Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Cyclic Polarization"”.
-
Cyclic Polarization of AA 3102 in Corrosive Electrolytes Containing Sodium Chloride and Ammonium Sulfate
… tests with better reproducibility has risen. Cyclic polarization, that is an electrochemical test, was explored for its suitability for the assessment of AA 3102 tube material that is currently a popular aluminum alloy used in manufacturing of heat exchanger. Corrosive electrolytes containing …
-
Application of Cyclic Polarization of Aluminum 3003 Used in All-Aluminum Microchannel Heat Exchangers
… products. Electrochemical testing method of cyclic polarization was employed in this investigation and relevant parameters including electrolyte corrosive agent and its concentration, electrolyte pH, and applied potential scan rate was varied to find an optimal set of parameters. Results of …
-
Electrochemical corrosion testing of boronized and unboronized steels
… were also tested in these solutions. Linear Polarization, Tafel plots and Cyclic Polarization were the three techniques used to analyze the corrosion resistance of boronized and unboronized steels. Comparative studies revealed increase in corrosion resistance of AISI 1018 by 3-8 times, of …
-
Enhancing Corrosion Performance of Laser Modified NiTi Shape Memory Alloy
… crystallinity of the oxide and potentiodynamic cyclic polarization was used to determine oxide stability. Results showed that for a small number of pulses (i.e. low total energy input) corrosion performance was determined primarily by topographical effects. However, increasing the number of …
-
Electrochemical Properties of Rhodium-Plated Esthetic Orthodontic Archwires
… (OCP) was monitored for 2 hours followed by a polarization resistance test and cyclic polarization. OCP at 2 hours, polarization resistance (Rp), corrosion current (Icorr), and presence of pitting were determined. Results: OCP results at 2 hours favored the Iconix wire at 360±2 mV (vs SCE) …
-
Influence of Fluoride and Stress on the Electrochemical Properties of Nickel-Titanium Coils
… potential monitoring for 2 hours, a linear polarization scan, and a cyclic polarization test. The results showed the coils to possess a more noble OCP when in artificial saliva compared to fluoride. The non-compressed, artificial saliva group possessed the greatest polarization resistance (p
-
The role of applied potentials on cracking of Zircaloy-2
… Econt. The localized corrosion study using cyclic polarization indicates that the critical potentials became more active with increasing temperature. Secondary cracks were noted in a specimen tested under an anodic Econt, as determined by optical microscopy. The primary fracture surface of …
-
Electrochemical Study of Corrosion Behavior of Stellite 6 Alloy and 17-4PH Stainless Steel in Amine Solutions
… test methods such as potentiodynamic polarization, cyclic polarization, and EIS in this research. The microstructures of the tested materials and corroded surfaces are analyzed using SEM/EDX. Stellite 6 alloy and 17-4PH stainless steel are resistant to corrosion in amine solutions by …
-
A Rubric for Electrochemical Testing of Metallic Biomaterials
… and non-welded. Linear, potentiodynamic, and cyclic polarization curves were produced by the PARC 2273 potentiostat showing the corrosion tendencies of the metals in four unique solutions 3.5% NaCl, 0.35% NaCl, phosphate buffered saline solution (PBS), and Butterfield phosphate buffered …
-
Electrochemical studies of passive film formation and corrosion of friction stir processed nickel aluminum bronze
… and protects it from corrosion. In addition, cyclic polarization data was taken in order to study the stability of the films over a range of potentials. This data was then compared with SEM images to link the changes in the passive films with the changes in microstructure that occurred due to …
-
The effects of applied stress and sensitization on the passive film stability of AL-MG alloys
… and systematic manner. This study used cyclic polarization and electrochemical impedance spectroscopy to study passive film stability of AA5083-H116, and sought to understand how applied and residual tensile and compressive stresses impact the passive layer film and the materials …
-
The role of nitrogen in the localized corrosion resistance of cast duplex stainless steels
<p>The cyclic polarization pitting test (IN sulfuric acid with 0.5M NaCl) has been used to rank the relative pitting resistance of CF and CFM alloys as a function of alloy composition and heat treatment. The highest and most reproducible pitting potentials were determined for alloys that were …
-
Characterization of the corrosion of a P-130x graphite fiber reinforced 6063 aluminum metal matrix composite.
… corrosion, corrosion potential, galvanostaircase cyclic polarization and polarization resistance. Immersion tests showed accelerated corrosion at the exposed interfaces, with preferential attack at transverse fiber layers. Galvanic corrosion was large at low pH values, large graphite area …
-
Corrosion of Titanium and its alloys at high temperatures and pressures
… Long-term immersion (ASTM G31), potentiodynamic polarization (ASTM G5), cyclic polarization, and potentiostatic tests were administered to investigate and quantify the corrosion. XRD, SEM, XPS, and AES were used to characterize the uncorroded and corroded surfaces and the nature of the corrosion …
-
Laser modification for the increased lifetime of a commercial Stainless-Steel Alloys
… resistance and minimal defects, confirmed by cyclic polarization and electrochemical impedance spectroscopy (EIS). Finally, PEF trials integrated DoE, morphological analysis, metal ion release (via ICP-QMS), waveform capture (DAQ system), and impedance spectroscopy. Pulse waveform variations …
-
Corrosion behaviour of fly ash-reinforced aluminum-magnesium alloy A535 composites
… solution. The results of the potentiodynamic and cyclic polarization electrochemical tests showed that the corrosion potential (Ecorr) and pitting potential (Epit) of the alloy were more positive than those of the composites. The corrosion and pitting potentials of the composites became more …
-
Effect of Alloying with Palladium on the Corrosion Behavior of CoCr and NiCr Dental Alloys
… was monitored for 20 hrs followed by linear polarization and cyclic polarization tests. OCP at 20 hrs, polarization resistance (Rp), and corrosion current density (Icorr) were compared using Kruskal-Wallis and Mann-Whitney tests to determine whether differences existed between alloys and a …
-
Corrosion of steel bridge Girder anchor bolts
… its entire service life. Corrosion potential and cyclic polarization data confirmed that ASTM Type 304, Type 316, Type 2101, and Type 2205 were protected from concentration cell and localized corrosion in the simulated bearing environment. Therefore, it is recommended that the stainless steel …
-
Degradação eletroquímica de benzeno, tolueno e xileno via oxidação eletroquímica utilizando eletrodo Ti/Pt
… (benzene, toluene, ethylbenzene and xylene), polycyclic aromatic hydrocarbons (PAHs), phenols, carboxylic acids and inorganic compounds. There are several types of treatment methodologies that residue being studied, among which are the biological processes, advanced oxidation processes (AOPs), …
-
An investigation of the failure mechanisms of aluminum cathodes in zinc electrowinning cells
… in simulated and industrial electrolytes using cyclic polarization, potentiodynamic polarization, potentiostatic, galvanostatic, open circuit, and free immersion techniques. These techniques were coupled with electron metallography and chemical analysis of test solutions. The corrosion rate of …
Page 1 of 2