Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 33 for “"DEM modelling"”.
-
Predicting HPGR performance and understanding rock particle behavior through DEM modelling
… objective of the research was to develop a DEM based computer model for an HPGR to analyze the particle behavior in the unit and to predict its sizing information. EDEM, a DEM based software, was used to model the pilot scale HPGR unit and single particle compression test was used to …
-
DEM modelling of particle breakage and its application to ball milling
… and complex process. Discreet Element Method (DEM) has been recognised as a powerful tool to model, simulate and then understand the grinding, as it is capable of providing micro-scale information of particle interactions. Direct DEM modelling of particle breakage using particle replacement …
-
CONVEYING POROUS BIOLOGICAL PARTICLES USING JET PUMPS: EXPERIMENTAL MEASUREMENTS AND COUPLED CFD-DEM MODELLING
… validated discrete element method (DEM) model of seed cotton was also created. These models were then coupled to create an experimentally validated model of the flow and blockage formation of seed cotton within a jet pump, and to optimize the design of the jet pump for conveying seed …
-
Particle-scale study of spout deflection in spouted beds by CFD-DEM modelling and experiments
… Fluid Dynamic-Discrete Element Method (CFD-DEM) coupling approach as well as PIV experiments. It is noted that the rectangular spout fluidised bed, as a kind of spouted bed, is widely used in this study because the spout deflection phenomenon in it is most obvious. In the past, the …
-
CFD-DEM MODELLING OF PARTICLE-GAS REACTIVE FLOWS AND ITS APPLICATION IN BLAST FURNACE REGIONS
… fluid dynamics-discrete element method (rCFD-DEM) featuring two state-of-the-art techniques - coarse-grained method and smoothing method is developed to describe raceway dynamics and coke combustion in a three-dimensional (3D) industrial-scale BF. The typical phenomena are illustrated in terms …
-
FEM and DEM modelling of briquetting of fine powders: multi-scale analysis of briquette structural and mechanical properties
… method (FEM) and discrete element method (DEM), were employed in the research. FEM considers compacts as continuum porous materials and can provide full scale simulations. On the other hand, DEM is a particle-based technique and can provide detailed information at the particle scale. The …
-
A PBM framework based on DEM modelling and particle breakage kinetics to investigate continuous grinding in ball mills
… simulations using the discrete element method (DEM) (e.g. particle flow pattern, collision energy, collision frequency and residence time distribution) with particle breakage kinetics obtained from physical experiments (i.e. particle breakage rate and breakage function). The model was verified …
-
CFD-DEM modelling of liquid-solid-gas flow in rotary drums and an application in solar panel leaching
… fluid dynamics-discrete element method (CFD-DEM) coupled with the volume of fluid (VOF) to describe the complex behaviours of liquid-nonspherical-particle-gas flow. Then, it is particularly applied to the application of the silver leaching process in a rotary drum - a crucial step in the …
-
Soil and crop responses to normal and shear loading: measurements and discrete element modelling
… field measurements, and Discrete Element Method (DEM) modelling. Laboratory surface shear tests revealed that soil shear strength generally increased in both sandy loam and clay soils when subjected to higher normal stresses. In clay soils, elevated moisture content reduced particle detachment, …
-
Applications of Computational Models on Studying Particulate Systems
… has been modeled by discrete element method (DEM) to understand the mechanism of granular self-organization. Sets of studies have then been performed to study the effect of different parameters. This work may benefit the design and operation of equipment involving such kind of granular …
-
Particle Engineering
… tool. Applying Discrete Element Method (DEM) modelling allows for simulating the formation and dispersion of drug-carrier agglomerates. Simulating corresponding patterns provides insights into the influence of particle morphology on carrier loading and particle detachment. In summary, …
-
3D Study of Gas Hydrate Formation and Dissociation in Porous Media and DEM Modeling of Granular Materials
… gas hydrates availability and ongoing rise in demand for energy, motivated researchers to consider gas hydrates as a potential energy source. Production of methane from hydrate-bearing sediments requires hydrate dissociation for releasing mobile methane gas in sediments prior to gas production …
-
Soft-sensor development for milling processes guided by discrete element method Modelling
… such as the discrete element method (OEM) of modelling, which is used to simulate many particulate systems. In this thesis, rotating and stirred drums are simulated over a wide variety of operating conditions using DEM modelling, Microscopic scale data are obtained from the simulations and …
-
Assessing powder flowability at low consolidation stresses
… at lower stresses. Distinct Element Method (DEM) modelling was also utilised to simulate the ball indentation system, allowing the powder bed internal failure stresses to be realised in order to elucidate the behaviour of the constraint factor at low stresses. The simulations validated the …
-
Laboratory and discrete element study of proppant crushing and embedment and their influence on fracture conductivity
… models, the discrete element method (DEM) is a natural approach for simulating proppant crushing and embedment into fracture faces. However, current DEM simulations have not considered proppant crushing under high closure stresses. In addition, the mechanical properties of different …
-
The Application Of Polymer Particles In Industrial Processes
… best practice in such industries. In terms of academic research, the knowledge created in this thesis provides the basis for the application of CFD-DEM modelling to understand complex multi-phase and multi-component systems. In particular, the thesis advocates the application of the Free Surface …
-
Evolution of joint contact area and its effect on joint frictional and fluid flow behaviour
… fact, require a full understanding and accurate modelling of joint shearing processes. Characterising the joint frictional behaviour during shearing, however, offers significant experimental and theoretical challenges. This dissertation, therefore, aims to understand the shearing and fluid flow …
-
Investigating the Evolution of Rock Discontinuity Asperity Degradation and Void Space Morphology under Direct Shear
… by the lack of appropriate visualization and modelling tools. In particular, until recently it was not possible to observe asperity damage without physically separating the joint specimen or explicitly modelling the development of damage during a direct shear test.In the last decade, X-ray …
-
Measuring and Monitoring Particle Size Distribution to Divert Low Value Waste in Mining
… (CT) data into the Discrete Element Method (DEM) modelling to replicate ore texture and simulate breakage. A numerical modelling approach is used to construct a synthetic rock model based on mineralogy, incorporating mineral grains, cementation, strength, lithology, and rock structure. The …
Page 1 of 2