Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 36 for “"DEVICES FABRICATION"”.

  1. Advanced III-nitride-based optoelectronic devices: fabrication and characterization /

    The thesis is aimed at optimizing the issues of currently relevant InGaN LEDs production steps. The dissertation has three main objectives: determination of the optimal characterization method of InGaN MOCVD-grown epitaxial layers, development of a simple and low cost prototyping method of LEDs …

    vilnius Repository record for Advanced III-nitride-based optoelectronic devices: fabrication and characterization / (opens in a new tab)

  2. Novel Magnonic Crystals and Devices: Fabrication, Static and Dynamic Behaviors

    In the last decade, magnonic crystals (MC), conceived as the magnetic analogue of photonic crystals, have attracted a lot of interest due to their potential use in a wide range of applications. In this thesis, a comprehensive study of the static and dynamic magnetic properties of various types of …

    nus Repository record for Novel Magnonic Crystals and Devices: Fabrication, Static and Dynamic Behaviors (opens in a new tab) Download file for Novel Magnonic Crystals and Devices: Fabrication, Static and Dynamic Behaviors (opens in a new tab)

  3. MAGNETO-TRANSPORT PROPERTIES OF 2D MATERIALS AND HETEROSTRUCTURES

    … laying the foundation for ultrathin electrical devices. Fabrication of 2D materials heterostructures introduces a new degree of freedom for the exploration of 2D materials, and holds a great promise to study new properties, as well as offers a whole new perspective to familiar physical …

    nus Repository record for MAGNETO-TRANSPORT PROPERTIES OF 2D MATERIALS AND HETEROSTRUCTURES (opens in a new tab) Download file for MAGNETO-TRANSPORT PROPERTIES OF 2D MATERIALS AND HETEROSTRUCTURES (opens in a new tab)

  4. BETA GALLIUM OXIDE MATERIALS PROCESSING AND DEVICE APPLICATIONS

    … its promising future for high-power electronic devices due to its ultra-wide bandgap (~4.9 eV), high breakdown field (~8MV/cm) and commercially available high-quality single-crystal wafers. Its Baliga’s Figure of Merit (BFOM) is ~4 times as large as those of GaN and SiC for power efficiency. …

    cornell Repository record for BETA GALLIUM OXIDE MATERIALS PROCESSING AND DEVICE APPLICATIONS (opens in a new tab)

  5. LAMINATED PEROVSKITE-CIGS TANDEM: ADVANCING EFFICIENT, SUSTAINABLE, AND SCALABLE SOLAR CELLS

    … Lamination is first studied for single junction devices fabrication through integration at perovskite/perovskite interface. For this, scalable co-evaporated perovskite is first optimized for smoother surface. Subsequently, a bilayer co-evaporated perovskite film is developed to realize …

    nus Repository record for LAMINATED PEROVSKITE-CIGS TANDEM: ADVANCING EFFICIENT, SUSTAINABLE, AND SCALABLE SOLAR CELLS (opens in a new tab) Download file for LAMINATED PEROVSKITE-CIGS TANDEM: ADVANCING EFFICIENT, SUSTAINABLE, AND SCALABLE SOLAR CELLS (opens in a new tab)

  6. Electrodeposition and Characterization of Copper Oxide Thin Films

    … in solar energy conversion and oxygen sensing devices. Fabrication of these films by electrodeposition offers a simple and cost effective method for producing large-area thin films in mass quantities. An interesting phenomenon associated with this material is the variation of the conduction …

    mo-state Repository record for Electrodeposition and Characterization of Copper Oxide Thin Films (opens in a new tab)

  7. Synthesis, Characterization, and Device Fabrication Utilizing Novel Metal-Doped Germanium Selenide Phase-Change Memory Materials

    … for multi-state memory behavior in electrical devices. Fabrication processes were then developed in order to create single-bit memory devices containing a single layer of the synthesized glasses that could be electrically tested. These processes included thermal evaporation of the chalcogenide …

    boise Repository record for Synthesis, Characterization, and Device Fabrication Utilizing Novel Metal-Doped Germanium Selenide Phase-Change Memory Materials (opens in a new tab)

  8. STIMULATED RAMAN SCATTERING IN MICRO SPHERE RESONATORS

    … model and finite element method (FEM). Fabrication of devices like silica binocular tapered fiber couplers and silica micro spheres is developed. The measurement setup is established, based on which characteristics of silica micro sphere resonators are measured. The result is compared to …

    clemson Repository record for STIMULATED RAMAN SCATTERING IN MICRO SPHERE RESONATORS (opens in a new tab)

  9. Hybrid light emitting diodes and photodetectors using polymers and perovskites via electrospraying and ink-jet printing

    This dissertation focuses on the opto-electronic devices fabrication, including LEDs and PDs using organic/inorganic hybrid materials including triple-cation perovskite, conjugated polymers, and n-type Si via spin-coating, electrospraying and ink-jet printing fabrication techniques. Followed by an …

    ets-quebec Download PDF for Hybrid light emitting diodes and photodetectors using polymers and perovskites via electrospraying and ink-jet printing (opens in a new tab)

  10. Nanoarchitectured Energy Storage Devices

    Supercapacitors, the devices that connect the gap between batteries and conventional capacitors, have recently attracted significant attention due to their high specific capacitance, substantially enhanced power and energy densities, and extraordinary cycle life. In order to realize even better …

    ucf Repository record for Nanoarchitectured Energy Storage Devices (opens in a new tab)

  11. X-ray diffraction techniques for future advanced CMOS metrology challenges

    … of high quality III-V material on Si for CMOS devices fabrication because the tolerance to dislocations is very low (<105 cm-2). In order to overcome this problem, a non-destructive X-ray characterisation routine which can be used to effectively help III-V growers identify various issues …

    dcu Download PDF for X-ray diffraction techniques for future advanced CMOS metrology challenges (opens in a new tab)

  12. Vanadium Dioxide for Memory, Oscillators, and Optical Beam Manipulation

    … a tunable metasurface device. To realize these devices, fabrication techniques were developed. Different dry etching recipes were created for making VO2 micro-wires depending on the material crystallinity. In addition, a post-fabrication technique using current injection was developed to create …

    toronto-retro Repository record for Vanadium Dioxide for Memory, Oscillators, and Optical Beam Manipulation (opens in a new tab)

  13. Boron tribromide sourced boron diffusions for silicon solar cells

    … open circuit voltage compared to Al/Si alloyed devices. Fabrication of n-type solar cells, and their subsequent characterization by overlayed secondary electron image and the electron beam induced current map showed that the Al/Si alloy varied in depth from 5 to 25 micrometers deep. Methodology …

    unsw Repository record for Boron tribromide sourced boron diffusions for silicon solar cells (opens in a new tab)

  14. Towards bottom-up silicon nanowire-based biosensing:

    … nanowire (SiNW) based sensors. Innovative device fabrication concepts are developed from various directions, for a facile and reliable assembly of LoC analysis systems. Firstly, a multifunctional microfluidic set-up is developed which allows for a facile reversible sealing of channel structures on …

    qucosa-diss

  15. Piezoelectric Nanostructures of Zinc Oxide: Synthesis, Characterization and Devices

    … on the synthesis, characterization and device fabrication of piezoelectric ZnO nanstructures. The achieved results are composed of the following four parts. Firstly, through a systematic investigation on the Sn-catalyzed ZnO nanostructure, an improved understanding of the chemical and physical …

    gatech Repository record for Piezoelectric Nanostructures of Zinc Oxide: Synthesis, Characterization and Devices (opens in a new tab)

  16. Advanced Characterisation of Black Silicon by Electron Microscopy Techniques

    … by changing the surface morphology during the fabrication process. The diverse range of BSi surface morphology enables it to suit the requirements for many applications in the semiconductor industry, such as high-efficiency solar cells, biosensors, photocathodes, or as an anode for lithium …

    unsw Repository record for Advanced Characterisation of Black Silicon by Electron Microscopy Techniques (opens in a new tab)

  17. Nanoengineered Energy Harvesting and Storage Devices

    … attention due to its flexibility, ease of fabrication and excellent performance. In order to realize even better performance for organic and perovskite solar cells, rejuvenated effort towards developing nanostructured electrodes and high quality active layer is necessary. In this …

    ucf Repository record for Nanoengineered Energy Harvesting and Storage Devices (opens in a new tab)

  18. Device Modelling and Circuit Design in Beyond Moore Technologies

    … for circuit design by leveraging new materials, devices and computing paradigms. Using as central theme the design of a flexible system capable of detecting and classifying insect species as either harmful or beneficial, three distinct Beyond Moore approaches are investigated: metal-oxide thin …

    qucosa-diss

Page 1 of 2