Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"DEHPA"”.

  1. Solvent Extraction of Lithium from HCl and NaOH Lixiviants Using a Mixed DEHPA-Cyanex 936P Extractant System

    … comprising Di-(2-ethylhexyl) phosphoric acid (DEHPA), an acidic organophosphorus extractant, and a commercial Phosphorus-based extractant (Cyanex 936P) dissolved in kerosene. A systematic comparison of lithium behaviour from acidic (HCl) and alkaline (NaOH) lixiviant environments was conducted …

    sask Repository record for Solvent Extraction of Lithium from HCl and NaOH Lixiviants Using a Mixed DEHPA-Cyanex 936P Extractant System (opens in a new tab) Embargoed until 2027-05-01

  2. Charakterisierung des selektiven Extraktionsverhaltens von Titan

    … Solventextraktion durch das Extraktionsmittel DEHPA (Di-(2-ethylhexyl)phosphorsäure) erfolgen. Durch Extraktionsversuche zeigt sich, dass Titan bevorzugt extrahiert werden kann und es wird der ideale Arbeitspunkt für die Extraktion von Titan erarbeitet. Dabei zeigt sich, dass acht …

    qucosa-diss

  3. Extractant Impregnated Membranes for Cr(III) and Cr(VI)

    … and di-(2-ethylhexyl) phosphoric acid (DEHPA) were used for the selective removal and enrichment of the anionic forms of Cr(VI) and cationic forms of Cr(III), respectively. Results show Aliquat-336 and DEHPA effectively remove Cr(VI) and Cr(III) from aqueous solutions. Extraction …

    vt Repository record for Extractant Impregnated Membranes for Cr(III) and Cr(VI) (opens in a new tab)

  4. THERMODYNAMIC MODELING AND EQUILIBRIUM SYSTEM DESIGN OF A SOLVENT EXTRACTION PROCESS FOR DILUTE RARE EARTH SOLUTIONS

    … sources. Di-2(ethylhexyl) phosphoric acid (DEHPA) was used as the extractant to selectively transfer the REEs in the PLS from the aqueous phase to the organic phase. The tests performed on the model PLS found that reduction of Fe3+ to Fe2+ prior to introduction to the SX process provided a …

    uky-thes Repository record for THERMODYNAMIC MODELING AND EQUILIBRIUM SYSTEM DESIGN OF A SOLVENT EXTRACTION PROCESS FOR DILUTE RARE EARTH SOLUTIONS (opens in a new tab)

  5. Lanthanide Separation Using Rate-Controlled Solvent Extraction

    … aqueous complexing agent and were extracted with DEHPA (di-2 ethylhexylphosphoric acid) in an organic phase (kerosene). The experiments were designed to measure the rates of extraction in the hope that separation factors might be enhanced under non-equilibrium conditions. The complexing agents …

    utk-theses Repository record for Lanthanide Separation Using Rate-Controlled Solvent Extraction (opens in a new tab)

  6. Selective Recovery of Rare Earth Elements from Acid Mine Drainage Treatment Byproduct

    … including regular solvent extraction with DEHPA, solvent extraction with a phase modifier of TBP, and post-oxidation solvent extraction, were evaluated to enhance the purity of produced rare earth oxides (REO). The final process selected for REE recovery consists of (a) sulfuric acid …

    wvu Repository record for Selective Recovery of Rare Earth Elements from Acid Mine Drainage Treatment Byproduct (opens in a new tab)

  7. Surface-driven instabilities at oil-water interfaces

    … surfactant Di-(2-ethylhexyl) phosphoric acid (DEHPA) in the aqueous phase. One of the main goals is to understand several surface-driven instabilities and how those can be manipulated for future applications.Furthermore, this thesis aims to use these oil-surfactant droplets as a medium to …

    arkansas Repository record for Surface-driven instabilities at oil-water interfaces (opens in a new tab)

  8. Solvent Extraction of Yttrium: Modeling the Rate Coefficient, Loading Ratio and Stoichiometric Ratio

    … solutions using di(2-ethylhexyl) phosphate (DEHPA) for three studies. In doing so, three process parameters were analyzed: extraction rate coefficient, loading ratio, and stoichiometric ratio. The first parameter, extraction rate coefficient, was modeled for a mixer-settler where the organic …

    utk-theses Repository record for Solvent Extraction of Yttrium: Modeling the Rate Coefficient, Loading Ratio and Stoichiometric Ratio (opens in a new tab)

  9. MODELING OF RARE EARTH SOLVENT EXTRACTION PROCESS FOR FLOWSHEET DESIGN AND OPTIMIZATION

    … research at the University of Kentucky. A DEHPA and TBP mixture was used as an extractant. Similarly, stripping experiments were carried out on loaded organic at different equilibrium acid molarities and phase ratios. The results obtained from the experiments were utilized in developing …

    uky-thes Repository record for MODELING OF RARE EARTH SOLVENT EXTRACTION PROCESS FOR FLOWSHEET DESIGN AND OPTIMIZATION (opens in a new tab)