstract Real-Time Hatch Rendering Luyao Wang Chair of the Supervisory Committee:Dr. Kelvin Sung Computer Science and Software Engineering Hatching has been a common and popular artistic drawing style for centuries. In computer graphics rendering, hatching has been …

    washington Repository record for Real-Time Hatch Rendering (opens in a new tab)

  15. Initiation and development of sand dunes in river channels

    … initiation begins with the imprinting of a cross-hatch pattern on the flat sediment bed under general sediment transport which leads to chevron shaped forms that migrate independently of the initial structure. The chevron shapes are organised by a simple fluid instability that occurs at the …

    ubc Repository record for Initiation and development of sand dunes in river channels (opens in a new tab) Download PDF for Initiation and development of sand dunes in river channels (opens in a new tab)

  16. Scaling up production of reprogrammed cells for biomedical applications

    … extruded into disc-shaped moulds or printed in a cross-hatch infill pattern and cross-linked with calcium ions. In both discs and printed patterns, hiPSCs recovered from these bioprints showed viability of around 70% even after 4 days of culture when loaded into gelatin-alginate solution in …

    wurz-thes Repository record for Scaling up production of reprogrammed cells for biomedical applications (opens in a new tab)

  17. Návrh povrchové úpravy mokrým lakováním

    Diplomová práce shrnuje teoretické i praktické zkušenosti s povrchovou úpravou mokrým lakováním, kterou diplomantka nabyla jak po dobu studia tak v rámci praxe, kterou absolvovala na lakovně kabin stavebních, manipulačních a zemědělských strojů. V rámci této práce došla diplomantka k závěru, že z …

    brno-tech Repository record for Návrh povrchové úpravy mokrým lakováním (opens in a new tab)