Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"Curing Kinetics"”.

  1. Characterization of Curing Kinetics of an Anisotropic Conductive Adhesive using Rheology and Differential Scanning Calorimetry

    … was found to increase with increasing isothermal curing temperature, and this was reflected in the kinetic rate constant. Moreover, the rate constant determined by DSC was found to range from 2.6×10-3 - 5.2×10-3 whereas values of k from 4.6×10-3 - 9.6×10-3 when determined using rheology. …

    rit Repository record for Characterization of Curing Kinetics of an Anisotropic Conductive Adhesive using Rheology and Differential Scanning Calorimetry (opens in a new tab)

  2. Modifications of epoxy resins for improved mechanical and tribological performances and their effects on curing kinetics.

    … and tribological properties as well as curing kinetics different than the pure epoxy. The optimum silica content for improved mechanical and tribological properties (low friction coefficient and wear rate) was different for each type of silane coupling agent. An unequivocal correlation …

    unt Repository record for Modifications of epoxy resins for improved mechanical and tribological performances and their effects on curing kinetics. (opens in a new tab)

  3. Characterization of curing kinetics and polymerization shrinkage in ceramic-loaded photocurable resins for large area maskless photopolymerization (LAMP)

    … a ceramic particle loaded photocurable resin. Curing of the resin is completed rapidly with exposures lasting 20~160ms. Three-dimensional parts are built layer-by-layer by sequentially applying and selectively curing resin layers of 25-100 micron thickness. In LAMP, diacrylate-based ceramic …

    gatech Repository record for Characterization of curing kinetics and polymerization shrinkage in ceramic-loaded photocurable resins for large area maskless photopolymerization (LAMP) (opens in a new tab)

  4. Foaming Kinetics of Closed Cell Rigid Polyurethane Foam

    … the reaction to produce foaming, and the curing kinetics of rigid polyurethane foam are discussed. The chemical formulas of the liquid components are described, and the reaction required to produce foaming and cure of the polyurethane is stated. The foaming kinetics of the polyurethane …

    ndsu Repository record for Foaming Kinetics of Closed Cell Rigid Polyurethane Foam (opens in a new tab)

  5. Epoxy + Liquid Crystalline Epoxy Coreacted Networks

    … and subsequently cured with anhydride and amine curing agents. Curing kinetics were determined using differential scanning calorimetry (DSC). Parameters for autocatalytic curing kinetics of both pure monomers and blended systems were determined. The extent of cure for both monomers was monitored …

    unt Repository record for Epoxy + Liquid Crystalline Epoxy Coreacted Networks (opens in a new tab)

  6. Curing Nano-filled Thermosetting Resins with RF Fields for Advanced Manufacturing: Simulations and Experiments

    In this report, we study the reaction kinetics of bisphenol A diglycidyl ether (DGEBA) and a curing agent (Jeffamine T403) and demonstrate new techniques to print multi-layered structures using localized RF heating and curing. We first characterized isothermal curing of DGEBA resin using rheometry …

    tamu Repository record for Curing Nano-filled Thermosetting Resins with RF Fields for Advanced Manufacturing: Simulations and Experiments (opens in a new tab)

  7. Investigation of rapid freeze prototyping and investment casting with ice patterns

    … Success of this process depends significantly on curing kinetics of the slurries and the fracture toughness of mold materials. The curing kinetics of the slurries and mold material fracture toughness from different compositions are examined and the effects of various processing parameters on the …

    must-thes Repository record for Investigation of rapid freeze prototyping and investment casting with ice patterns (opens in a new tab)

  8. Cure Kinetics of Two Part Epoxy Resin and the Effect on Characterization of Thermal Barrier Coatings

    … the coating during grinding and polishing. The curing kinetics of a slow cure two part epoxy was investigated and the TBC samples were mounted and cured at heating rates of 2, 5, and 10°C/min to 55°C and 70°C. Grinding and polishing procedures simulated industry practices followed by …

    vt Repository record for Cure Kinetics of Two Part Epoxy Resin and the Effect on Characterization of Thermal Barrier Coatings (opens in a new tab)

  9. Rheological characteristics of solvent free nanofluids: Thermal transitions and reactive curing

    … rheological parameters, thermal transitions, and curing kinetics of various solvent-free nanofluids synthesized by Zhiming Qiu and Kejian Bian at the Coating Research Institute at Eastern Michigan University.

    emich Repository record for Rheological characteristics of solvent free nanofluids: Thermal transitions and reactive curing (opens in a new tab)

  10. Pericarpo de cupuaçu (Theobroma grandiflorum) como aditivo retardante da cura de poliéster

    … organic compounds that can affect the curing kinetics of polymer resins, with potential to be used as a cure accelerator or retardant. The objective of this research was to study the effect of the chemical compounds present in the cupuaçu fruit shell on the curing kinetics of polyester …

    brazil-ufrn Repository record for Pericarpo de cupuaçu (Theobroma grandiflorum) como aditivo retardante da cura de poliéster (opens in a new tab)

  11. Thermosetting polymer-matrix composites for structural repair applications

    … glass transition or drastically altering curing kinetics. Characterization of the composites included dynamic mechanical analysis, thermomechanical analysis, differential scanning calorimetry, thermogravimetric analysis, rheological and rheokinetic evaluation, and transmission electron …

    iastate Repository record for Thermosetting polymer-matrix composites for structural repair applications (opens in a new tab)

  12. Analysis of Pultrusion Processing for Long Fiber Reinforced Thermoplastic Composite System

    … various sources, such as heat conduction and the curing kinetics of the resin system. Analysis on the flow aspect of the process was almost absent in the literature for thermosetting process. With the increasing uses of thermoplastic materials, it is desirable to obtain the detailed velocity and …

    odu Repository record for Analysis of Pultrusion Processing for Long Fiber Reinforced Thermoplastic Composite System (opens in a new tab)

  13. Structure-Processing-Property Engineering of Polymeric Materials for 3D Printing and Carbon Capture

    … and solvent selectivity influence photocuring and mechanical behavior. The spatial distribution of reactive groups governed gelation, while solvent choice strongly affected both curing kinetics and final modulus. Sustainable polymer-ceramic composites were created by combining a …

    tamu Repository record for Structure-Processing-Property Engineering of Polymeric Materials for 3D Printing and Carbon Capture (opens in a new tab) Embargoed until 2027-12-01

  14. Structure-Processing-Property Engineering of Polymeric Materials for 3D Printing and Carbon Capture

    … and solvent selectivity influence photocuring and mechanical behavior. The spatial distribution of reactive groups governed gelation, while solvent choice strongly affected both curing kinetics and final modulus. Sustainable polymer-ceramic composites were created by combining a …

    tamu Repository record for Structure-Processing-Property Engineering of Polymeric Materials for 3D Printing and Carbon Capture (opens in a new tab) Embargoed until 2027-12-01

  15. Structure-Processing-Property Engineering of Polymeric Materials for 3D Printing and Carbon Capture

    … and solvent selectivity influence photocuring and mechanical behavior. The spatial distribution of reactive groups governed gelation, while solvent choice strongly affected both curing kinetics and final modulus. Sustainable polymer-ceramic composites were created by combining a …

    tamu Repository record for Structure-Processing-Property Engineering of Polymeric Materials for 3D Printing and Carbon Capture (opens in a new tab) Embargoed until 2027-12-01

  16. Structure-Processing-Property Engineering of Polymeric Materials for 3D Printing and Carbon Capture

    … and solvent selectivity influence photocuring and mechanical behavior. The spatial distribution of reactive groups governed gelation, while solvent choice strongly affected both curing kinetics and final modulus. Sustainable polymer-ceramic composites were created by combining a …

    tamu Repository record for Structure-Processing-Property Engineering of Polymeric Materials for 3D Printing and Carbon Capture (opens in a new tab) Embargoed until 2027-12-01

  17. Evaluating Epoxy Cure And Adhesion Strength Through Single-Sided Nmr Measurements Of Molecular Mobility

    … connections between materials. Determination of curing kinetics and properties of interfaces between epoxy and inorganic substrates provides insight that is useful for quality control and defect detection for such applications. Single-sided NMR provides a nondestructive and inexpensive method for …

    wm-mary Repository record for Evaluating Epoxy Cure And Adhesion Strength Through Single-Sided Nmr Measurements Of Molecular Mobility (opens in a new tab)

  18. Transition Metal Complexes As Latent Catalyst And Adhesion Promoter In Epoxy Resin

    … reliability. As a thermosetting polymer, epoxy curing control towards designed temperature response and thermal profile are desirable to fulfill the needs of specific applications such as no-flow underfill in advanced flip-chip packages. As such, controllable latent catalysts have been pursued …

    gatech Repository record for Transition Metal Complexes As Latent Catalyst And Adhesion Promoter In Epoxy Resin (opens in a new tab)

  19. Detecting and Repairing Conflicting Constraints in Co-Trained Physics-Informed Neural Networks for Composite Curing Processes

    … in the automotive and aerospace industries. The curing process for these composites has been modeled using a variety of partial differential equations representing the heat transfer and composite curing kinetics. Optimizing the applied temperature profile is critical for maximizing the efficiency …

    mtu Repository record for Detecting and Repairing Conflicting Constraints in Co-Trained Physics-Informed Neural Networks for Composite Curing Processes (opens in a new tab)

  20. Investigating the effects of processing parameters in Reactive Extrusion Additive Manufacturing

    … and extruded, rapidly initiating an exothermic curing reaction which crosslinks the polymer chains. The robotic REAM system utilized in this work couples this material extrusion system to a 6 degree-of-freedom robotic arm for actuation, and utilizes path-planning software which converts g-code …

    texas Repository record for Investigating the effects of processing parameters in Reactive Extrusion Additive Manufacturing (opens in a new tab)

Page 1 of 3