Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 83 for “"Cyclic compression"”.

  1. Monotonic and Cyclic Compression Behavior of Bulk Metallic Glasses

    <p>The cyclic-compression behavior of a Cu45Zr45Al5Ag5 bulk metallic glass (BMG) was investigated in order to elucidate the damage initiation and growth mechanisms. The present Cu45Zr45Al5Ag5 BMG was found to have the highest fatigue-endurance limit for BMGs reported to date. Fracture under cyclic …

    utk-theses Repository record for Monotonic and Cyclic Compression Behavior of Bulk Metallic Glasses (opens in a new tab)

  2. Viscoelastic response and deformation mechanics of polymeric foams under cyclic compression

    … structural components, yet their response to cyclic compressive loading remains poorly understood. This study investigates the viscoelastic behavior and fatigue mechanisms of polyurethane and silicone foams under intermediate strain-rate cyclic compression using a combination of advanced …

    colo-mines Repository record for Viscoelastic response and deformation mechanics of polymeric foams under cyclic compression (opens in a new tab)

  3. Fatigue Damage Prognosis of Internal Delamination in Composite Plates Under Cyclic Compression Loadings Using Affine Arithmetic as Uncertainty Propagation Tool

    … life prognosis of composite plants subjected to cyclic compressive loadings. When loadings are compressive in nature, the composite plates undergo repeated buckling-unloading of the delaminated layer which induces mixed modes I and II states of stress at the tip of the delamination in the plates. …

    embry-riddle Repository record for Fatigue Damage Prognosis of Internal Delamination in Composite Plates Under Cyclic Compression Loadings Using Affine Arithmetic as Uncertainty Propagation Tool (opens in a new tab)

  4. Control release from biopolymers

    … microstructure of the gel. After conducting the compression tests, a number of parameters were investigated and the consist of the effect of the gellan concentration, salt concentration and cyclic compression on the mechanical properties of the gel. According to the results, mechanical properties …

    birmingham Download PDF for Control release from biopolymers (opens in a new tab)

  5. Cartilage Biomechanical and Mechanobiological Response to Sliding Contact

    … migrating contact area compared to uniaxial cyclic compression. Interstitial fluid pressure was maintained high under sliding contact while it reduced by 20% in cyclic compression model. Also, maximum fluid flow was reduced by 44% in uniaxial cyclic compression where fluid imbibition was …

    carleton Repository record for Cartilage Biomechanical and Mechanobiological Response to Sliding Contact (opens in a new tab)

  6. Effects of precipitate size and surface normal orientation on micro-identification and compressive fatigue of NiTi shape memory alloys

    … Through instrumented sharp microindentation and cyclic compression testing, the varying mechanical response of the NITI materials given different aging treatments was determined. Small precipitate sizes were found to strongly resist dislocation motion and the martensitic transformation. …

    nps Repository record for Effects of precipitate size and surface normal orientation on micro-identification and compressive fatigue of NiTi shape memory alloys (opens in a new tab)

  7. Characterization of osteocyte differentiation and mechanobiology in a newly established three-dimensional biomimetic platform

    … was established that combines perfusion and cyclic compression to mimic physiological fluid flow shear stress and substrate strain. LTMC-, decellularized bone-, and β-TCP-scaffolds were seeded with IDG-SW3 cells. Under perfusion (1.7 ml/min, 21 days), LTMC supported high viability, …

    wurz-thes Repository record for Characterization of osteocyte differentiation and mechanobiology in a newly established three-dimensional biomimetic platform (opens in a new tab)

  8. THE USE OF MECHANOTHERAPY TO PROMOTE THE RECOVERY FROM DISUSE ATROPHY IN AGING RAT SKELETAL MUSCLE

    … responds to mechanical loads, as high loads of cyclic compression preferentially damage aged (30 month) but not adult rat (10 month) gastrocnemius muscle recovering form disuse atrophy. We show that lower loads of cyclic compression serve as a mechanotherapy for skeletal muscle ECM remodeling in …

    uky-thes Repository record for THE USE OF MECHANOTHERAPY TO PROMOTE THE RECOVERY FROM DISUSE ATROPHY IN AGING RAT SKELETAL MUSCLE (opens in a new tab)

  9. A rheology model of soft elastomeric capacitor for Weigh-in-motion application

    … multi step relaxation, simple relaxation and cyclic compression. Specimens with varying stiffness are employed for these tests.. Numerical simulations for the cyclic compression loading are presented to assess the model performance. The model is found to be capable of reproducing the …

    iastate Repository record for A rheology model of soft elastomeric capacitor for Weigh-in-motion application (opens in a new tab)

  10. The Effect of Mechanical Stimulation on Osteogenesis of Cell Seeded Collagen Microspheres

    … collagen microspheres were subjected to two cyclic compression regimes and cell viability, alkaline phosphatase (ALP) activity and mineralisation of differentiated cells were assessed over 28 days experiment. It has been shown that cyclic compression of very low cell number seeded on soft …

    whiterose Download PDF for The Effect of Mechanical Stimulation on Osteogenesis of Cell Seeded Collagen Microspheres (opens in a new tab)

  11. Neural network-based material modeling

    … in biaxial stress states and in uniaxial cyclic compression. A composite material model simulating the stress-strain behavior of reinforced concrete as a generic composite material in a biaxial stress state is built with experimental data from Vecchio and Collins' tests on reinforced …

    uiuc Repository record for Neural network-based material modeling (opens in a new tab)

  12. Evaluation of the relationship between lacunar wall strain and osteocyte β-catenin signaling pathway activation using finite element methods and confocal fluorescence imaging.

    … unknown. It has been observed that following cyclic compression loading, osteocytes in murine cortical bone have heterogeneous levels of Wnt/β-catenin signaling. This led us to investigate whether the heterogeneity of bone strain at the lacunocanalicular walls might directly affect the level …

    umkc Repository record for Evaluation of the relationship between lacunar wall strain and osteocyte β-catenin signaling pathway activation using finite element methods and confocal fluorescence imaging. (opens in a new tab)

  13. Native Cellulose Nanofibril-based Functional Materials

    … nanotube hybrid aerogels under repeated cyclic compression to explore "electrical fatigue". The hybrid aerogels can be constructed to allow stable reversible resistance changes in cyclic compression. Publication IV describes a nanocellulose film actuation with reversible bidirectional …

    aalto Repository record for Native Cellulose Nanofibril-based Functional Materials (opens in a new tab)

  14. Micro-macro modeling of chemo-mechanical damage and healing in rocks

    … in salt rock. Consolidation tests and cyclic compression tests were conducted by our collaborators at Texas A&M University. Samples were taken out and sliced for microstructure observation at key stages of the loading paths. Based on statistical image analysis, the evolution of …

    gatech Repository record for Micro-macro modeling of chemo-mechanical damage and healing in rocks (opens in a new tab)

  15. An investigation of the rheology and indentation response of vegetable shortening using finite element analysis

    … vegetable shortening were obtained from uniaxial compression tests, including monotonic and cyclic compression, as well as creep and stress relaxation tests. The fundamental parameters obtained from the various compression tests were then used in two mechanical models (viscoelastic and …

    manitoba Repository record for An investigation of the rheology and indentation response of vegetable shortening using finite element analysis (opens in a new tab)

  16. Design and Development of a Resonance Ignition System Using Gaseous Propellants

    … Hartmann–Sprenger tube (HST), generating cyclic compression and expansion waves that rapidly heat gas near the tube endwall. A modular experimental system was designed and built to investigate resonance ignition using methane–air and methane–oxygen mixtures. The system includes a …

    calpoly Repository record for Design and Development of a Resonance Ignition System Using Gaseous Propellants (opens in a new tab)

  17. Development of energy absorption structures based on carbon nanofiber foams and shear thickening fluids

    … core-shell composites were determined through cyclic compression and hardness measurements/impact tests, respectively. It was found that the CNFF/commercial frameworks combination generated structures that were too brittle for the desired application. However, the combination of CNFF-STF …

    nps Repository record for Development of energy absorption structures based on carbon nanofiber foams and shear thickening fluids (opens in a new tab)

  18. Design and Frequency Characterization of Dual-Piezoresponsive Foam Sensors

    … with increased strain in both static and cyclic compression environments. The quasi-piezoelectric voltage response of nanocomposite foam sensors increases linearly with compression frequency. A circuit and signal demodulation system was developed enabling simultaneous capture of a …

    byu Repository record for Design and Frequency Characterization of Dual-Piezoresponsive Foam Sensors (opens in a new tab) Download PDF for Design and Frequency Characterization of Dual-Piezoresponsive Foam Sensors (opens in a new tab)

Page 1 of 5