Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"Cylindrical cell"”.
-
Characterisation of a 4680 Cylindrical Cell: Insights Into Cell Design and Performance
… crucial. These batteries come in various forms: cylindrical, pouch, and prismatic, each with its own set of pros and cons in terms of manufacturing, packaging, energy and power. Recently, there has been a proposal for cylindrical cells of the 46xx series, which allows increased capacity, …
-
Solutions of Equations for the Regulation of Kinase Activity in a Finite Cylindrical Cell
In this work, inspired by the reality in organisms and particularly the shape of axon of the neuron, new mathematical models of regulation of kinase activity are presented. In the view of mathematician, those models are diffusion equations defined in finite cylinders but with mixed Robin boundary …
-
Finite element solution of the nonlinear coupled neutronic-energy equations for a fast reactor fuel cell.
… postulated overpower transient. An equivalent cylindrical cell is used to model the fuel subassembly. The governing neutronic and heat transport equations for each region (fuel, clad, and coolant) of the equivalent cylindrical cell are developed. Nuclear Doppler broadening feedback is included …
-
Molecular understanding of cell morphogenesis and cytokinesis in the fission yeast schizosaccharomyces pombe
The fission yeast Schizosaccharomyces pombe cell grows in a polarized manner by tip elongation and divides by fission to generate two daughter cells of equal size. In recent years, many mutants defective in polarized growth and cell division have been isolated; however, the underlying molecular …
-
Hot alkaline treatment to stimulate and consolidate the heavy oil Bachaquero-01 sand
… was placed in a vertical 18 in. long aluminum cylindrical cell with an ID of 1.5 in. The top half of the cell was thermally insulated and the bottom half was cooled. The alkaline treatment (pH 11 -12) at 230ºC - 250ºC and 900 1000 psig was injected at 20 ml/min for 3 to 6 hours at the top of …
-
ACTIVE CONTROL OF NON-RECIPROCAL ACOUSTIC METAMATERIAL WITH A DYNAMIC CONTROLLER
… experimental evidence. Our setup consists of a cylindrical cell made up of acrylic, filled with water, having four piezo sensors/actuators, two on each end. The idea is to excite the piezo cell through an actuator on one side, collect the resulting signal from the piezo sensor on the other side, …
-
The effect of testing conditions on lost circulation materials' performance in simulated fractures
… evaluation methods.</p><p>In this study, a steel cylindrical cell was used to simulate downhole high-pressure conditions. Steel discs with precisely sized slots (simulating wellbore fractures) were used to study the effect of testing conditions on the particulate LCM sealing performance. Results …
-
Thermal Modelling of Battery Characterization Techniques
… for the project was to record the heat from a cylindrical cell with high accuracy. Peltier elements were used to record the heat flow of the samples’ cubical enclosure, each side with a heat sink to maintain a stable cold-side reference. The initial testing proved unstable and problematic to …
-
Fabrication and Characterization of Graphene based 2D Materials for Supercapacitors
… M K2SO4 as the aqueous electrolyte. The button cell EDL capacitor performance was further improved up to 50% using 1 M Na2SO4 aqueous electrolyte (15.2 F/g at a current density of 1 A/g) in comparison to using 0.5 M Na2SO4 aqueous electrolyte (4 F/g at a current density of 1 A/g). Pouch cell …
-
MECHANICAL ABUSE MODELING OF LITHIUM-ION BATTERIES WITH ELECTROCHEMICAL COUPLING
… predict the coupled multi-physics behavior of a cell in a real-world application is desired. This investigation incorporates detailed and homogenized multi-physics modeling of various form factors of lithium-ion batteries. In the first two chapters of this thesis, a multi-physics homogenized …
-
Towards long term colloid suspension in a vertically rotated system.
… solid surface in a fluid medium confined in a cylindrical cell (3.0 mm diameter, 0.25 mm height) which was rotated vertically at a low rotational speed (20 rpm). The observed colloidal behavior was then validated through a Stokesian dynamics simulation where the concept of hydrodynamic contact …
-
Development of an Internal Camera-Based Volume Determination System for Triaxial Testing
… located within the triaxial testing cell was developed and validated. By placing the instrumentation inside of the cell, instead of the instrumentation being located outside of the cell, the technique eliminated cumbersome corrections required to account for optical distortions due to …
-
Realistic Modelling of Li-ion Batteries for Calculating High Frequency Impedance
… solver setup for a Lithium-ion (Li-ion) battery cell to study the High-Frequency (HF) behavior. Although this study primarily focuses on the impedance characteristics of battery cells, it also investigates their multidisciplinary behavior, including electromagnetic, thermal, and structural …
-
A tool for analyzing the evolution of non-uniformities in lithium-ion cylindrical battery cells at the module level under various operating conditions
… coupled electrical and lumped thermal model for cylindrical lithium-ion batteries along with a finite difference thermal model for spatial temperature prediction of cylindrical cell These models address key challenges in simulating real-world battery behavior. The electrical model utilizes a 2 …
-
A novel high-speed AC impedance method for monitoring transient cavitation
… was generated inside a suitable electrochemical cell using a variety of sound sources. The different acoustic environments were chosen so that different types of bubble activity could be investigated.<br/>Initial investigations were carried out inside a cylindrical resonance chamber, chosen for …
-
Impedance-based battery temperature monitoring
… for temperature estimation, whereby the internal cell temperature is directly inferred from online electrochemical impedance spectroscopy (EIS) measurements at a single frequency. Previously, ITD was used to infer the volume-average cell temperature; the present work focuses on extending ITD to …
-
Ductile Fracture under Combined Tension and Shear: Theory and Applications
… to this end. Experimental observations reveal cell-level plastic deformation as homogeneous or inhomogeneous, the latter being idealized with plasticity confined within intervoid ligaments or occasionally within intervoid plugs. The present thesis is partly targeted to the development of …
-
Developing parametrisation methods for physics-based models of lithium and sodium-ion batteries
… methodologies for parameterizing different cell formats and chemistries. Physics-based models have significant potential within industry, from optimising fast charging and battery manufacturing, but the main obstacle for widespread adoption is obtaining the parameters. Numerous parameters …
-
Fluctuations, Phase Separation and Wetting Films near Liquid-Gas Critical Point
… a defocused grid method. The specially designed cell containing the pure fluid was heated and, as a result, a low contrast line appeared on the wetting film that corresponded to a sharp change in the thickness of the film. A large mechanical response was observed in response to the cell heating …
-
Characterisation and modelling of potassium-ion batteries
… viable potassium-ion (K-ion) electrolyte, a full-cell KIB rate model in commercial cell format is required to determine the fast-charging potential for KIBs and facilitate K-ion electrolyte and materials development. However, accurate characterisation of the fundamental electrolyte and material …
Page 1 of 2