Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 91 for “"Curing agent"”.

  1. Utilization of Hemp Shives as an Internal Curing Agent in Cementitious Materials

    Internal curing (IC) can enhance concrete strength and durability. IC agents mitigate autogenous shrinkage and early-age cracking by providing additional moisture within the concrete. Additionally, internal curing enhances cement hydration, leading to improved strength and reduced permeability. In …

    texas-state Repository record for Utilization of Hemp Shives as an Internal Curing Agent in Cementitious Materials (opens in a new tab)

  2. Lightweight Aggregates as an Internal Curing Agent for Low-Cracking High-Performance Concrete

    … aggregates to supply a source of internal curing for Low Cracking, High Performance Concrete (LC-HPC) is evaluated. Prior research is used as a basis to estimate the amount of with lightweight aggregate replacement needed to optimize the amount of moisture available in the mix for internal …

    ku Repository record for Lightweight Aggregates as an Internal Curing Agent for Low-Cracking High-Performance Concrete (opens in a new tab)

  3. Thermodynamic and mechanical properties of EPON 862 with curing agent DETDA by molecular simulation

    … the properties of EPON 862 cross-linked with curing agent DETDA, a potentially useful epoxy resin for future applications of nanocomposites. The properties of interest were density (at nearambient pressure and temperature), glass transition temperature, bulk modulus, and shear modulus. The …

    tamu Repository record for Thermodynamic and mechanical properties of EPON 862 with curing agent DETDA by molecular simulation (opens in a new tab)

  4. Assessing Viscoelastic Properties of Polydimethylsiloxane (PDMS) Using Loading and Unloading of the Macroscopic Compression Test

    … can be varied with the elastomer base to the curing agent ratio, i.e. by changing the cross-linking density. PDMS samples with different crosslink density in terms of their elastic modulus were measured. In this project the PDMS samples with the base/curing agent ratio ranging from 5:1 to 20:1 …

    usf Repository record for Assessing Viscoelastic Properties of Polydimethylsiloxane (PDMS) Using Loading and Unloading of the Macroscopic Compression Test (opens in a new tab)

  5. Understanding the effect of adding nanoclays into epoxies

    … as different types of clay, different types of curing agent, and processing conditions (temperature, time, speed), on dispersion of the clay particles were evaluated using different means, such as field emission gun scanning electron microscopy (FEGSEM), X-ray diffraction (XRD), transmission …

    concordia Download PDF for Understanding the effect of adding nanoclays into epoxies (opens in a new tab)

  6. Numerical and experimental investigation of brain surrogates under shock wave loading for blast-induced traumatic injury research

    … PDMS samples fabricated using different base and curing agent ratios as a means of varying the stiffness were subjected to unconfined compression experiments. A ramp-hold displacement profile was used to simulate a stress relaxation experiment. The ramp phase was described by subjecting the PDMS …

    iastate Repository record for Numerical and experimental investigation of brain surrogates under shock wave loading for blast-induced traumatic injury research (opens in a new tab)

  7. Characterization of Cure Kinetics and Physical Properties of a High Performance, Glass Fiber-Reinforced Epoxy Prepreg and a Novel Fluorine-Modified, Amine-Cured Commercial Epoxy.

    Kinetic equation parameters for the curing reaction of a commercial glass fiber reinforced high performance epoxy prepreg composed of the tetrafunctional epoxy tetraglycidyl 4,4-diaminodiphenyl methane (TGDDM), the tetrafunctional amine curing agent 4,4'-diaminodiphenylsulfone (DDS) and an ionic …

    unt Repository record for Characterization of Cure Kinetics and Physical Properties of a High Performance, Glass Fiber-Reinforced Epoxy Prepreg and a Novel Fluorine-Modified, Amine-Cured Commercial Epoxy. (opens in a new tab)

  8. Failure Analysis of Polydimethysiloxane Films Using Density Driven Approach

    … tunable mechanical properties through base-to-curing-agent ratios are well established, the role of density variations in governing fatigue behavior remains less explored. In this study, PDMS specimens were prepared in two forms: (i) Spatially uniform density samples, having a constant …

    tamu Repository record for Failure Analysis of Polydimethysiloxane Films Using Density Driven Approach (opens in a new tab) Embargoed until 2027-12-01

  9. Failure Analysis of Polydimethysiloxane Films Using Density Driven Approach

    … tunable mechanical properties through base-to-curing-agent ratios are well established, the role of density variations in governing fatigue behavior remains less explored. In this study, PDMS specimens were prepared in two forms: (i) Spatially uniform density samples, having a constant …

    tamu Repository record for Failure Analysis of Polydimethysiloxane Films Using Density Driven Approach (opens in a new tab) Embargoed until 2027-12-01

  10. Failure Analysis of Polydimethysiloxane Films Using Density Driven Approach

    … tunable mechanical properties through base-to-curing-agent ratios are well established, the role of density variations in governing fatigue behavior remains less explored. In this study, PDMS specimens were prepared in two forms: (i) Spatially uniform density samples, having a constant …

    tamu Repository record for Failure Analysis of Polydimethysiloxane Films Using Density Driven Approach (opens in a new tab) Embargoed until 2027-12-01

  11. Failure Analysis of Polydimethysiloxane Films Using Density Driven Approach

    … tunable mechanical properties through base-to-curing-agent ratios are well established, the role of density variations in governing fatigue behavior remains less explored. In this study, PDMS specimens were prepared in two forms: (i) Spatially uniform density samples, having a constant …

    tamu Repository record for Failure Analysis of Polydimethysiloxane Films Using Density Driven Approach (opens in a new tab) Embargoed until 2027-12-01

  12. Investigation of Adhesive and Electrical Performance of Waterborne Epoxies for Interlayer Dielectric Material

    … was related to a threshold concentration of the curing agent in the impregnating latex resin formulation. Conditions favoring faster drying lead to the rapid formation of a coalesced skin layer of latex resin, thereby trapping the curing agent in the bulk and reducing the surface deposition of …

    vt Repository record for Investigation of Adhesive and Electrical Performance of Waterborne Epoxies for Interlayer Dielectric Material (opens in a new tab)

  13. DEVELOPMENT OF SUSTAINABLE CEMENTITIOUS COMPOSITES THROUGH WASTE VALORISATION AND CARBON CAPTURE

    … performance concrete (UHPC) as an internal curing agent, 2) low-grade waste marine clays as fillers and binders in UHPC and normal concrete, respectively and 3) Carbon capture in UHPC using GGBS and pressurized carbon curing. The wastes were characterized for their composition using XRD, …

    nus Repository record for DEVELOPMENT OF SUSTAINABLE CEMENTITIOUS COMPOSITES THROUGH WASTE VALORISATION AND CARBON CAPTURE (opens in a new tab) Download file for DEVELOPMENT OF SUSTAINABLE CEMENTITIOUS COMPOSITES THROUGH WASTE VALORISATION AND CARBON CAPTURE (opens in a new tab)

  14. Curing Properties of Epoxy Resins for Use to Abandon Wells Destroyed by Hurricanes in the Gulf of Mexico

    … destroyed and toppled. This project tested the curing properties of several epoxy resin systems in different environments. A bisphenol-F/epichlorohydrin (BPF) resin cured by curing agent MBOEA system was successfully tested in the laboratory as a potential plugging material to abandon wells …

    tamu Repository record for Curing Properties of Epoxy Resins for Use to Abandon Wells Destroyed by Hurricanes in the Gulf of Mexico (opens in a new tab)

  15. The technology and economics of recycling scrap rubber.

    … to material mechanics; (iii) the estimation of curing agent distribution in a crumb incorporated rubber vulcanizate; and (iv) the economics of the cryogenic grinding of scrap rubber tyres.The property relationships of vulcanizates incorporating recycled rubber have been studied using several …

    sheffield-hallam Download PDF for The technology and economics of recycling scrap rubber. (opens in a new tab)

  16. Altering an Epoxy-Amine Thermoset's Performance Through Varying Mix Ratios

    … conditions, which may include epoxy resin to curing agent mix ratio (Part A : Part B), cure time, and cure temperature, for example. Due to proprietary reasons, it can be difficult to understand why these values are provided, and more importantly, the consequences when deviating from the …

    calpoly Repository record for Altering an Epoxy-Amine Thermoset's Performance Through Varying Mix Ratios (opens in a new tab)

  17. Engineering CNT/PDMS films for high efficiency photoacoustic generations with tunable sub-MHz frequency

    … area. Additionally, we adjusted the PDMS base to curing agent ratio and discovered that the 2:1 ratio’s optoacoustic conversion ef- ficiency is 1.6 times greater than the typical 10:1 ratio. Our work offers a potential way to increase photoacoustic conversion rate by optimizing CNT/PDMS films’ …

    bu Repository record for Engineering CNT/PDMS films for high efficiency photoacoustic generations with tunable sub-MHz frequency (opens in a new tab)

  18. Generic studies on the oxytetracycline producing organism, Streptomyces alboflavus

    … the antibiotic oxytetracycline. Treatment with curing agents resulted in S. alboflavus losing the ability to produce oxytetracycline. However, the loss of oxytetracyc1ine production was reversible, and non-producing colonies regained the ability to produce oxytetracycline when the curing agent …

    cape-town Repository record for Generic studies on the oxytetracycline producing organism, Streptomyces alboflavus (opens in a new tab)

  19. Tuning the Processability of Thermal Stimuli-Responsive Lightly Crosslinked Liquid Crystalline Epoxy Networks

    … of catalysts to promote dynamic bonding, and curing agent selection to control formation of liquid crystalline domains. The aim of this work is to explore novel, commercially viable methods of fabricating and recycling using techniques to tune and preserve functional properties such as shape …

    utk-theses Repository record for Tuning the Processability of Thermal Stimuli-Responsive Lightly Crosslinked Liquid Crystalline Epoxy Networks (opens in a new tab)

  20. Low Density Epoxy Foams for Wind Energy Application

    … study is first carried out to characterize the curing of the applied epoxy-amine system. The modified Kamal’s model has the best agreement with the experimental data, suggesting that the maximum degree of cure is an important factor affecting curing behavior in the kinetic control region. …

    houston Repository record for Low Density Epoxy Foams for Wind Energy Application (opens in a new tab)

Page 1 of 5