Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Cyclical loading"”.

  1. Untersuchungen zur Biomechanik unterschiedlicher Beugesehnennahtmaterialien und -methoden

    … repaired tendons were subjected to linear and cyclical loads. No difference in maximum tensile strength after linear and cyclical force could be detected between the knotted polydioxane suture and the knotless barbed suture. On linear force tests an additional circumferential repair increased …

    wurz-thes Repository record for Untersuchungen zur Biomechanik unterschiedlicher Beugesehnennahtmaterialien und -methoden (opens in a new tab)

  2. Performance of concrete beams and slabs reinforced with FRP grids

    … of FRP reinforced concrete beams subjected to cyclical loading was shown to be comparable with the behavior of steel reinforced concrete beams.The tests on FRP reinforced concrete bridge deck slabs showed that FRP reinforced slabs can be designed to satisfy AASHTO load and servicability …

    unh-thes Repository record for Performance of concrete beams and slabs reinforced with FRP grids (opens in a new tab)

  3. Magnetically actuated peel test for thin film interfacial fracture and fatigue characterization

    … investigating fatigue crack propagation under cyclical loading. A fixtureless and noncontact experimental test technique is thus proposed and implemented to study interfacial fracture for thin film systems. The proposed test incorporates permanent magnets surface mounted onto micro-fabricated …

    gatech Repository record for Magnetically actuated peel test for thin film interfacial fracture and fatigue characterization (opens in a new tab)

  4. Medial longitudinal arch mechanics before and after a prolonged run

    … arch of the foot may have adapted to the cyclical loading of the run by recruiting other muscles, or the arch may be resilient to change after a non-exhausting run. Greater arch deformation during running was likely a function of increased plantarflexion moment and ground reaction forces …

    iastate Repository record for Medial longitudinal arch mechanics before and after a prolonged run (opens in a new tab)

  5. The Mechanical Design and Analysis of an Active Prosthetic Knee

    … design, can be further improved to allow greater loading capabilities. Moreover, cyclical loading and total life cycles would also be significantly improved. A modular test stand is also designed and prototyped to allow APK testing. Since the APK prototype cannot be immediately placed on a human …

    waterloo Repository record for The Mechanical Design and Analysis of an Active Prosthetic Knee (opens in a new tab)

  6. Dissecting the role of MukF in the chromosome organisation by Escherichia coli MukBEF

    … has been proposed to topologically entrap DNA. Cyclical loading and unloading of DNA is regulated by ATP binding and hydrolysis, both of which are essential for SMC function. The kleisin MukF stimulates MukB ATPase activity. Uniquely, MukF forms stable dimers through the N-terminal Winged Helix …

    oxford Repository record for Dissecting the role of MukF in the chromosome organisation by Escherichia coli MukBEF (opens in a new tab)

  7. Development of Capacitive Wearable Sensors for Limb Volume Measurement Towards Swelling Management

    … performance under high elongation conditions and cyclical loading environments (Chapter 5). A novel limb volume phantom model (LVPM) incorporating pneumatic artificial muscle technology was developed for comprehensive sensor calibration and validation procedures, enabling precise assessment of …

    waterloo Repository record for Development of Capacitive Wearable Sensors for Limb Volume Measurement Towards Swelling Management (opens in a new tab)

  8. Normal-strength and high-strength concrete columns under cyclic axial load and biaxial moment

    … The lateral load was applied monotonically and cyclically. To predict the behavior of concrete columns under monotonic and cyclic compressive loadings, a computer code was developed to produce the moment-curvature diagram for concrete sections. The moment-curvature diagram was then input in …

    njit Repository record for Normal-strength and high-strength concrete columns under cyclic axial load and biaxial moment (opens in a new tab)

  9. Mechanical Characterization of Carbon Fiber and Thermoplastic Ankle Foot Orthoses

    … designs and materials were tested under cyclical loading to characterize their mechanical properties. These AFOs were fitted about a surrogate limb and underwent pseudo-static compressive testing using a materials testing system and motion analysis. Acquired data included: compressive …

    marquette Repository record for Mechanical Characterization of Carbon Fiber and Thermoplastic Ankle Foot Orthoses (opens in a new tab)

  10. Stress and fatigue analysis of pressurised vessel-nozzle intersections with and without local wall thinning

    … analysis of damaged intersections subject to cyclical loading. In the first part of the study, a finite element analysis (FEA) is carried out for the common sphere-nozzle and cylinder-nozzle intersections, to determine the stress concentration factor (SCF). Axi-symmetric (2D) and 3D elements, …

    ottawa-retro Repository record for Stress and fatigue analysis of pressurised vessel-nozzle intersections with and without local wall thinning (opens in a new tab)

  11. The Investigation of Transverse Joints and Grouts on Full Depth Concrete Bridge Deck Panels

    … joints were designed and tested in cyclical loading. Each joint was tested on a full scale two girder setup in negative bending with a simulated HS-20 vehicle. The blockouts were built as hollow concrete rings filled with grout and left to shrink under ambient conditions. Thirteen …

    vt Repository record for The Investigation of Transverse Joints and Grouts on Full Depth Concrete Bridge Deck Panels (opens in a new tab)

  12. Mechanical and biological aspects of impaction bone grafting in revision hip surgery and the use of a new synthetic bone graft

    … Outcome measures of subsidence, micromotion on cyclical loading and histomorphometry were performed. RESULTS: Phase 1 - Fresh frozen human bone-graft behaves in a similar fashion to theoretical predictions based on Engineering principles. These principles follow Soil Mechanics theory and are …

    edinburgh Repository record for Mechanical and biological aspects of impaction bone grafting in revision hip surgery and the use of a new synthetic bone graft (opens in a new tab)

  13. Mechanical and biological augmentation of allograft and synthetic graft in impaction bone grafting

    … mechanical stability of the prosthesis under cyclical loading,<br/>demonstrated by a reduction in stem subsidence.<br/><br/>Conclusions:<br/><br/>• HBMSC when combined with either allograft or synthetic graft (PDLLA) can<br/>survive the forces of a standard IBG and under osteogenic conditions, …

    soton Download PDF for Mechanical and biological augmentation of allograft and synthetic graft in impaction bone grafting (opens in a new tab)

  14. Periprosthetic Fracture after Total Hip Arthroplasty: Treatment and Outcomes

    … were tested under compression compression cyclical loading up to 10,000 cycles at 1 Hz with maximum and minimum loads of 2.2kN and 0.2kN respectively. At the end of 10,000 cycles the average displacement of the fracture gap was the largest for SuperCable fixation, while it was the least for …

    anu Repository record for Periprosthetic Fracture after Total Hip Arthroplasty: Treatment and Outcomes (opens in a new tab)