Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"Current crowding"”.

  1. Electric current crowding effects in microstructured superconductors

    … inhomogeneities. The inevitable detour of current streamlines around such obstacles cause an inhomogeneous current density profile giving rise to current crowding. The goal of my research is to highlight the current crowding effects in micro and nanopatterned superconducting films.

    liege Repository record for Electric current crowding effects in microstructured superconductors (opens in a new tab) Restricted access

  2. Simulation of current crowding mitigation in GaN core-shell nanowire led designs

    … of low defect density GaN light emitting diodes. Current growth techniques and physical non-idealities make the production of high conductivity p-type GaN for the shell region of these devices difficult. Due to the structure of core-shell nanowires and the difference in conductivity between ntype …

    gatech Repository record for Simulation of current crowding mitigation in GaN core-shell nanowire led designs (opens in a new tab)

  3. Towards saturation of detection efficiency in superconducting single-photon detectors at 4.2 K using local helium ion irradiation

    … One factor that limits the DE is the critical current Ic, which is the maximum current before the superconductor switches to the normal state. Increasing device’s bias current towards the Ic can improve the DE. However, the device’s Ic is reduced due to constriction and current crowding at the …

    bu Repository record for Towards saturation of detection efficiency in superconducting single-photon detectors at 4.2 K using local helium ion irradiation (opens in a new tab)

  4. Electromigration and thermomigration reliability of lead-free solder joints for advanced packaging applications

    … performed to obtain activation energy (Q) and current density exponent (n), and to understand failure mechanisms. Joule heating was also taken into account. Q and n values were determined as follows: for Cu UBM solders, Q = 1.0 eV and n = 1.5; for Ni UBM solders, Q = 0.9 and n = 2.2. Important …

    texas Repository record for Electromigration and thermomigration reliability of lead-free solder joints for advanced packaging applications (opens in a new tab)

  5. Electromigration analysis of high current carrying adhesive-based copper-to-copper interconnections

    … and therefore, are subjected to higher current densities. However, the technology is now reaching its fundamental limitations in terms of pitch, processability, and current-handling due to electromigration. Electromigration in solder bumps is one of the major causes of device failures. …

    gatech Repository record for Electromigration analysis of high current carrying adhesive-based copper-to-copper interconnections (opens in a new tab)

  6. On-chip Spiral Inductor/transformer Design And Modeling For Rf Applications

    … of skin effect and proximity effect as cause of current crowding in the inductor metal. A model method embedded with new explanation of current crowding is proposed and its applicability in differential inductor and balun is validated. This study leads to a robust optimization routine to improve …

    ucf Repository record for On-chip Spiral Inductor/transformer Design And Modeling For Rf Applications (opens in a new tab)

  7. Modeling and Analysis of GaN/InGaN Light Emitting Diodes

    … been analyzed with the use of band diagrams, current distribution, radiative recombination rate and IV plots.;Different layers of the device have been studied and analyzed and certain design changes to achieve an enhancement in the efficiencies are proposed. The problem of current crowding in …

    wvu Repository record for Modeling and Analysis of GaN/InGaN Light Emitting Diodes (opens in a new tab)

  8. Plasmonic Superconducting Single Photon Detector

    … input optical signal. (2) Enhancing the critical current of the nanowires by reducing the current crowding at the bend areas through optimally rounded-bend implementation. The experimental system quantum efficiency and fluctuation rates per second are assessed and compared to the proposed …

    waterloo Repository record for Plasmonic Superconducting Single Photon Detector (opens in a new tab)

  9. Reliable clock and power delivery network design for three-dimensional integrated circuits

    … in short runtime. In the fifth work, current crowding and its impact on 3D power grid integrity is investigated. Due to the geometry of TSVs and connections to the global power grid, significant current crowding can occur. The current density distribution within a TSV and its …

    gatech Repository record for Reliable clock and power delivery network design for three-dimensional integrated circuits (opens in a new tab)

  10. MODELING OF NANOSCALE ELECTRICAL JUNCTIONS AND ELECTRICAL CONTACTS

    … of ohmic, Schottky or tunneling type. Nonuniform current distribution and current crowding across electrical contacts lead to nonuniform heat deposition, formation of local thermal hotspots, aggravation of electromigration, and in the worst scenario, lead to thermal runaway and breakdown of the …

    msu Repository record for MODELING OF NANOSCALE ELECTRICAL JUNCTIONS AND ELECTRICAL CONTACTS (opens in a new tab)

  11. Operating voltage constraints and dynamic range in advanced silicon-germanium HBTs for high-frequency transceivers

    … specifications, so the role of avalanche-induced current-crowding (or "pinch-in") effects on transistor performance and reliability are carefully studied. Also, the effects of intermodulation distortion are examined at the transistor-level for new and better understanding of the limits and …

    gatech Repository record for Operating voltage constraints and dynamic range in advanced silicon-germanium HBTs for high-frequency transceivers (opens in a new tab)

  12. Gold free ohmic contacts for III-V MOSFET devices

    … investigated in this thesis is the impact of current crowding effects on source/drain contact resistance by aggressive scaling of devices. During this thesis, optimisation of a PdGe-based ohmic contact to buried channel device material with a In0.75GaAs channel led to a contact resistance of …

    glasgow Download PDF for Gold free ohmic contacts for III-V MOSFET devices (opens in a new tab)

  13. InGaN šviestuko tyrimas mažo sužadinimo dažninės skyros metodu /

    … larger beam diameters, averaging out the current crowding related effects notable in the case of small signal time-domain measurements. The DLTs measured by both techniques are shown to agree well with each other, but saturate at low currents, contrary to the trend predicted by the …

    vilnius Repository record for InGaN šviestuko tyrimas mažo sužadinimo dažninės skyros metodu / (opens in a new tab)

  14. Diffusion-Driven Charge Transport in III–V Optoelectronic Devices

    … mainly comprise (1) resistive losses and (2) current crowding that can strongly increase heat generation at high powers, as well as (3) contact shading, which can notably reduce the illumination of solar cells. This thesis explores the possibilities of diffusion-driven charge transport (DDCT) …

    aalto Repository record for Diffusion-Driven Charge Transport in III–V Optoelectronic Devices (opens in a new tab)

  15. Vertically structured Silicon quantum dot solar cell based on Molybdenum conductive contact substrate

    … forming a mesa-type p-i-n structure. However, a current-crowding effect arises due to the thinness and highly resistive nature of this mesa-type structure, limiting the current from the device to a negligible level. In order to minimize the current-crowding effect, this thesis proposes a vertical …

    unsw Repository record for Vertically structured Silicon quantum dot solar cell based on Molybdenum conductive contact substrate (opens in a new tab)

  16. Electromigration and chip-package interaction reliability of flip chip packages with Cu pillar bumps

    … results revealed a significant reduction in the current crowding effect when C4 solder joints was replaced by Cu pillar structures. As a result, the current-induced Joule heating and local temperature gradients were reduced in the Cu pillar structure. This was followed by a study of the impact of …

    texas Repository record for Electromigration and chip-package interaction reliability of flip chip packages with Cu pillar bumps (opens in a new tab)

  17. Impacto da forma de defeitos padronizados e direção do campo magnético em diodos supercondutores

    … a coexistência da aglomeração de corrente (current crowding) e da corrente de blindagem de Meissner para campos magnéticos inferiores a Hstop, e o aprisionamento de fluxo no volume (bulk pinning) para campos superiores a Hstop. A segunda análise investigou a dependência angular da eficiência …

    brazil-ufv Repository record for Impacto da forma de defeitos padronizados e direção do campo magnético em diodos supercondutores (opens in a new tab)

  18. Superconducting Microwires with Extended Regular Perforation Patterns

    … create a resistive hotspot, which produces a current-crowding effect. This current-crowding effect reduces the superconducting energy gap near the hotspot, which results in the nanowire changing from a superconducting to a normal state near the hotspot. The resulting high impedance causes the …

    zurich

  19. Gallium nitride light-emitting diode enabled visible light communications

    … achieved by mitigating two limitations, namely current crowding and mutual device heating.Two novel techniques were developed to access pixel performance: spatially-resolved mapping of modulation bandwidth and spectral characteristics, and thermal imaging. On this basis, broad-area LEDs were …

    strathclyde Repository record for Gallium nitride light-emitting diode enabled visible light communications (opens in a new tab)

  20. Development of High Current Electromigration Test System for Evaluation of Novel Solder Structures

    … power requirements. In this study, a novel high current electromigration test system, including a temperature sensing capability, was designed and developed for the purpose of performing electromigration characterization of various BGA solder joint structures, including features designed for …

    ucf Repository record for Development of High Current Electromigration Test System for Evaluation of Novel Solder Structures (opens in a new tab)

Page 1 of 2