Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 153 for “"Curing Temperature"”.
-
Low Curing Temperature Ferromagnetic Ink Development and Application in 3D Printed RF Antenna Design and Miniaturization
In recent times, there has been an increasing demand for smaller size electronic and mobile devices because of advances in engineering and nanotechnology. This has pushed further the need for small size RF antenna with light weight and ease of fabrication especially in areas of communication, …
-
Fly ash based geopolymer: Water, curing temperature and, CaO content effects on microstructure and compressive strength.
… the effects of CaO content, water, and curing temperature on geopolymerization. Using fly ash from a local power plant in Kentucky and alkali solutions, various parameters are tested, focusing on formation, microstructure, and mechanical properties of geopolymers. Compressive strength, …
-
A study on the effect of casting and curing temperature on the mechanical properties of concrete.
… (not necessarily consecutive) at which the air temperature is above 10°C. However, construction of offshore Arctic structures will usually take place at temperatures close to that of the sea at approximately 0 to 4°C; and hence information on the influence of temperature during mixing, …
-
Effect of curing temperature on hydraulic backfill performance with consideration of a new type of binder
… mining operations. The high stresses and temperature associated with mining at depth in the Canadian Shield, also requires innovative approaches to mine backfilling to withstand the loading both during and after mining operations. Not only new or modified mine fill systems are required, …
-
Modeling the effects of sulphate and curing temperature on the strength of cemented paste backfill using artificial neural networks
The effects of sulphate and curing temperature play an important role on the strength development and durability of Cemented Paste Backfill (CPBs). Depending on the application of the CPB, different strength values, measured as unconfined compressive strength (UCS), are targeted. There is a lack of …
-
Influence of Curing Temperature on Strength of Cement-treated Soil and Investigation of Optimum Mix Design for the Wet Method of Deep Mixing
… a cement-water slurry. To study the influence of curing temperature on the strength of the treated soil, specimens were cured in temperature-controlled water baths for the desired curing time. After curing, unconfined compressive strength (UCS) tests were conducted on the specimens. To investigate …
-
Early Strength Development of Cement Mixed Singapore Marine Clay
… In this investigation, the effect of curing temperature on the early strength behaviour was studied. It was found that the relation between setting time and curing temperature is governed by the Arrhenius law. The effect of curing temperature on the long-term strength development was …
-
Liquid Crystal Materials And Tunable Devices For Optical Communications
… applications in fiber-optic communications. The curing temperature is found to have significant effects on the PSLC performance. The electro-optic properties of nematic polymer network liquid crystal (PNLC) at different curing temperatures are investigated experimentally. At high curing …
-
INFLUENCIA DE LA ETAPA DE CURADO A BAJA TEMPERATURA EN EL COMPORTAMIENTO A FRACTURA EN MODO II DE COMPOSITES VINILESTER-BPA Y SU DURABILIDAD EN CONDICIONES EXTREMAS DE TEMPERATURA
… is not feasible to supply sufficient energy for curing composite, which is another aspect not widely established by research publications concerning the influence on the mechanical properties achieved by the composite. The given thesis aims: to characterize the interlaminar mode II fracture …
-
Calcium Aluminates Synthesis, Characterization, and Hydration Behavior
… as a function of the glass content, the curing temperature, and the water-solid ratio was investigated. In order to keep them from influencing the results, the free-lime content and the surface area of all samples were kept constant, whenever possible. Samples were hydrated with a …
-
Micro/nano-structural evolution in blended cement paste due to progressive deionised water leaching
… factors, such as, water leaching, ageing and curing temperature, with the aid of the analytical techniques, i.e. thermal analysis, XRD, SEM, TEM and SS MAS NMR. The water leaching experiments are performed on the one year old WPC cement paste blended with 30% PFA, as well as 13 years old WPC …
-
An investigation of several variables in the strength of shell molds
… difference between the effects of different curing temperatures on the strength of shell molds, A curing temperature of 500°F is more desirable than one of 600°F.
-
The impact of high temperatures on suitability of NRVB cement in nuclear waste management
This thesis investigates the effect of elevated curing temperatures on Nirex Reference Vault Backfill (NRVB) cement, a candidate backfill material for use within the United Kingdom’s Geological Disposal Facility (GDF). NRVB provides a highly alkaline environment, decreases radionuclide solubility, …
-
Development of Ambient-Cured Low-Alkali High-Strength Geopolymers
… the need for high alkalinity activators or heat curing, provided the ratio of Class F fly ash (40-90 wt%), blast furnace slag (10-60 wt%), and low-alkalinity sodium silicate (Ms = 1.5, 1.7, 2.0) is appropriately balanced. These compositions were characterised in terms of the setting time and …
-
Applications of cellulose acetate phthalate aqueous dispersion (Aquacoat CPD) for enteric coatin
… based films and the influence of coating and curing conditions on the release of beads coated with this polymer. The investigation aimed to obtain a solution for the poor enteric performance of CAP aqueous-based films on coated beads. The influence of plasticization and curing conditions on …
-
Multifunctional coatings for plant-based textiles and other cellulosic substrates
… by optimizing the polycation adsorption, the curing temperature and surface roughness of the substrate. The adsorption and layer properties were studied by quartz crystal microbalance with dissipation and atomic force microscopy, the effect of curing temperature was evaluated by scanning …
-
Effect of Tricalcium Silicate Content on Expansion in Internal Sulfate Attack
… the cementitious parameters and placement temperature that impact internal sulfate attack in concrete. Concrete structures make up a large percentage of the infrastructure and multifamily housing. Durability is very important. Cements can be formulated to reduce the impact of external …
-
Influences of Curing Conditions and Organic Matter on Characteristics of Cement-treated Soil for the Wet Method of Deep Mixing
… in-situ soil and binder, mixing conditions, and curing conditions.The study presented herein aims to investigate the influences of curing time, curing temperature, mix design proportion, organic matter in the soil, and curing stress on the strength of cement-treated soil. Fabricated and natural …
-
Mechanical Performance Of Graphene Enhanced Nitrile Rubber
… of the effect of nanofiller concentration and curing temperature on the mechanical properties mentioned above. Lastly, Phase 3 explored the possibility of adding non-functionalized graphene nanoplatelets to reduce the cost of production as well as the coating thickness’ effect on the cutting …
Page 1 of 8