Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 333 for “"Curie temperature"”.
-
DEVELOPING HIGH CURIE TEMPERATURE PIEZOELECTRICS WITH MACHINE LEARNING
… desirable phenomenon to occur collapses at a temperature called the Curie temperature. This limits the use of the materials to applications below that Curie temperature. Some research has been performed using machine learning to develop these high Curie temperature materials, but no attempt …
-
High Curie Temperature Bismuth- and Indium- Substituted Lead Titanate
… and the corresponding raise in the Curie temperature were investigated using thermal analysis, X-ray diffraction and electron microscopy. Maximum tetragonal perovskite distortion (c/a = 1.082) was obtained for x=0.20, with a corresponding Curie temperature of 582C. Phase-pure …
-
Materials for low Curie temperature induction heating of tumors (hyperthermia)
… nickel plating for self-regulating low temperature induction heating of tumors (hyperthermia) was investigated. The desired magnetic properties for the material were: (1) a Curie temperature, T(C), in the range of about 52-62°C, (2) high induced power above T(C), and (3) an abrupt drop …
-
Experimental search for high Curie temperature piezoelectric ceramics with combinatorial approaches
<p>High temperature piezoelectric materials are needed for actuation and sensing applications in harsh environments such as engine health monitoring and space exploration. Ferroelectric ceramics are widely used in piezoelectric devices but their high temperature application is limited by the …
-
The Diffusion of Carbon in Nickel Above and Below The Curie Temperature
Made available in DSpace on 2014-12-10T17:57:42Z (GMT). No. of bitstreams: 1 6511769.pdf: 1277418 bytes, checksum: 698ebcbe5957f6668b147e5d3743c787 (MD5) Previous issue date: 1965
-
Simulation and Analysis of Co-Pt Based Granular Magnetic Recording Media Near the Curie Temperature
… Modelling the magnetization dynamics near the Curie temperature (Tc) is crucial when predicting the limits of HAMR or any technology that relies on fast, high temperature magnetization control. However, there are some differences in how magnetic grains behave under conditions important to HAMR, …
-
Magnetocaloric effect in Gd1-xCexNi (x = 0 - 0.6): a cost-effective approach to tuning Curie temperature from 70K to 30K
… the cost effectiveness of the adiabatic temperature change (ΔTad) increases as high as 20% for (Gd0.4Ce0.6)Ni while the magnetic entropy change (-ΔSm) shows minimal improvement in cost effectiveness, falling from 3.93J/kg*K in GdNi to 1.75J/kg*K in (Gd0.4Ce0.6)Ni at 1T applied field. This …
-
Phase transitions in thin iron-palladium films
… Undulating Interference Device) to measure the Curie temperature of thin films of Pd(1-x)Fe(x). The Curie temperatures of these films were found to be significantly less than bulk samples having the same iron concentration. The Curie temperature, furthermore, showed a systematic shift to higher …
-
Doping of ferroelectric solid solution of (Ba, Sr) TiO_ to increase the RC time constant
… It is observed that SrTiO3 increases the Curie constant of BaTiO3. Whereas the Curie temperature of the solid solutions linearly decreases with increasing amount of SrTiO3, an oscillatory behavior was observed for both the reciprocal of the permittivity at Curie temperature and the Curie …
-
Ultrasonic measurement of the linear and the nonlinear elastic properties of PZT ceramics
… behavior of PZT ceramics is observed from room temperature to temperatures above the Curie temperature. The nonlinearity parameter is measured in two different PZT ceramics and is compared and contrasted with velocity and attenuation of ultrasonic waves in the samples. There is a peak in the …
-
Optimisation of atomistic model parameters for Nd2Fe14B type rare earth ferromagnets
… speed up the parameterisation process. Several Curie Temperature Measurement Protocols were implemented and evaluated for their reliability and consistency in calculating Curie temperatures in rare earth alloys from VAMPIRE atomistic model simulation data. The atomistic spin exchange constants …
-
Experimental investigation of the Fe-rich regions in the Ce-Fe-{Ni, Si, Al}-B quaternary systems: High-throughput screening of magnetic phases
… and anisotropy field. But in the case of Curie temperature, Ni and Si additives increase the Curie temperature of Ce2Fe14B ternary compound while Al additive reduces its Curie temperature.
-
Investigating the Pyro-Optic Properties of Antimony Sulfo-Iodide (SbSI)
… over time as the SbSI film was subjected to temperature ranging of 9°C - 24°C at 1°C increment. From these absorbance spectra, transmittance spectra were then obtained. The transmittance is determined to be dependent on temperature which predicts that SbSI films can be used as an infrared …
-
Μαγνητοθερμιδικά υλικά για εφαρμογές ψύξης σε θερμοκρασία περιβάλλοντος
… of novel magnetocaloric materials for room temperature magnetic refrigeration. Series of compounds belonging to the wider materials' family of mixed valance manganites were prepared by solid state reaction. The compounds are described by the chemical formula (La1-yLny)1-xBaxMnO3±δ where Ln: …
-
Detection and measurement of phase transformation in steel using electromagnetic sensors
… currently used by the steel industry to monitor temperature, and hence infer microstructure, however, their performance is imperfect due to the harsh environment that exists within the run out table. Methods for measuring micro structure directly on a strip steel run-out table are the subject of …
-
Skyrmion-hosting B20-type MnSi films on Si substrates grown by flash lamp annealing
… The preparation process includes room temperature sputtering Mn films with different thicknesses and flash-lamp annealing with different energy density (annealing temperature). Systematic investigations on their structural, electrical, magnetic, and magneto-transport properties were …
-
Doping induced quantum phase transition in the itinerant ferromagnet scandium indium
… in an applied magnetic field H = 0.1 T for temperatures T = 1.85 K to 300 K. Linearity of Arrott plots in low-field region was significantly improved by implementing the non-mean-field Arrott-Noakes technique where plotting M 1/β vs. ( H/M ) 1/γ is used to determine both the Curie …
Page 1 of 17