Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Current mirrors"”.

  1. Structured analog design in deep sub-micron technologies using CMOS inverters and current mirrors

    … modules based on the class-AB CMOS inverters and current mirrors are described to perform basic operations such as addition, subtraction, scaling and integration. The design approach uses replica-circuits extensively to control the large process, voltage and temperature (PVT) variations …

    texas Repository record for Structured analog design in deep sub-micron technologies using CMOS inverters and current mirrors (opens in a new tab)

  2. Design and security of analog and mixed-signal circuits with innovations in temperature sensing for power/thermal Management, Trojan detection in analog filters, and optimization for programmable current mirrors

    … low sensitivity to variations in bias current caused by temperature fluctuations across the die. This low sensitivity allows for compactness, while the self-referencing capability ensures great accuracy of the digital conversion. Both dual-temperature and single-temperature calibration …

    iastate Repository record for Design and security of analog and mixed-signal circuits with innovations in temperature sensing for power/thermal Management, Trojan detection in analog filters, and optimization for programmable current mirrors (opens in a new tab)

  3. Σχεδίαση αναλογικών ολοκληρωμένων φίλτρων χαμηλής τάσης τροφοδοσίας με χρήση καθρεπτών ρεύματος

    … analog filters using low-voltage high swing current mirrors are introduced. The resonant frequency of the proposed filters can be electronically controlled by modifying appropriate dc currents. Thus, any effect from process, voltage and temperature variations can be eliminated. At first, …

    greece Repository record for Σχεδίαση αναλογικών ολοκληρωμένων φίλτρων χαμηλής τάσης τροφοδοσίας με χρήση καθρεπτών ρεύματος (opens in a new tab)

  4. Design of a Wide-Swing Cascode Beta Multiplier Current Reference

    … the design of a wide-swing, cascode β multiplier current reference to be used as a biasing circuit. The current reference has been fabricated in a 0.5mm CMOS technology. First, a review of wide-swing cascode current mirrors and current-source self-biasing is covered. Then, the process of designing …

    ut-knoxville Repository record for Design of a Wide-Swing Cascode Beta Multiplier Current Reference (opens in a new tab)

  5. Application specific DAC and ADC for a bio-impedance measurement circuit

    … of a bio-impedance measurement system in which a current is injected into the myocardium tissue and blood pool for the purpose of determining the heart’s stroke volume. The DHC DAC injects a 100 μA[subscript rms] current at a 20 kHz fundamental frequency using appropriately weighted current …

    texas Repository record for Application specific DAC and ADC for a bio-impedance measurement circuit (opens in a new tab)

  6. Circuit blocks design for a current-mode CMOS image sensor chip

    … presents the design and implementation of a current-mode computational CMOS image sensor that performs video image compression based on the CRVDC (conditional replenishment video data compression) algorithm. With such on-chip pre-processing, a compression ratio of 10:1 can be achieved without …

    uvic Repository record for Circuit blocks design for a current-mode CMOS image sensor chip (opens in a new tab)

  7. Design of current-mode building blocks and their application in A/D conversion

    … size, low power supply and wide dynamic range. Current mode circuits are reported to be advantageous as compared to voltage mode circuits. Moreover, current mode circuits are easily realisable with any standard digital CMOS process. The research work done in t his thesis can be divided into two …

    uvic Repository record for Design of current-mode building blocks and their application in A/D conversion (opens in a new tab)

  8. Optimization of SiGe HBT BiCMOS analog building blocks for operation in extreme environments

    … on SET in circuits, two different types of current mirrors (a basic common-emitter current mirror and a Wilson current mirror) were fabricated using a SiGe HBT BiCMOS technology and exposed to laser-induced single events. The SET measurements were performed at the U.S. Naval Research …

    gatech Repository record for Optimization of SiGe HBT BiCMOS analog building blocks for operation in extreme environments (opens in a new tab)

  9. Applications of floating-gate based programmable mixed-signal reconfigurable systems

    … circuits. Various circuit blocks including current mirrors, gilbert multipliers, and $G_m-C$ filters were designed and experimentally demonstrated to show reduced mismatch effects. Such floating-gate transistors and circuits are the basis for the reconfigurable systems developed in this …

    gatech Repository record for Applications of floating-gate based programmable mixed-signal reconfigurable systems (opens in a new tab)

  10. An electrically driven 8-14µm band solid-state modulator

    … design of the modulator suffers from uneven current flow through its electrodes due to parasitic resistances, the use of current mirrors is proposed to force current through different regions of the electrode to improve its performance.

    soton Download PDF for An electrically driven 8-14µm band solid-state modulator (opens in a new tab)

  11. A Portable, Low Power Radiation Detection and Identification System for High Count Rate, Long Term Monitoring

    … for slower detectors is based on an array of current mirrors that sample and remove an error current that would otherwise cause significant spectral corruption at higher count rates, while the other is meant for faster detectors and mitigates the error current corruption by stabilizing the …

    nebraska Repository record for A Portable, Low Power Radiation Detection and Identification System for High Count Rate, Long Term Monitoring (opens in a new tab)

  12. Low voltage temperature sensor design for on-chip thermal management

    … Device mismatches in the sensing diodes, the current mirrors, the error correction amplifier, etc, result in large error in the measured temperature, which leads to worse accuracy performance than the BJT-based temperature sensor. Various error correction techniques have been studied and …

    ttu Repository record for Low voltage temperature sensor design for on-chip thermal management (opens in a new tab)

  13. The characterization and model optimization of an analog integrated circuit standard cell library.

    … field-effect transistor), poly resistors, current mirrors, comparators, bias generators, voltage references, op-amps, and voltage regulators. The spice model used for simulation was the BSIM3 (Berkeley Simulator version 3) model. Tanner Research designed the majority of the standard cells …

    louisville Repository record for The characterization and model optimization of an analog integrated circuit standard cell library. (opens in a new tab)

  14. Memristor based arithmetic circuit design

    … the help of a well-known analog element called current mirror. Previously known logic-implication technique to realize digital gates comes with a serious limitation of limited fan-out. By using current mirrors, this limitation can be overcome, enabling more logic operations to run in parallel. …

    texas Repository record for Memristor based arithmetic circuit design (opens in a new tab)

  15. Synthesis and structures of transconductance amplifier and current conveyor-based filters

    … operational transconductance amplifiers and current conveyors. Starting from an nth-order generic transfer function, it is shown how an analytical synthesis approach can be used to generate systematically filters that have less component count than previously known filters whilst maintaining …

    soton Download PDF for Synthesis and structures of transconductance amplifier and current conveyor-based filters (opens in a new tab)

  16. CMOS/Bipolar current conveyor design and development

    … programme was to design and develop a novel CMOS current conveyor, to improve areas such as bandwidth, slew rate, gain, and Powe- Supply Reject Ratio (PSRR). The current conveyor can be used in low frequency applications such as LED drivers for mobile phones and televisions, and high frequency …

    oxford-brookes Repository record for CMOS/Bipolar current conveyor design and development (opens in a new tab) Download PDF for CMOS/Bipolar current conveyor design and development (opens in a new tab)

  17. Analog integrated circuit design in ultra-thin oxide CMOS technologies with significant direct tunneling-induced gate current

    … oxide thickness, is a source of MOSFET gate current. Its existence invalidates the simplifying design assumption of infinite gate resistance. Its problems are typically avoided by switching to a high-&kappa/metal gate technology or by including a second thick(er) oxide transistor. Both of …

    rit Repository record for Analog integrated circuit design in ultra-thin oxide CMOS technologies with significant direct tunneling-induced gate current (opens in a new tab)

  18. Analysis and design of high-transconductance RF mosfet voltage to-current converters

    … of "HighTransconductance RF MOSFET Voltage-to-Current (V-I) Converters". Various V-I converter circuits published in the past have been reviewed by the author in order to understand the different techniques employed to improve transconductance (Gt), linear operating range and total harmonic …

    oxford-brookes Repository record for Analysis and design of high-transconductance RF mosfet voltage to-current converters (opens in a new tab) Download PDF for Analysis and design of high-transconductance RF mosfet voltage to-current converters (opens in a new tab)

  19. New MOSFET modeling algorithms and their use in CAD of analog IC building blocks

    … the design of analog IC building blocks ( e.g. current sources/sinks, single stage amplifiers, simple and cascode current mirrors, voltage divider, differential amplifier, and three stage operational amplifier)

    concordia Download PDF for New MOSFET modeling algorithms and their use in CAD of analog IC building blocks (opens in a new tab)

Page 1 of 2