Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 274 for “"Cross-laminated Timber"”.
-
Acoustics of Cross-Laminated Timber Structures
… investigates the vibroacoustic behaviour of cross-laminated timber (CLT) structures predicted using the wave and finite element (WFE) method. Experimental results are then presented to validate this approach. Previously, CLT has been modelled as an equivalent orthotropic plate. This approach …
-
Half-Lap Cross Laminated Timber Pegged Joints
Cross laminated timber (CLT) is a panelized structural system consisting of odd layers of dimension sawn lumber stacked perpendicularly to the previous layer. Since the introduction of CLT to North America, man research projects have been conducted on the material properties of CLT panels as well …
-
In-plane stiffness of cross-laminated timber floors
This study investigates the in-plane stiffness of CLT floor diaphragms and addresses the lateral load distribution within buildings containing CLT floors. In practice, it is common to assume the floor diaphragm as either flexible or rigid, and distribute the lateral load according to simple hand …
-
Numerical analysis of self-centring cross-laminated timber walls
Self-centring Cross-Laminated Timber (CLT) walls are a low damage seismic force resisting system, which can be used to construct tall wood buildings. This study examines two approaches to model self-centring CLT walls, one that uses lumped plasticity elements, and another that uses fibre-based …
-
Behaviour of Cross-Laminated Timber Subjected to Blast Loading
Heavy timber construction is emerging as a viable alternative to conventional building materials, such as steel and concrete, for mid- and high rise structures. With the increasing presence of timber structures at or near potential targets comes an increased risk for damage to the structure and …
-
Contribution of cross laminated timber panels to room fires
… Laboratory to assess the contribution of Cross Laminated Timber (CLT) panels to the development, duration and intensity of room fires. The tests were conducted in rooms constructed from 105 mm thick 3-Ply CLT panels and measured 3.5m wide by 4.5 m long by 2.5 m high. Propane and furniture …
-
Fire Resistance of Partially Protected Cross-Laminated Timber Rooms
This thesis studies the fire behaviour of Cross Laminated Timber (CLT) panels in partially protected rooms. A one-dimensional heat transfer model was developed to determine the fire resistance of CLT floor and wall panels. During this study, three room fire tests were conducted at Carleton …
-
Acoustic performance of junctions in cross laminated timber constructions
With the emergence of cross laminated timber (CLT) as a structural material on the global market, the need to understand the acoustical behavior of buildings con- structed with the material grows. CLT faces a set of challenges that concrete or masonry do not; being low density, high in stiffness, …
-
Assessment of Cross Laminated Timber Markets for Hardwood Lumber
The goal of this study was to assess the potential of using hardwood lumber in CLT manufacturing. The goal was achieved by addressing four specific objectives. The first objective was to collect CLT manufacturers' perspectives for using hardwood lumber in the current manufacturing setup. The second …
-
Experimental Investigation of Controlled Rocking Cross-Laminated Timber Walls
Controlled rocking timber walls are being developed to resist earthquake loads without major structural damage. These systems respond to seismic loading through partial uplift from the foundation, dissipating energy through rocking impact and supplemental energy dissipation elements. Initial …
-
Failure mechanism of rolling shear failure in cross-laminated timber
… carbon footprint and fast construction period. Cross-laminated timber (CLT), as one of the new engineered wood products, requires more research emphasis since its mechanical performance can allow CLT to be utilized in massive timber structures. This thesis focuses on revealing one of the key …
-
Development of cross laminated timber composite panels from C16 timber
… study involved the manufacturing of a variety of cross laminated timber panels with varying dimensions and a selection of reinforcement techniques. It was necessary to develop a drying regime for rapid growing Sitka Spruce harvested in Ireland bringing it to a moisture content of 12%, not normally …
-
Potential of cross laminated timber in single family residential construction
Cross laminated timber (CLT) is a panelized engineered wood product that is gaining popularity in the United States as a structural material for massive timber buildings. CLT is shown to be cost competitive to steel and concrete in large building construction projects, but is seen as uncompetitive …
-
Kinematic Behaviour of Cross Laminated Timber (CLT) Shearwalls with Openings
An integrated experimental and numerical research program investigating the elastic and inelastic performance as well as the kinematic behaviour of shearwalls with openings is presented in this study. The influence of the geometrical dimensions of the wall configurations and the mechanical …
-
Evaluating the Ballistic Performance of Steel Enhanced Cross-Laminated Timber
… of State have recently gained interest in cross-laminated timber (CLT) for its ballistic resistance. While CLT performs better than typical dimensional lumber, the thickness needed to protect against high threats can diminish its appeal. Enhanced CLT (ECLT) is a composite system of CLT and …
-
Large-Scale Dynamic Testing of Rocking Cross Laminated Timber Walls
… development of engineered wood products such as cross laminated timber (CLT), tall mass timber buildings are becoming a feasible and attractive alternative to using nonrenewable materials such as concrete and steel. Using CLT panels in a post-tensioned rocking wall system shows great potential …
-
Seismic Design and Testing of Rocking Cross Laminated Timber Walls
Mass timber is an attractive alternative to nonrenewable materials such as concrete and steel. High rise timber buildings have not been built in high seismic areas due to lack of ductile lateral force resisting systems that can have large seismic force reduction factors. Seismically resilient, …
Page 1 of 14