Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Cut-cell"”.
-
Adaptive mesh refinement and cut-cell algorithms for DSMC simulation of hypersonic flows.
Adaptive mesh refinement (AMR) and cut-cell algorithms were developed for a 3-level Cartesian mesh based Direct Simulation Monte Carlo (DSMC) implementation. The simple and efficient AMR algorithm adapts the cell size to the local mean free path of the flow field. Variable time step technique was …
-
Computational modeling of plasma-assisted shock wave control using the Cartesian cut cell method
… we enhance the APDL-CFD code with the Cartesian cut cell method, which allows the representation of complex geometries on a Cartesian mesh. This research represents geometries found in wind tunnel models and internal vehicle designs. Using the cut cell method, the model can capture flow caused by …
-
A Second Order Linear Discontinuous Cut-Cell Discretization for the SN Equations in RZ Geometry
… implementation, and testing of a new cut-cell discretization for the discrete ordinates form of the neutron transport equation. This method provides an alternative to homogenization for problems containing material interfaces that do not coincide with mesh boundaries. A line is used to …
-
An energy-conservative cut-cell method and advanced B-spline-based filtering method for flow simulation
The student, Yong Yi Bay, submitted this Dissertation for approval on 2019-11-25 at 14:52.
-
Numerical and Experimental Study of Screw Machines with Large Helix Angle
… helix angles can produce highly skewed numerical cells which can make simulation unreliable. From the established literature, the two main approachesto generate structured deforming mesh for CFD analysis of twin screw machines are algebraic and differential. The purpose of this thesis is to …
-
Robust Fluid Simulation over Complex Boundaries
… domain is decomposed through the use of a novel cut-cell mesh generation algorithm that robustly captures arbitrarily small features at a fraction of the computational cost of tetrahedralization algorithms and without the homogenizing artifacts seen in voxelization like the loss of narrow …
-
Topology and shape optimization in fluid mechanics & conjugate heat transfer using continuous adjoint with consistent discretization
… by introducing a single design variable per grid cell which stands for an impermeability and indicates whether each cell is occupied by fluid or solid material. Ideally, binary designs, where all the design variables take on 0/1 values, are expected. In view of this and to avoid well–known …
-
Eulerian-Lagrangian Simulation of Turbulent Flow with Finite-Size Particles
… the discrete forcing approach and the cut-cell method. It is concluded that the cut-cell method is a superior technique for studying particulate flows due to the less severe spurious force oscillations (SFOs) on a coarse grid. Simulation of particles in a two-dimensional channel shows …
-
An Analysis of the Immersed Boundary Surface Method in foam-extend
… the background mesh in a manner similar to the cut-cell approach. In this thesis, the implementation and limitations of the Immersed Boundary Surface method in foam-extend 4.1 nextRelease branch are investigated and analysed. In foam-extend, the Immersed Boundary method was already implemented …
-
Preserving geometry and topology for fluid flows with thin obstacles and narrow gaps
… intersect the solid boundary geometry with the cells of a background regular grid to generate a topologically correct, boundary-conforming cut-cell mesh. We extend both pressure projection and velocity advection to support this enhanced grid structure. For pressure projection, we introduce a …
-
A Study of Impinging Gas Jets On Liquid Surfaces
… developed. The technique combines the Cartesian Cut Cell and Volume of Fluid method and the surface boundary was modelled a a pressure boundary. The numerical code was tested with the Broken Dam and wave instability problems. Both showed good agreement with the reported physical phenomena. …
-
Development of an AMR Octree DSMC approach for shock dominated flows
… multi-scale physics. It is coupled with a robust cut-cell algorithm to incorporate complex triangulated geometries. With the use of distributed memory systems and Message-Passing-Interface (MPI) for communication, the code is potentially scalable. However, to simulate continuum-like conditions …
-
Nanoscale surface modification of wood veneers for adhesion
Surface chemistry of wood is based on the exposed cut surface that is the combination of intact (lumen wall) and cut cell wall material. It is inherently complex and changes with history of processing. Modification of wood surface through noncovalent attachment of amine containing water soluble …
-
Simulation of In-Flight Rime Icing Using a Non-Body-Fitted Mesh
… software by ANSYS, Inc. Immersed boundary and cut-cell methodologies are explored for the droplets near the boundary. It was found that the developed cut-cell methodology is about twice as accurate as the immersed boundary method developed and that this is one of the dominant discretization …
-
TOWARDS LARGE-SCALE SIMULATIONS OF TWO-PHASE FLOWS WITH MOVING CONTACT LINES IN COMPLEX GEOMETRIES
… to capture the interface and a conservative cut-cell immersed boundary method to handle complex geometries. Detailed verification tests confirm that simulations using this framework are discretely conservative, accurate, and robust. Secondly, a physics-based closure is derived for the SGS …
-
Animating Coupling between Inviscid Free-Surface Liquids and Elastic Deformable Bodies
… in very taxing scenarios. Furthermore, use of a cut-cell discretization methodology allows us to accurately apply proper free-slip boundary conditions at the exact solid-fluid interface. Consequently, our method is capable of correctly simulating inviscid tangential flow, devoid of grid artefacts …
-
Non-Body Conformal Grid Methods for Large-Eddy Simulations of Compressible Flows and their Applications in Computational Aeroacoustics
… developed and assessed in this work: the ghost-cell based immersed boundary method (GC-IBM) and the ghost-cell based cut-cell method (GC-CCM). In both methods, the boundary conditions on the immersed boundary are enforced through the use of ``ghost cells'' located inside the solid body. …
-
Novel Paradigms in Physics-Based Animation: Pointwise Divergence-Free Fluid Advection and Mixed-Dimensional Elastic Object Simulation
… smooth discrete potential fields on uniform and cut-cell grids. This thesis also introduces an improved ramping strategy for the “Curl-Noise” method of Bridson et al. (2007), which enforces exact no-normal-flow on the exterior domain boundaries and solid surfaces. The ramping method in the thesis …
-
Comparative Analysis and Optimization of Control Strategies for Single Axis Tracking Solar Arrays on Skewed Topography
… site, evaluated across both standard and half-cut cell shading models and under both mechanically limited and unconstrained rotational bounds. Additionally, these strategies cover both the case of a single motor actuating the array as well as the case of individual motors for each row. For …
-
Automatic parallel octree grid generation software with an extensible solver framework and a focus on urban simulation
… of the target geometry, and as such, no cut-cell algorithm, projection method, or immersed boundary condition are implemented. In this case, 'zeroth' order means that no geometry is ever exactly represented in the final computational mesh: an octree element is either completely in the …
Page 1 of 2