Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 85 for “"DC-link Capacitor"”.
-
Condition Monitoring of DC-Link Capacitor in Traction Inverters
… poses additional challenge for reliability. The DC-link capacitor which links the power source, typically a battery, with the load - an electric machine, performs a critical function of reducing the voltage and current ripple induced mainly by the switching action of IGBTs in inverter module. …
-
A Brushless DC Motor Drive Without a DC Link Capacitor
… context of industrial motor drives, Brushless DC (BLDC) and Permanent Magnet Synchronous (PMS) motors have become popular as energy efficient and reliable alternatives for induction motors. Both BLDC and permanent magnet synchronous motors are electronically commutated based on the position of …
-
CONTROL OF PERMANENT MAGNET SYNCHRONOUS MACHINES WITH SMALL DC-LINK CAPACITOR
… machine (PMSM) drive systems with small dc-link capacitor. In small dc-link capacitor-based PMSM drive systems, the dc-link voltage is subject to fluctuations, and thus, real-time accurate dc-link voltage information is critical. This thesis firstly analyses the challenges posed by …
-
NEUTRAL-POINT-LESS MULTILEVEL INVERTER WITH A SINGLE DC-LINK CAPACITOR
Thesis (Ph.D.)--Michigan State University. Electrical Engineering - Doctor of Philosophy, 2025
-
Analysis and reduction of dc-link capacitor voltage/current stress in three-level PWM converters
… systems. This Thesis focuses on the converter dc-link capacitor (bank), which is a costly component and a common source of failures. The Thesis is divided into two parts.<br/><br/>The first part examines the voltage and current stress induced on dc-link capacitors by the three most common …
-
A MAXIMUM POWER POINT TRACKING TECHNIQUE FOR SINGLE-PHASE PHOTOVOLTAIC SYSTEMS WITH REDUCED DC-LINK CAPACITOR
Electrolytic capacitors used in photovoltaic (PV) power conditioning units (PCU) for power decoupling purposes are less reliable in nature. Film capacitors can be adopted instead of electrolytic capacitors if the energy storage requirement of the PCU is reduced, since they offer better reliability …
-
Back to Back Active Power Filter for Multi-Generator Power Architecture with Reduced dc-link Capacitor
… dependency is improved. The number of required dc-link capacitors is reduced by half by introducing a back to back configuration and the capacitor size is reduced by adjusting the phase angle difference of genset to cancel out the most significant voltage harmonics in the shared dc-link bus. The …
-
Modeling and Improvement of DC-link Capacitor Lifetime in a Regenerative Cascaded H-bridge Motor Drive
… of a regenerative motor drive power cell is dc-link capacitors. They create suitable dc-link voltages and smooth the voltage waveforms. Reliability, or lifetime of dc-link capacitors highly affect power cell lifetime, and power loss in dc-link capacitor is also another issue that worth …
-
A multi-featured single-phase utility interface with reduced DC link capacitor for distributed power sources
… the low order voltage harmonics present in the dc bus of the interface. (2) The design of fast and robust single phase phase-locked loop for the synchronization of the power interface. (3) A new control circuit for a three-level hysteresis current controller. Finally, a digital signal processor …
-
New leading/trailing edge modulation strategies for two-stage AC/DC PFC adapters to reduce DC-link capacitor ripple current
AC/DC adapters mostly employ two-stage topology: Power Factor Correction (PFC) pre-regulation stage followed by an isolated DC/DC converter stage. Low power AC/DC adapters require a small size to be competitive. Among their components, the bulk DC-link capacitor is one of the largest because it …
-
A Virtual Space Vectors based Model Predictive Control for Three-Level Converters
… of a term dedicated specifically to control the dc-link capacitor voltages such that the neutral-point voltage (NP-V) oscillations are minimized, must be designed. Nevertheless, selecting proper weighting factors for the multiple control objectives is difficult and time consuming. Additionally, …
-
SiC converter for electrical vehicle - DC-link ripple
… in drivetrains. In most of these inverters, the DC-link capacitor makes up a large portion of the total inverter volume and weight. It is therefore interesting to analyze the DC-link current and voltage ripple which is one of the major dimensioning factors of the DC-link capacitor. Throughout …
-
MULTIPHASE POWER ELECTRONIC CONVERTERS FOR ELECTRIC VEHICLE MACHINE DRIVE SYSTEMS
… investigations and experimental validation. DC-link capacitor and heat sink are two bulkiest components in VSIs and hence it is more efficient to decrease their volumes to achieve the compactness improvement. The investigation methodology and procedure for arbitrary phase number VSI DC-link …
-
New Approaches to Interface Renewable Energy Systems to Electric Utility via Higher Frequency Transformer Isolation
… to a utility grid are explored. It is shown a DC collection grid is preferred due to its simplicity, low cost in terms of structure and low losses. In the first study, a medium voltage DC collection grid photovoltaic PV power plant using 12-pulse SCR converter and line frequency phase-shift …
-
Comparison between three- and five-phase permanent magnet generators connected to a diode bridge rectifier
… phase failures in terms of torque ripple and dc output voltage ripple. The rms current in the dc link capacitor is discussed for the 5-phase and 3-phase systems under normal and failure conditions. If, under normal conditions, the capacitor is specified to give the same output voltage ripple …
-
DC-DC converter current source fed naturally commutated brushless DC motor drive
… is to reduce the cost and size of a brushless dc motor (BLDC) drive as well as increase the reliability and ruggedness of that drive. Traditional BLDC drives use Voltage Source Inverters (VSI) that utilize hard switching, thereby generating switching losses and entail the use of large …
-
A Single-Phase GaN Totem-Pole Bridgeless PFC with an H-Bridge Active Power Decoupling
… H-Bridge APD and the large aluminum electrolytic DC-Link Capacitor (1,880 μF) located at the interface between the converter and the DC load is replaced by the suppressed polypropylene film DC-Link Capacitor (5 μF). The additional H-Bridge APD circuit generates a reactive power that matches and …
-
Design Approaches to Enhance Power Density in Power Converters for Traction Applications
… Power Conversion Units (PCUs) consisting of DC-DC and DC-AC stages. The strategy significantly improves the volumetric power density, as evident by a proposed PCU constructed and tested having 55.6 kW/L, representing an 11.2 % improvement on the Department of Energy’s 2025 goal of 50 kW/L for …
-
A new switching technique for minimisation of DC-link capacitance in switched reluctance machine drives.
… de-fluxing energy in stator windings back to the dc-link results in a large dc-link capacitance. This limits its applications where weight and size of the drive are restricted. This thesis describes a control technique for the dc-link capacitance minimisation in an SR drive. The proposed control …
-
Reliability Enhancing Control Algorithms for Two-Stage Grid-Tied Inverters
… connected to the PV arrays, while an additional dc-dc stage is inserted between the PV arrays and the dc-ac inverter in the two-stage design. The additional dc-dc stage could provide a stable dc-link voltage to the inverter, which also enables new design possibilities, including the multi-MPPT …
Page 1 of 5