Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 73 for “"Current limit"”.
-
Current limitation in mercury vapour discharges
<p>This thesis constitutes a study of the current limitation phenomenon of a low pressure arc discharge in mercury vapour.</p> <p>A new theory is presented which provides a theoretical relation between the D.C. current limit, I<sub>L</sub> and the independent discharge parameters of gas density p …
-
Systems for the radiative trapping of lithium and the tuning of its interactions via magnetic field control
… implemented using feedback from an Ultrastab 866 current sensor. The system provides a fractional current stability of 1 part in 10 4 —a factor of four improvement over the previous scheme where the current limit of the supply was relied upon for stability.
-
Control strategies of MMC-HVDC connected to large offshore wind farms for improving fault ride-through capability
… converter (MMC) - high voltage direct current (HVDC) system connected to large offshore wind farms and performs simulations. In offshore wind power plants, HVDC system is indispensable for long-distance high-capacity transmission. The voltage rise of HVDC-link happens inevitably due to …
-
Direct study of quantum statistics in a degenerate Bose gas
… factor of two below the Poissonian (shot noise) limit. Current limit to Fock state creation for even smaller atom number is also discussed.
-
DEVELOPMENT OF GALLIUM-INDIUM ALLOYS AS NONMAGNETIC TEST MASSES FOR SPIN-DEPENDENT SHORT-RANGE FORCE EXPERIMENTS
… very low magnetic susceptibility. We believe the current limit on the NMR frequency shift ceramic (2.6 ± 1.7 10$^{-5}$ Hz), salt water (-0.8 ± 2.6 10$^{-5}$ Hz) due to such spin-dependent forces from a previous experiment using Macor ceramic and 1.02% MnCl$_2$ solution can be improved with the use …
-
Extracting and utilizing hidden structures in large datasets
… for the design of algorithms that surpass the current limit, and empower new applications in database research and many other data-centric disciplines.
-
The Observation of DE-excitation Photons Used to Determine Nucleon Emission after Muon Capture on Aluminum, Titanium and Lead
… of four orders of magnitude beyond the current limit set by the SINDRUM II collaboration. In order to achieve this sensitivity a thorough understanding of the background rates and a precise measurement of the number of muons captured on the target is required. Therefore, the AlCap …
-
Reliability based design of light gauge timber connectors
… design guidelines are not compatible with the current Limit States Design Code in Canada. Various issues related to the existing joist hanger test procedures were studied to identify the important criteria for possible adaptation to current Canadian design standards, while maintaining the link …
-
Confinement Limits For Tensile Lap Splices Under Static Loading
… code provisions are partially based. However, a limit exists on the benefit that can be derived from this confinement. In Canada, CSA Standard CAN3 A23.3 M-84, does not directly recognize the confinement benefit provided by stirrups along a lap splice. The current study shows that the ACI limit …
-
Análise da utilização do syntochronverter na geração fotovoltaica
… in addition to the control of the output current limit, to protect the inverter components, direct current (DC) link control, for the proper functioning of the DCDC converter, and self-synchronization with the network. The parameters for this control of the link are calculated based on a …
-
Investigation of High Performance AC/DC Front-End Converter with Digital Control for Server Applications
… the passive component size, its effectiveness is limited by the converter efficiency and thermal management. Technologies to further increase the power density without compromising the efficiency need to be studied. The industry today is also at the beginning of transferring their design from …
-
Design of a DSP-based servo speed controller
… model to predict the motor temperature. A current limit regulator is developed to maintain the motor temperature below this insulation limit, and to maximize the motor output once the limit is reached. A simulation scheme for this servo system is developed to investigate the control …
-
Beam Breakup Instability and Coherent Synchrotron Radiation Limits of the Particle Accelerator CBETA
… Energy recovery allows CBETA to produce a beam current much higher than with conventional storage rings. This thesis focuses on two important limits of CBETA: the beam current limit due to Beam Breakup (BBU) instability and the bunch charge limit due to Coherent Synchrotron Radiation (CSR) …
-
Measurement of proton and alpha-particle quenching in LAB based scintillators and determination of spectral sensitivities to supernova neutrinos in the SNO+ detector
… necessary to reach a sensitivity above the current limit in 76Ge of T1/2(0v) > 2.1 x 10^(25) y (90% C.L.). For 0.3% Te-loading, the quenching parameter obtained is kB = (0.0070 +/- 0.0004) cm/MeV for Alpha-particles and kB = (0.0090 +/- 0.0003) cm/MeV for protons. Additionally, the spectral …
-
Smart Power Module for Distributed Sensor Power Network of an Unmanned Ground Vehicle
… where conversion losses directly set the upper limit of system efficiency. A wide variety of commercially available DC-DC conversion elements have inefficiencies in the 90-97% range. The efficiency range of most common commercial-off-the-shelf (COTS) power supplies is 75-85%, highlighting the …
-
An analysis of the effects of feedline and ground screen noise currents on a conical monopole receiving antenna
… analyzed the susceptibility of the CM to EMI/RFI currents that might be injected onto the feedline from equipment in the building at the center of the CDAA. The Numerical Electromagnetics Code (NEC) was used to model the CM and its buried feedline at the Imperial Beach CDAA site. The numerical …
-
Thermo-Mechanical Processing and Advanced Charecterization of NiTi and NiTiHf Shape Memory Alloys
… cold working) have not been well understood. Current Ni-Ti based SMAs could be improved upon by increasing their work output, improving dimensional stability, preventing accidental actuation, and reducing strain localization. Additionally, there is a strong need to increase the transformation …
-
GENE SILENCING TO ENABLE LOWER LIMITS OF DETECTION FOR PHAGE-BASED BIOSENSORS
… the presence of the host bacterium. The current limit of detection of E. coli in drinking water using phage-based biosensors is <10 CFU/100 mL. This study investigates decreasing the limit of detection of E. coli by reducing background signals to undetectable levels. We will accomplish …
-
Study of the rare decay K(L) →e⁺e⁻μ⁺μ⁻ at KTeV
… interaction. Finally, a 90% C.L. upper limit of 4.12 x 10⁻¹¹ was placed on the branching ratio of the lepton flavor-violating mode K(L) → e⁺/⁻ e⁺/⁻μ⁺/⁻μ⁺/⁻, a full factor of 3 improvement over the current limit.
-
Evolution of current mode control approaches for implementation in rapid capacitor charger technology
… power management parameters to these systems. Current mode control is seen as a desirable control method for the power inverter to quickly charge the capacitor bank. An analog current mode control platform has been demonstrated at the P3E (pulsed power and power electronics) Laboratory. …
Page 1 of 4