Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 499 for “"Cu(In"”.
-
Photolumineszenz epitaktischer Cu(In,Ga)Se2-Schichten
In dieser Arbeit werden Photolumineszenz untersuchungen an epitaktischen Cu(In,Ga)Se2-Schichten vorgestellt. Die Untersuchung ist durch folgende Beobachtung motiviert: CuGaSe2 basierte Solarzellen ereichen noch nicht mal einen Wirkungsgrad von 10%, während die Effizienz von ähnlichen Solarzellen …
-
The direct examination of biologically active Cu in seawater
… differentiation of biologically active copper (Cu) in seawater was developed. The procedure involves passing a seawater sample through an ion exchange resin of the sulponate type until complete breakthrough of metal ion is achieved. The sorbed Cu is then eluted and its total concentration is …
-
Spectral response of Cu(In,Ga)Se₂ solar cells
Includes bibliographical references (pages 77-80).
-
Cu(In, Ga)Se₂ absorbers fabricated from sputtered precursors
Includes bibliographical references (pages 115-120).
-
Degradation of Flexible Cu(In,Ga)Se2 Solar Cells
… flexibler Dünnschichtsolarzellen auf Basis von Cu(In,Ga)Se2 Absorbern. Zur beschleunigten Alterung unter Laborbedingungen wurden unverkapselte Solarzellen in Klimaschränken Wärme und Feuchte ausgesetzt. Die Auswirkungen von Wärme und Feuchte auf die Solarzellen wurden zunächst durch Messung von …
-
In situ investigation of the rapid thermal reaction of Cu-In-Ga precursors to Cu(In,Ga)Se2 thin-film solar cell absorbers
Cu(In,Ga)Se2 (CIGS) is applied as absorber layer for thin film solar cells. An industrially relevant approach for low cost and fast preparation of CIGS is the sequential processing. The sequential process applied in this work is based on sputtering a Cu-In-Ga precursor, which is then heated in Se …
-
Sintering of Cu(In,Ga)Se2 nanocrystal films for photovoltaics
Low cost solar cells are needed to increase availability and reliability of electricity throughout the world. Spray deposition of Cu(In,Ga)Se₂ (CIGS) nanocrystal inks is a promising route to low cost photovoltaics(PVs). CIGS nanocrystal inks have been used to fabricate solar cells with 3.1% power …
-
Rastertunnelspektroskopie an polykristallinen Cu(In,Ga)(S,Se)2-Dünnschichtsolarzellen
[...] Bei dem hier untersuchten multinären System CIGSe stellt sich ob seiner polykristallinen Struktur zudem die Frage nach der lateralen Homogenität der elektrischen Eigenschaften. Mit der verwendeten Meßmethode, einer photounterstützten Rastertunnelspektroskopie, können Inhomogenitäten in der …
-
Diffusion-Induced Grain Boundary Migration (DIGM) in Cu-In Alloy
Diffusion-induced grain boundary migration (DIGM) has been studied in pure Cu and a Cu-l0at%In alloy during alloying between 693 and 773 K (420 and 500 C) and during de-alloying between 783 and 823 K (510 and 550 C), respectively. Although the partial pressures of In above Cu-In alloys at the …
-
Thin-film polycrystalline Cu-In-Ga-Se for photovoltaic applications
Includes bibliographical references (pages 87-93).
-
Novel printable photovoltaic systems based on Cu(In,Ga)Se2 chalcopyrite
Nas últimas décadas temos assistido a uma intensa procura de fontes de energia eficientes, limpas e renováveis para responder ao crescente consumo energético e aos objetivos de descarbonização. No âmbito da energia solar, as células solares de filme fino inorgânico com base em CuInxGa1−xSe2 …
-
Optimization of Top Contact for Cu(In,Ga)Se2 Solar Cells
As world energy demands continue to increase, the need to generate electricity from a broader variety of sources, including renewables, is more critical than ever. With costs still 30% higher than those of natural gas, solar energy is a viable contender, but more progress is needed to level the …
-
Device physics of Cu(In,Ga)Se2 thin-film solar cells
Thin-film solar cells have the potential to be an important contributor to the global energy demand by the mid-21st-century. Cu(In,Ga)Se2 (CIGS) solar cells, which have achieved laboratory efficiencies close to 20%, are highly attractive, because their band gap is near the optimal value, their …
-
Identifikation von Defekten und Metastabilitäten in Cu(In,Ga)Se_2-Dünnschichtsolarzellen
… Das übergeordnete Ziel, nämlich die Entwicklung eines physikalischen Verständnis des Rekombinationsverhaltens und der Funktionsweise von Cu(In,Ga)Se2-Dünnschichtsolarzellen (CIGS), gab den Anlass zur Untersuchung folgender zentraler Themengebiete: (1) Die Interpretation bisher kontrovers …
-
Metastability and Degradation in Cu(In,Ga)Se2 Thin-Film Solar Cells
Cu(In,Ga)(S,Se)2 or CIGS is a thin-film semiconductor that has shown a device efficiency of 23.35% and 24.2% for single-junction and perovskite/CIGS tandem solar cells, respectively. CIGS offers promising properties such as tunable bandgap and ease of processing making them great candidates for …
-
Perovskite-Cu(In, Ga)(S, Se)₂ tandem solar cells with solution-processed absorbers
The full abstract for this thesis is available in the body of the thesis, and will be available when the embargo expires.
Page 1 of 25