Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 6 of 6 for “"Cutting Force Modeling"”.

  1. Digital Cutting Force Modeling for Milling Operations

    … objective of this project is to advance digital modeling of the milling process by incorporating tool-specific geometry in the machining analysis. Structured light scanning will be used to perform tool geometry measurements and produce a 3D model. The 3D model data will include the spatial …

    utk-theses Repository record for Digital Cutting Force Modeling for Milling Operations (opens in a new tab)

  2. Mechanistic Cutting Force Modeling and Surface Finish in UD-CFRP Milling: Effects of Material Removal Modes

    … of this dissertation is to evaluate mechanistic cutting force modeling and surface finish in unidirectional carbon fiber reinforced polymer (UD-CFRP) milling and to investigate how material removal behavior and tool geometry affect force prediction and machined surface quality. Toray T800S-24K UD …

    utk-theses Repository record for Mechanistic Cutting Force Modeling and Surface Finish in UD-CFRP Milling: Effects of Material Removal Modes (opens in a new tab)

  3. Alternative Milling Path Planning Strategies and Force Modeling for Nickel-Based Superalloys

    … toolpath representation with semi-mechanistic cutting force models with correlations to the machining-affected zone (MAZ). Nickel-based superalloys are designed for use in extreme environments with high temperatures, where corrosion and creep resistance are required in addition to high levels …

    clemson Repository record for Alternative Milling Path Planning Strategies and Force Modeling for Nickel-Based Superalloys (opens in a new tab)

  4. Prediction of cutting forces in five-axis micro-ball end milling

    … Unfortunately, due to the high fragility of the cutting tool, premature tool failure has been a major challenge in micro-scale machining. Tool strength of a micro-ball end mill can be easily exceeded by the strain induced by cutting force, thus cutting force is desired to be accurately predicted. …

    uiuc Repository record for Prediction of cutting forces in five-axis micro-ball end milling (opens in a new tab)

  5. Material properties affecting cutting forces

    … constants in the proposed models that describe cutting resistance and therefore cutting force. The study is carried out for two types of workpiece materials, each from a different ISO-group. The investigated materials are 316L, an austenitic stainless steel, and 100Cr6, a high carbon through …

    chalmers Repository record for Material properties affecting cutting forces (opens in a new tab)

  6. Mechanistic modeling of cutting forces in wavy-edge bull-nose helical end-milling of Inconel 718 under different cooling-lubrication strategies

    … the results of the development of a mechanistic cutting force prediction model for the wavy-edge bull-nose helical endmill (WEBNHE). The mechanistic model was developed to predict cutting force components and the resultant cutting force in high-speed end-milling of Inconel 718 under two cooling …

    must-thes Repository record for Mechanistic modeling of cutting forces in wavy-edge bull-nose helical end-milling of Inconel 718 under different cooling-lubrication strategies (opens in a new tab)