Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"Cutting force model"”.

  1. Pilot Study for Cutting Force Model of Robotic Deburring

    The knowledge of machining forces in robotic machining is of critical importance to ensure the accuracy and stability of the tool-workpiece interaction. To that end, this thesis presents a method for applying conventional mechanistic milling models to the prediction of cutting forces generated …

    carleton Repository record for Pilot Study for Cutting Force Model of Robotic Deburring (opens in a new tab)

  2. On the development of a dynamic cutting force model with application to regenerative chatter in turning

    … processes in machining and is characterized by a cutting tool moving along the axis of a rotating workpiece as it removes material. A detrimental phenomenon to productivity in turning operations is unstable cutting or chatter. This can reduce the life of tooling, dimensional accuracy, and the …

    gatech Repository record for On the development of a dynamic cutting force model with application to regenerative chatter in turning (opens in a new tab)

  3. Experimental model for predicting cutting forces in machining carbon fiber reinforced polymer composites

    … mechanical performances such as Carbon Fiber Reinforced Plastics (CFRP) is increasing. However, there are major challenges in machining CFRP as it involves delamination, fiber pullouts, and extreme cutting tool wear. Analysis of chip formation mechanisms and prediction of associated cutting forces …

    uvic Repository record for Experimental model for predicting cutting forces in machining carbon fiber reinforced polymer composites (opens in a new tab)

  4. A generalized approach for mechanics of chip formation in steady-state and dynamic orthogonal metal cutting using a new model of shear zone with parallel boundaries and its validation to cutting-forces prediction in self-piloting machining

    … of chip formation based on a shear zone model with parallel boundaries that has been developed by applying the continuum mechanics to the analysis of the chip formation process. Such a model is formulated without imposing the assumptions commonly made in the single shear or parallel-sided …

    concordia Download PDF for A generalized approach for mechanics of chip formation in steady-state and dynamic orthogonal metal cutting using a new model of shear zone with parallel boundaries and its validation to cutting-forces prediction in self-piloting machining (opens in a new tab)

  5. Updated Force Model for Milling Nickel-based Superalloys

    … and material properties, the methods and models used must be adapted in order to keep pace. In this research, correlations are made, using fundamental principles, between measurements made with on-machine touch probes and the cutting tool's wear state, those correlations are used in an …

    clemson Repository record for Updated Force Model for Milling Nickel-based Superalloys (opens in a new tab)

  6. Machining process model for intelligent rough machining of sculptured parts

    … a strategy that allows the determination of such cutting data. Based on the specific requirements of the Intelligent Rough Machining Approach, together with the formulations laid out by the Mechanistic Force Modeling Method, a cutting force model is introduced. A combination of dependency testing …

    uvic Repository record for Machining process model for intelligent rough machining of sculptured parts (opens in a new tab)

  7. Reaction forces on a milling tool during three-axis milling

    … than does numerical output from a mathematical model. NC milling simulations can be used to verify tool paths, detect collisions, and check the material removal rate, which can be related to force feedback on the milling tool. A graphical simulation should make calculations and update displays …

    iastate Repository record for Reaction forces on a milling tool during three-axis milling (opens in a new tab)

  8. Digital Cutting Force Modeling for Milling Operations

    … objective of this project is to advance digital modeling of the milling process by incorporating tool-specific geometry in the machining analysis. Structured light scanning will be used to perform tool geometry measurements and produce a 3D model. The 3D model data will include the spatial …

    utk-theses Repository record for Digital Cutting Force Modeling for Milling Operations (opens in a new tab)

  9. Chip geometry, cutting force, and elastic deformation prediction for gear hobbing

    … accuracy and surface quality. Physics-based models are becoming more commonly employed in the manufacturing industry for traditional machining processes like turning, milling, and drilling. By utilizing such models, machining process planners can optimize productivity while preserving or …

    waterloo Repository record for Chip geometry, cutting force, and elastic deformation prediction for gear hobbing (opens in a new tab)

  10. Milling of flexible structures

    … deflections of the plate under periodic milling forces are modelled. A new dynamic cutting force model is developed which considers five discrete zones of relative motion between the tool and the workpiece. The kinematics of both milling and vibratory motions are modelled, which is an original …

    ubc Repository record for Milling of flexible structures (opens in a new tab) Download PDF for Milling of flexible structures (opens in a new tab)

  11. Predictive Models for Mechanistic Cutting Force Coefficients and Surface Roughness in Carbon Fiber Reinforced Polymers Milling with Tool Wear

    … these challenges by developing a predictive model for surface roughness in carbon fiber composite milling operations using a cutting force-based approach.</p> <p>This research applies a mechanistic cutting force model to force prediction in carbon fiber composite milling. Because tool wear …

    ut-knoxville Repository record for Predictive Models for Mechanistic Cutting Force Coefficients and Surface Roughness in Carbon Fiber Reinforced Polymers Milling with Tool Wear (opens in a new tab)

  12. Prediction and compensation of geometrical errors in milling process of thin components using a flexible configuration setup

    In this study, a prediction model based on finite element analysis is developed to predict cutting errors during the machining process of thin plates using a flexible setup configuration. The model is based on analysis of the material deformation of thin plates under the action of axial cutting …

    ets-quebec Download PDF for Prediction and compensation of geometrical errors in milling process of thin components using a flexible configuration setup (opens in a new tab)

  13. Mechanistic force model calibration for milling in multiple materials

    <p>Being able to measure and simulate cutting forces of milling is crucial to understanding the machining process at a higher level. The research objective of this thesis is to develop and validate a milling mechanistic cutting force model for a variety of materials that can be used to predict …

    ut-knoxville Repository record for Mechanistic force model calibration for milling in multiple materials (opens in a new tab)

  14. Modelling forces in milling screw rotors

    The deflections of screw rotors under machining forces cause mismatch between the male and female rotors and, consequently, accelerated wear and suboptimal efficiency in their performance. Optimizing the machining process to minimize the generated forces and accounting for the resulting mismatch in …

    uvic Repository record for Modelling forces in milling screw rotors (opens in a new tab)

  15. Modelling and compensation of positioning errors in robotic machining systems

    … machining robots. The kinematic and compliance models of a Stäubli RX-90 industrial robot are first formulated mathematically. In the developed model, it is assumed that the links of the robot are rigid, and therefore all flexibilities originate from the joints. A cutting force model is …

    manitoba Repository record for Modelling and compensation of positioning errors in robotic machining systems (opens in a new tab)

  16. Mechanistic modeling of cutting forces in wavy-edge bull-nose helical end-milling of Inconel 718 under different cooling-lubrication strategies

    … the results of the development of a mechanistic cutting force prediction model for the wavy-edge bull-nose helical endmill (WEBNHE). The mechanistic model was developed to predict cutting force components and the resultant cutting force in high-speed end-milling of Inconel 718 under two cooling …

    must-thes Repository record for Mechanistic modeling of cutting forces in wavy-edge bull-nose helical end-milling of Inconel 718 under different cooling-lubrication strategies (opens in a new tab)

  17. Desenvolvimento e avaliação de estratégias trocoidais para o fresamento do aço AISI 4340 temperado e revenido

    … decreases the engagement angle and reduces the cutting load on the cutting edges. The trochoidal trajectories have variations of their path which mainly influences the machining time. Information on the influence of this tool path variations are scarce in the literature. This research presents …

    brazil-ufrn Repository record for Desenvolvimento e avaliação de estratégias trocoidais para o fresamento do aço AISI 4340 temperado e revenido (opens in a new tab)

  18. Chatter stability of turning and milling with process damping

    … steel and thermal-resistant alloys at low ‎cutting speeds has been difficult due to unknown process damping contributed by the ‎contact mechanism between tool flank and wavy surface finish. This thesis presents ‎modeling and measurement of process damping coefficients, and the prediction of …

    ubc Repository record for Chatter stability of turning and milling with process damping (opens in a new tab) Download PDF for Chatter stability of turning and milling with process damping (opens in a new tab)

  19. Prediction of cutting forces in five-axis micro-ball end milling

    … Unfortunately, due to the high fragility of the cutting tool, premature tool failure has been a major challenge in micro-scale machining. Tool strength of a micro-ball end mill can be easily exceeded by the strain induced by cutting force, thus cutting force is desired to be accurately predicted. …

    uiuc Repository record for Prediction of cutting forces in five-axis micro-ball end milling (opens in a new tab)

Page 1 of 2