Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Cyclic Simple Shear"”.

  1. Cyclic simple shear behaviour of Cowden till

    … wind turbines (OWT) are subject to complex cyclic loads throughout their design life. This includes loads induced by the wind and waves as well as the turbine operation. The interaction of the structure and the soil on which the OWT is founded is fundamental in geotechnical design …

    oxford Repository record for Cyclic simple shear behaviour of Cowden till (opens in a new tab)

  2. Full-Scale Shake Table Cyclic Simple Shear Testing of Liquefiable Soil

    … of field-scale index testing before and after cyclic loading. Testing was performed at the Parson’s geotechnical and Earthquake Laboratory at Cal Poly San Luis Obispo on the 1-dimensional shake table with a mounted flexible walled testing apparatus. The testing apparatus, originally constructed …

    calpoly Repository record for Full-Scale Shake Table Cyclic Simple Shear Testing of Liquefiable Soil (opens in a new tab)

  3. Measuring Liquefied Residual Strength Using Full-Scale Shake Table Cyclic Simple Shear Tests

    This research consists of full-scale cyclic shake table tests to investigate liquefied residual strength of #2/16 Monterey Sand. A simple shear testing apparatus was mounted to a full-scale one-dimensional shake table to mimic a confined layer of saturated sand subjected to strong ground motions. …

    calpoly Repository record for Measuring Liquefied Residual Strength Using Full-Scale Shake Table Cyclic Simple Shear Tests (opens in a new tab)

  4. Simple shear compaction of basecourse aggregates

    … has been to develop a computer controlled cyclic simple shear apparatus and to investigate the repeated load behaviour of local basecourse aggregates with regard to their shear modulus and volume change properties. A detailed discussion of the construction of the apparatus and the …

    auckland-ms Repository record for Simple shear compaction of basecourse aggregates (opens in a new tab)

  5. Forward and inverse modeling of granular flows using differentiable graph neural network simulator

    … pressure response in liquefiable sands under cyclic loading. The pore pressure response in liquefiable sands is largely affected by the history of the cyclic shear stress. When the amplitude of cyclic shear stress is lower than the previous peak amplitude, excess pore pressure does not …

    texas Repository record for Forward and inverse modeling of granular flows using differentiable graph neural network simulator (opens in a new tab)

  6. Incremental effective stress liquefaction modelling of sands

    … the behaviour of a sand element to laboratory cyclic simple shear tests, and a dynamic model to compute the response of sand under harmonic or earthquake loading. For undrained cyclic loading, neither model incorporates strain softening response typical for loose sands, but have been calibrated …

    ubc Repository record for Incremental effective stress liquefaction modelling of sands (opens in a new tab) Download PDF for Incremental effective stress liquefaction modelling of sands (opens in a new tab)

  7. Effect of confining pressure and particle angularity on resistance to liquefaction

    … used. The investigations were performed under cyclic simple shear condition which closely simulates field stress conditions. Resistance to liquefaction is compared for angular and rounded sands over a range of relative densities and confining stresses. Confining stress of up to 2500 kPa were …

    ubc Repository record for Effect of confining pressure and particle angularity on resistance to liquefaction (opens in a new tab) Download PDF for Effect of confining pressure and particle angularity on resistance to liquefaction (opens in a new tab)

  8. Laboratory investigation into evaluation of sand liquefaction under transient loadings

    … Among the available element-level types of cyclic testing, cyclic simple shear (CSS) tests are the most popular and commonly used. The CSS tests provide a satisfactory simulation of seismic induced in-situ stresses. A testing program consisting of a series of multi-stage undrained direct …

    texas Repository record for Laboratory investigation into evaluation of sand liquefaction under transient loadings (opens in a new tab)

  9. Roles of pre- and post-liquefaction stages in dynamic system response of liquefiable sand retained by a sheet-pile wall

    … adequately model the pre- and post-liquefaction cyclic response of sands. The model is validated based on extensive cyclic simple shear tests and dynamic centrifuge tests from the LEAP-2020 project. A sensitivity analysis is then conducted by varying the base input motion intensity and duration. …

    ubc Repository record for Roles of pre- and post-liquefaction stages in dynamic system response of liquefiable sand retained by a sheet-pile wall (opens in a new tab) Download PDF for Roles of pre- and post-liquefaction stages in dynamic system response of liquefiable sand retained by a sheet-pile wall (opens in a new tab)

  10. Drained cyclic preshearing effects on the liquefaction resistance of sands

    … resistance of coarse-grained soils. Among these, shearing history has been shown to either decrease or increase liquefaction resistance. This past shearing – known as “preshearing” – is defined as the process of minor grain adjustments into a more stable configuration under external shear stress, …

    uiuc Repository record for Drained cyclic preshearing effects on the liquefaction resistance of sands (opens in a new tab)

  11. Factors Influencing the Post-Earthquake Shear Strength

    … have emphasized the need to study the cyclic and post-cyclic behavior of these materials. Moreover, if strength loss as a result of cyclic loading were to occur in the material comprising the dam and/or dam foundation, the consequences of failure could be substantial. The objective of …

    vt Repository record for Factors Influencing the Post-Earthquake Shear Strength (opens in a new tab)

  12. Mechanical model for the analysis of liquefaction of horizontal soil deposits

    … directions. The volume compaction tendency under cyclic loading causes the pore water pressure to rise, and the dissipation of excess pore water pressure (consolidation) decreases it. Recently, Martin, Finn and Seed (l975) studied the mechanics of pore water pressure generation of a soil sample …

    ubc Repository record for Mechanical model for the analysis of liquefaction of horizontal soil deposits (opens in a new tab) Download PDF for Mechanical model for the analysis of liquefaction of horizontal soil deposits (opens in a new tab)

  13. Slope effects on liquefaction potential and pore pressure generation in earthquake loading

    … study of slope effects and initial static shear stresses on liquefaction resistance is still in development. Furthermore, the literature regarding semi-empirical or Factor of Safety approach to liquefaction site analysis is complicated and presents contradictory results, which often leads …

    washington Repository record for Slope effects on liquefaction potential and pore pressure generation in earthquake loading (opens in a new tab)

  14. Commissioning of the multi-use static/dynamic large-scale soil testing table

    … specimens. It is set up to run both static and cyclic tests on large soil samples. The final design allows for performing shaking tests with a non-fixed top, static and dynamic simple shear tests, and direst shear tests with minimal changes to the table configuration. The table has separate …

    texas Repository record for Commissioning of the multi-use static/dynamic large-scale soil testing table (opens in a new tab)

  15. Modeling of strain rate effects on clay in simple shear

    … In the work presented here, the modified SIMPLE DSS model is expanded to account for the effects of strain rate on clays in simple shear conditions. The response of clay soils is highly dependent on the rate of strain for both effective stress path and stress-strain behavior. The undrained …

    tamu Repository record for Modeling of strain rate effects on clay in simple shear (opens in a new tab)

  16. Evolutionary Intensity Measures for More Accurate and Informative Evaluation of Liquefaction Triggering

    … the timing-based framework. This study used both cyclic simple shear and centrifuge testing to systematically investigate the response of liquefiable soils to fully transient earthquake loading histories. The results of these tests were used to evaluate the efficiency of evolutionary intensity …

    washington Repository record for Evolutionary Intensity Measures for More Accurate and Informative Evaluation of Liquefaction Triggering (opens in a new tab)

  17. Effects of particle size distribution and particle shape on cyclic liquefaction response of granular materials

    Cyclic liquefaction of granular soils is influenced by particle-level parameters such as particle size distribution and particle shape. These parameters are difficult to isolate in real soils, whereas use of Discrete element method (DEM) can be an important step to resolve this problem. It can also …

    ubc Repository record for Effects of particle size distribution and particle shape on cyclic liquefaction response of granular materials (opens in a new tab) Download PDF for Effects of particle size distribution and particle shape on cyclic liquefaction response of granular materials (opens in a new tab)

  18. A practical model for load-unload-reload cycles on sand

    … contractive behaviour when unloaded. Undrained cyclic simple shear tests show that the increase in pore water pressure generated during the unloading cycle often exceeds that generated during loading. The tendency to contract upon unloading is important in engineering practice as an increase in …

    ubc Repository record for A practical model for load-unload-reload cycles on sand (opens in a new tab) Download PDF for A practical model for load-unload-reload cycles on sand (opens in a new tab)

  19. Application of Fatigue Theories to Seismic Compression Estimation and the Evaluation of Liquefaction Potential

    … is the accrual of volumetric strains caused by cyclic loading, and presented herein is a "non-simplified" model to estimate seismic compression. The proposed model is based on a modified version of the Richart-Newmark non-linear cumulative damage hypothesis, and was calibrated from the results …

    vt Repository record for Application of Fatigue Theories to Seismic Compression Estimation and the Evaluation of Liquefaction Potential (opens in a new tab)

  20. Multi-scale modeling of cyclic shearing and liquefaction response of granular materials

    Cyclic shearing of granular materials under undrained conditions can induce a reduction of mean effective stress and increase of the pore water pressure. In extreme cases, the mean effective stress can temporarily vanish and lead to a “semifluidized state", in which large shear strains are …

    ubc Repository record for Multi-scale modeling of cyclic shearing and liquefaction response of granular materials (opens in a new tab) Download PDF for Multi-scale modeling of cyclic shearing and liquefaction response of granular materials (opens in a new tab)

Page 1 of 2