Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"Crosspoint"”.

  1. A POWER ANALYSIS OF THE COMBINED INPUT AND CROSSPOINT QUEUED SWITCH

    … switch design is to insert a FIFO queue in each crosspoint of an IQ switch. This architecture is named the Combined Input and Crosspoint Queued switch, denoted as CIXQ. The use of crosspoint queues simplifies the scheduling of traffic through the switch, at the cost of adding N2 FIFO queues to …

    mcmaster Repository record for A POWER ANALYSIS OF THE COMBINED INPUT AND CROSSPOINT QUEUED SWITCH (opens in a new tab)

  2. Design of a digital crossbar/crosspoint switch for TMS320C40 Digital Signal Processors

    <p>The design of an eight-port digital crossbar/crosspoint switch is presented. An <i>N-port crossbar switch,/i> is an interconnection device in a multiprocessor system which allows connection between pairs of data ports of different processors. There are a total of N/2 connections possible at a …

    ut-knoxville Repository record for Design of a digital crossbar/crosspoint switch for TMS320C40 Digital Signal Processors (opens in a new tab)

  3. Fabrication of micron-sized mirror/cantilever silicon devices for crosspoint switching arrays

    This thesis describes the fabrication of micron-sized vertical mirrors at the end of horizontal cantilevers, that are electrostatically controlled. The mirrors, 40x 40 um with thicknesses of 1.5-6 um, were made by using the etch resistance to 40% KOH etchant of <111> planes and oxide stripes. The …

    njit Repository record for Fabrication of micron-sized mirror/cantilever silicon devices for crosspoint switching arrays (opens in a new tab)

  4. 1D-CROSSPOINT ARRAY AND ITS CONSTRUCTION, APPLICATION TO BIG DATA PROBLEMS, AND HIGHER DIMENSION VARIANTS

    … introduces a new architecture that uses simple crosspoint switches to pair PEs instead of a complex interconnection network. This new architecture may be viewed as a “quadratic” array of processors as it uses O(n^2) PEs rather than O(n) as in linear array processor models. In addition, three …

    maryland Repository record for 1D-CROSSPOINT ARRAY AND ITS CONSTRUCTION, APPLICATION TO BIG DATA PROBLEMS, AND HIGHER DIMENSION VARIANTS (opens in a new tab)

  5. Design of an 8 x 8 non-blocking crosspoint switch in GaAs two-phase dynamic FET logic

    … simulation and layout of an 8 x 8 non-blocking crosspoint switch implemented in GaAs two-phase dynamic FET logic (TDFL) is presented in this thesis. The design of the TDFL crosspoint switch given here is a modification of a crosspoint switch design that uses GaAs direct-coupled FET logic (DCFL). …

    nps Repository record for Design of an 8 x 8 non-blocking crosspoint switch in GaAs two-phase dynamic FET logic (opens in a new tab)

  6. Architecture design and performance analysis of practical buffered-crossbar packet switches

    Combined input crosspoint buffered (CICB) packet switches were introduced to relax inputoutput arbitration timing and provide high throughput under admissible traffic. However, the amount of memory required in the crossbar of an N x N switch is N^2x k x L, where k is the crosspoint buffer size and …

    njit Repository record for Architecture design and performance analysis of practical buffered-crossbar packet switches (opens in a new tab)

  7. A new fault model and its application in synthesizing Toffoli networks

    … We consider a new fault model, namely the crosspoint fault, for reversible circuits. The effects of this kind of fault on the behaviour of the circuits are studied. A randomized test pattern generation algorithm targeting this kind of fault is introduced and analyzed. The relationship …

    uvic Repository record for A new fault model and its application in synthesizing Toffoli networks (opens in a new tab)

  8. Developing and Implementing a Pastoral Leadership Course at Crosspoint Church in Clemson, South Carolina, for Present and Future Elder Candidates

    … and implement a pastoral leadership course at Crosspoint Church in Clemson, South Carolina, for present and future elder candidates. Chapter 1 explains the ministerial context of Crosspoint Church and demonstrates the need for the development of a pastoral leadership course for training and …

    sbts Repository record for Developing and Implementing a Pastoral Leadership Course at Crosspoint Church in Clemson, South Carolina, for Present and Future Elder Candidates (opens in a new tab)

  9. Design and stability analysis of high performance packet switches

    … throughput and high speed rates. Combined input-crosspoint buffered (CICB) switches are an alternative to input-buffered (IB) packet switches to provide high-performance switching and to relax arbitration timing for packet switches with high-speed ports. A maximum weight matching (MWM) scheme can …

    njit Repository record for Design and stability analysis of high performance packet switches (opens in a new tab)

  10. Monolithically Integrated SRAM-ReRAM Cache-Main Memory System

    … opportunity in that it can be fabricated in crosspoint subarrays which leave the bulk of transistors beneath them available for other logic. However, ReRAM also poses a performance challenge; the latency is generally much higher than that of DRAM. Compensating for this through the increased …

    maryland Repository record for Monolithically Integrated SRAM-ReRAM Cache-Main Memory System (opens in a new tab)

  11. Plasma enhanced chemical vapour deposited silicon carbide for back-end-of-line resistive memory

    … high performance memory is fabricated in a Crosspoint array. In this work I have investigated the fabrication process flow for Crosspoint structures for the optimum device characteristics. I have also fabricated the first recorded SiC-based Crosspoint structure. By embedding cells using …

    soton Download PDF for Plasma enhanced chemical vapour deposited silicon carbide for back-end-of-line resistive memory (opens in a new tab)

  12. Optimal algorithmic testing of re-programmable logic arrays

    … tested since their circuits utilized fuse link crosspoints and were not dynamically reprogrammable. Such devices could be tested by a unique personality pattern that combined the application and the test circuit. The new PLA/PLD architecture requires testing of arbitrary personality patterns. …

    njit Repository record for Optimal algorithmic testing of re-programmable logic arrays (opens in a new tab)

  13. Latency Tradeoffs in Distributed Storage Access

    … emerging storage technologies such as Flash, 3D-crosspoint, phase change memory (PCM), etc. coupled with highly efficient access protocols such as NVMe are capable of ingesting and reading data at rates that challenge even the leading edge networking technologies such as 100Gb/sec Ethernet. At …

    temple Repository record for Latency Tradeoffs in Distributed Storage Access (opens in a new tab)

  14. Quantum well intermixing in 1.55 um InGaAs/AlInGaAs and InGaAs/InGaAsP structures and applications

    … of potential application in WDM systems and 2x2 crosspoint optical integrated switches. The expected performance has been achieved. A reactive ion etching process, using CH4/H2 etching gas, has been investigated, particularly for effective etching in the InGaAs/AlInGaAs MQW system. A 'standard' …

    glasgow Download PDF for Quantum well intermixing in 1.55 um InGaAs/AlInGaAs and InGaAs/InGaAsP structures and applications (opens in a new tab)

  15. Defect and fault tolerance techniques for nano-electronics

    … diagnosis to the nanowire level rather than the crosspoint level as in previously proposed graph-based techniques.<br/><br/>The final contribution involves improving both manufacturing yield and computational reliability of nanoscale crossbars implementing logic circuits as LUTs. This is achieved …

    soton Download PDF for Defect and fault tolerance techniques for nano-electronics (opens in a new tab)

  16. A system for constructing configurable high-level protocols

    … mobile architectures such as those found in the Crosspoint, PARC TAB, InfoPad, or DataMan projects.

    arizona-thes Repository record for A system for constructing configurable high-level protocols (opens in a new tab)

  17. Analysis of novel high-performance switch architectures for broadband-ISDN.

    … to store a single packet is provided at each crosspoint of this switch. In addition to this, buffers are provided at the input ports to reduce the packet loss. We propose a new scheduling policy called head-of-line priority selection, which reduces the head-of-line blocking and thus improves …

    ottawa-retro Repository record for Analysis of novel high-performance switch architectures for broadband-ISDN. (opens in a new tab)

  18. Load balancing and scalable clos-network packet switches

    … output queues at ceNtral stagE (VINE) and crosspoint-buffers at output modules and its configuration scheme are introduced. VINE uses space switching in the first stage and buffered crossbars in the second and third stages. The proposed configuration scheme uses pre-determined and periodic …

    njit Repository record for Load balancing and scalable clos-network packet switches (opens in a new tab)

Page 1 of 2