Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 65 for “"Curved beam"”.
-
Curved Beam Theory Applied to Opening Design
Made available in DSpace on 2014-12-10T17:57:38Z (GMT). No. of bitstreams: 1 6408344.pdf: 5451738 bytes, checksum: ef2696f2d786cca6e7aaf75e5f174df6 (MD5) Previous issue date: 1964
-
Generalized straight and curved beam theories with isogeometric analyis
… is employed for the analysis of a homogenous beam element of arbitrary cross section (thin- or thick- walled) taking into account nonuniform warping and shear deformation effects (shear lag due to both flexure and torsion), considering B-splines for the approximation of the fictitious loads. …
-
A curved beam element and its application to traffic poles
Curved traffic poles may vibrate noticeably when excited by the wind. The finite element method can be utilized to analyze these beam-like structures. A three-node, curved beam element has been developed for the s atic and dynamic analysis of curved poles. Shear deformation as well as rotary …
-
A Geometrically nonlinear curved beam theory and its finite element formulation
This thesis presents a geometrically exact curved beam theory, with the assumption that the cross-section remains rigid, and its finite element formulation/implementation. The theory provides a theoretical view and an exact and efficient means to handle a large range of nonlinear beam problems. A …
-
An investigation of the effects of curvatures on natural vibration characteristics of curved beams and plates
Curved structures are mostly investigated through the numerical method. In the numerical model, the curved beam or plate is easily simulated by assembled elements. Although the approximate solution can be obtained, numerical results are inadequate to demonstrate the effect of the curvature on the …
-
Analysis of curved composite beam
… last several decades the analysis of straight beams has received considerable attention while there is very little focus on curved composite beams.;In the present study, the formulation of the bending of a curved composite beam is based on the bending theory of thick shells. A variational …
-
Kinematics of Curved Flexible Beam
… begin by applying displacements are applied to a curved beam that cause it todeflect in a manner consistent with spherical kinematics. The motion of the beam is calculated using Finite Element Analysis. These results areanalyzed to give the PRBM parameters. These PRBM parameters vary with the arc …
-
A small strain, large rotation theory and finite element formulation of thin curved beams
… for the geometrically nonlinear analysis of thin curved beam-type structures is proposed and an associated displacement finite element formulation developed. An exact two-dimensional large rotation theory, which is based on an intrinsic coordinate system, has been developed. Four alternative …
-
Graphs and tables for the analysis and design of curved concrete beams
… and at any intermediate point along a circularly curved beam. The investigation includes both cantilever beams and fixed ends beams, loaded with a uniformly distributed load, concentrated loads or a combination of the two. The solutions of the equations have been presented in a graphical form for …
-
Analytical approaches to predict flexural behaviour of curved composite beams
<p>This thesis is concerned with the analysis of curved laminates and sandwich beams with a focus on delamination and instability.</p><p>An elasticity-theory-based approach is developed for delamination and flexural strength of curved layered composite laminates and sandwich beams. The governing …
-
Control of a Beam and Ball System with Arbitrarily Shaped Smooth Beams
… model for the problem of controlling a ball on a curved beam for any beam defined by y = f(x). The model is converted to dimensionless parameters and simulated. The performance of LQR with a model for the motor in the controls lab at the University of Maryland College Park is studied and a …
-
A Finite Element for the Three-Dimensional Deformation of a Circular Ring of Arbitrary Cross Section
… finite element for relatively compact, solid curved beams is derived. A node is located at the centroid of each end of the beam, and each node has six degrees of freedom, consisting of three translations and three rotations in mutually perpendicular directions. The element stiffness matrix has …
-
Spectral Element Analysis of Bars, Beams, and Levy Plates
… and a four DOF spectral Timoshenko beam element are also developed to gain insight into the performance of spectral elements. A cantilever beam example is used to show how incorporating eigenfunctions for the dynamic governing PDE into the displacement field enables spectral beam …
-
Vibration suppression of straight and curved beams traversed by moving loads
Vibration suppression of beams traversed by moving loads, using optimal Tuned-Mass-Damper (TMD) systems, is investigated. This study is performed on two different geometrical shapes of the beam, namely, uniform homogenous straight beam, and the uniform homogenous curved beam. Initially, three …
-
Analysis and Design of a Flexible Tooth Gear
… of flexible gear teeth is treated as a classical curved beam deformation problem. A quasi-static, mechanics based model is used for computing displacements of slender tooth profiles subjected to contact forces that arise during the tooth engagement process. The teeth are analyzed as slender …
-
Horizontally curved concrete I -girder bridges
… of structural analysis methods for horizontally curved bridges and the current practice of curved prestressed concrete. The paper also documents a study of curved beam theory along with fundamental analyses and designs of prestressed concrete. The study is supplemented by laboratory tests of …
-
Combined linear/nonlinear stability analysis of plane and space frames
… element in ABAQUS is capable of modeling the curved beam. The modeling procedure of the dome cap model is discussed. Finally, conclusions and recommendations are made for future studies.
-
A Pseudo-Rigid-Body Model For Spherical Mechanisms: The Kinematics and Elasticity of a Curved Compliant Beam
… the elastic portion of the analysis of a curved compliant beam. This analysis is used to develop a Pseudo-Rigid-Body Model for the curved compliant beam. The Pseudo-Rigid-Body Model consist of kinematic and elastic parameters which can be used to simplify the computation of the large …
-
DEVELOPMENT OF NEMS RELAYS IN LOGIC COMPUTATION AND RUGGED ELECTRONICS
… Next, a vacuum encapsulated Silicon-to-Silicon curved beam MEMS switch demonstrates at least 10<sup>6</sup> logic cycles with temperature range from -60 ?C to 400 ?C. The switch is also verified to be functional under high acceleration from 1 ? 10 g @2kHz.
Page 1 of 4