Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"DC-capacitor"”.

  1. DC capacitor voltage balancing in multi-level converters

    … and three-level diode clamped converter (DCC). Despite their appealing harmonic spectrum and low losses, multi-level converters are known to suffer from inherent voltage imbalance on their dc side. The thesis presents a method in order to balance the dc side capacitor voltages for an …

    manitoba Repository record for DC capacitor voltage balancing in multi-level converters (opens in a new tab)

  2. DC capacitor minimization of single phase power conversion and applications

    … an H-bridge inverter with a large electrolytic DC capacitor to absorb the ripple power pulsating at twice the line frequency (2ω ripple power). In order to reduce the capacitor size and to achieve high power density, a single phase DC-capacitor-less inverter with SVPWM control is proposed. The …

    msu Repository record for DC capacitor minimization of single phase power conversion and applications (opens in a new tab)

  3. Theoretical analysis and reduction techniques of DC capacitor ripples and requirements in inverters

    DC link capacitor is an important component for many conventional topologies, such as three-phase voltage source inverter (VSI), H-bridge VSI and etc. Minimization of the dc capacitor is an essential step towards developing and manufacturing compact low-cost inverter systems for high temperature …

    msu Repository record for Theoretical analysis and reduction techniques of DC capacitor ripples and requirements in inverters (opens in a new tab)

  4. Minimizing dc capacitor current ripple and dc capacitance requirement of the HEV converter/inverter systems

    Minimization of the dc capacitor is an essential step towards developing and manufacturing compact low-cost hybrid electric vehicle (HEV) converter/inverter systems for high temperature operation, long life and high reliability. Traditionally, the dc capacitance has been determined according to …

    msu Repository record for Minimizing dc capacitor current ripple and dc capacitance requirement of the HEV converter/inverter systems (opens in a new tab)

  5. Design and Control of a 100 kW SiC-Based Six-Phase Traction Inverter for Electric Vehicle Applications

    … is the most promising topology, offering reduced DC-capacitor requirements, lower cabling cost, and higher fault tolerance capability while maintaining the same efficiency and power device count of a three-phase VSI. The feasibility of the SiC-based six-phase inverter is further investigated at …

    mcmaster Repository record for Design and Control of a 100 kW SiC-Based Six-Phase Traction Inverter for Electric Vehicle Applications (opens in a new tab)

  6. Space Vector Modulation of Multi-level and Multi-module Converters for High Power Applications

    … for (i) a multi-level Diode-Clamped Converter (DCC) and (ii) a multi-module Voltage-Sourced Converter (VSC) system in which each module is a conventional two-level VSC. Although the SVM strategies are general and applicable for n-level DCC and n-module VSC systems, this text only concentrates on …

    toronto-retro Repository record for Space Vector Modulation of Multi-level and Multi-module Converters for High Power Applications (opens in a new tab)

  7. Topologies and Modulation Methods for Five-Level Active-Neutral-Point-Clamped Inverters

    DC to AC power conversion is a key technology in the modern set-up of generation, transmission, distribution and utilization of electric power. Among the various schemes of prevalent inverters, the multi-level inverters have been innovated as necessary cost-benefit DC to AC devices with a wide …

    queens Repository record for Topologies and Modulation Methods for Five-Level Active-Neutral-Point-Clamped Inverters (opens in a new tab)

  8. Microcontroller-based power regulation for induction motors with power quality conditioning

    … a digital controller. This conditioner uses a DC capacitor and inverter to produce harmonic-compensating signals, and connects to the AC source via a link reactor. The model was combined with a model of the motor controller and the complete system was simulated. Results show a successful …

    wvu Repository record for Microcontroller-based power regulation for induction motors with power quality conditioning (opens in a new tab)

  9. The Modeling and Control of a Cascaded-Multilevel Converter-Based STATCOM

    … the literature reviews, the CMC with separated DC capacitors is clearly the most feasible topology for use as a power converter in the STATCOM applications. The controls for the CMC-based STATCOM were, however, very complicated. The intricate control design was begun without well-defined system …

    vt Repository record for The Modeling and Control of a Cascaded-Multilevel Converter-Based STATCOM (opens in a new tab)

  10. Modeling and Simulation of Parallel D-STATCOMs with Full-Wave Rectifiers

    … power flow control techniques such as capacitor banks and tap-changing transformers are incapable of adequately handling the rapid fluctuations in power supply and demand that today’s grid experiences. Flexible AC Transmission System (FACTS) controllers are a practical way to compensate …

    calpoly Repository record for Modeling and Simulation of Parallel D-STATCOMs with Full-Wave Rectifiers (opens in a new tab)

  11. Operation of a single-phase grid connected inverter with large DC bus voltage ripple for distributed generation

    … is relatively low due to the large electrolytic capacitors required at the dc bus for attenuating the 2 nd order voltage ripple. This Thesis discusses a control scheme suitable for the VSI operating with large dc bus ripple, when a small and high reliability thin film capacitor can be used. It is …

    concordia Download PDF for Operation of a single-phase grid connected inverter with large DC bus voltage ripple for distributed generation (opens in a new tab)

  12. Wind power stability enhancement by providing optimized power quality analysis, short circuit ratio estimation and energy storage based frequency response

    … using simulation data available from PSCAD/EMTDC software and real time data available from a commercial wind farm. The method is also compared with already available solutions to ensure better performance. Finally, a new method is shown to provide frequency response from Doubly Fed Induction …

    ttu Repository record for Wind power stability enhancement by providing optimized power quality analysis, short circuit ratio estimation and energy storage based frequency response (opens in a new tab)

  13. Designing and developing nine-level Packed U-Cell (PUC9) inverter for high power applications

    … industry-oriented converter, which balances the dc capacitor level as desired, increasing the efficiency of PUC9 inverter, and designing an inverter compatible with adding series inverter together to decrease complexity. In order to achieve the above mentioned research objectives; first, I do …

    ets-quebec Download PDF for Designing and developing nine-level Packed U-Cell (PUC9) inverter for high power applications (opens in a new tab)

  14. Primary Side Compensated Wireless Power Transfer System for Low Gap Application

    … rely on loosely coupled coils and compensation capacitors, which increase cost. To address this challenge, this thesis investigates primary-side-compensated (PSC) WPT as an alternative to conventional double-side-compensated (DSC) topologies, with particular emphasis on low-gap, medium-power …

    queens Repository record for Primary Side Compensated Wireless Power Transfer System for Low Gap Application (opens in a new tab)

  15. Realization of a High Power Microgrid Based on Voltage Source Converters

    … through power electronics interfaces, such as ac-dc, dc-dc, and dc-ac converters. The converter design and control are critical to the stability and efficiency of a microgrid. A microgrid may operate in either gird connected mode or islanded mode [1]. In terms of stability, the grid connected mode …

    arkansas Repository record for Realization of a High Power Microgrid Based on Voltage Source Converters (opens in a new tab)

  16. Design, Analysis and Experimental Evaluation of a Virtual Synchronous Machine Based Control Scheme for STATCOM Applications

    … and the actual inertia is established and the dc capacitor sizing is discussed in a possibly more economical way. The start-up process of a VSM-based STATCOM is presented to implement a practical prototype as well.

    vt Repository record for Design, Analysis and Experimental Evaluation of a Virtual Synchronous Machine Based Control Scheme for STATCOM Applications (opens in a new tab)

  17. Cascaded multilevel inverter and its facts applications

    … active and reactive power flow in the line; 2) dc capacitor voltage balance control for H-bridges of both series and shunt CMIs; 3) modulation of the CMI for low total harmonic distortion (THD) of output voltage and low switching loss; 4) fast system dynamic response. The UPFC functionality with …

    msu Repository record for Cascaded multilevel inverter and its facts applications (opens in a new tab)

  18. The dynamic analysis and control of a self-excited induction generator driven by a wind turbine

    … of an isolated induction generator excited by AC capacitors starts from charge in the capacitors or from a remnant magnetic field in the core. A similar voltage build up is obtained when the isolated induction generator is excited using an inverter/rectifier system with a single DC capacitor on …

    unsw Repository record for The dynamic analysis and control of a self-excited induction generator driven by a wind turbine (opens in a new tab)

  19. Topologies and control estrategies of multiport modular multinivel converters

    … como Sistemas de Alta Tensión en Continua (HVDC), Sistemas de transmisión flexible en AC (FACTS) y Transformadores de Estado Sólido (SST), tienen el potencial para lidiar con estos desafíos. Los convertidores multinivel son adecuados para el rango de media-alta tensión y media-alta potencia, …

    oviedo Repository record for Topologies and control estrategies of multiport modular multinivel converters (opens in a new tab)