Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"DIE-SWELL"”.

  1. Die swell in molten polymers

    <p>The die swell of six polymer melts was measured and the melts were rheologically characterized. The materials studied were high density polyethylene of melt indices 5, 0.1 and 0.02, low density polyethylene, polystyrene and polypropylene.</p><p>The die swell was measured in four different ways: …

    ut-knoxville Repository record for Die swell in molten polymers (opens in a new tab)

  2. Effect of Capillary Dimensions On Die Swell of Molten Polymers

    <p> The effect of capillary dimensions on the die swell of molten polymers is investigated. Low and high density polyethylene, polypropylene, polystyrene are used to make investigation It is found the die swell decreases vii th L/D. The plot of die swell index (d/D) vs. L/D has the shape of …

    mcmaster Repository record for Effect of Capillary Dimensions On Die Swell of Molten Polymers (opens in a new tab)

  3. The effect of molecular weight parameters on the die swell of polymer melts

    … (molecular weight and its distribution) on the die swell properties of polystyrene were investigated under isothermal conditions. Four starting materials (two commercial samples and two samples of narrow molecular weight distribution) and blends of these materials were used.</p><p>The …

    ut-knoxville Repository record for The effect of molecular weight parameters on the die swell of polymer melts (opens in a new tab)

  4. On the influence of glass fibers on the rheological properties and processing of polymer melts

    … elongational viscosity, entrance pressure loss, die swell, and injection molding have been investigated for glass fiber filled polypropylene, high density polyethylene and polystyrene melts. Viscosity measurements are consistent in cone-plate and capillary instruments. Normal stress coefficients …

    ut-knoxville Repository record for On the influence of glass fibers on the rheological properties and processing of polymer melts (opens in a new tab)

  5. Determination of fiber orientation of composites using wide angle X-ray diffraction

    <p>Studies of both rheological properties and fiber orientation development due to flow of short fiber filled thermoplastic systems are described. These composite systems are mechanical mixtures of an amorphous polymethyl-methacrylate (PMMA) matrix with short crystalline aramid (Kevlar 49) …

    ut-knoxville Repository record for Determination of fiber orientation of composites using wide angle X-ray diffraction (opens in a new tab)

  6. Development of the West Virginia University Small Microgravity Research Facility (WVU SMiRF)

    … that was chosen was to determine the effects of die swell, or extrudate swell, in reduced gravity. Die swell is a viscoelastic phenomenon that occurs when a dilatant, or shear-thickening substance is forced through a sufficient constriction, or "die," such that the substance expands, or "swells," …

    wvu Repository record for Development of the West Virginia University Small Microgravity Research Facility (WVU SMiRF) (opens in a new tab)

  7. Nonisothermal behavior in polymer rheology and polymer processing

    … used to predict stress during elongation, was studied further. Differences between theory and experiment when the cooling rate was high or the temperature of the experiment was near the glass transition temperature led to a study of the effect of cooling rate on this transition. Also, earlier work …

    ut-knoxville Repository record for Nonisothermal behavior in polymer rheology and polymer processing (opens in a new tab)

  8. Steady State Modeling and Dynamic Analysis of Film Blowing

    … were more significant than the effect of die swell. In addition, crystallinity is shown to have a stabilizing effect on the system, with more crystallinity dampening the effect of perturbations. Stability diagrams for each material and model show reasonable results, with higher blow-up …

    uiuc Repository record for Steady State Modeling and Dynamic Analysis of Film Blowing (opens in a new tab)

  9. Modeling of Dry Spinning of Polymer Fibers

    … dry spinning model together with a die swell subroutine supplied by an industrial company has been used to generate predictions, which were compared to experimental data. Based on the analysis of the predictions and comparisons, we learn that phase separation cannot occur during dry …

    uiuc Repository record for Modeling of Dry Spinning of Polymer Fibers (opens in a new tab)

  10. Computational modeling of fiber reinforced composites melt flow in nozzle extrudate for polymer deposition additive manufacturing.

    … LAAM bead output properties (e.g., extrudate swell, fiber orientation, and effective elastic constants). The finite element method is applied to solve the flow kinematics and free surface shape of the nozzle-extrudate polymer melt that is defined by generalized Newtonian and viscoelastic flow …

    baylor Repository record for Computational modeling of fiber reinforced composites melt flow in nozzle extrudate for polymer deposition additive manufacturing. (opens in a new tab)

  11. The effect of die flow on the dynamics of isothermal melt spinning

    … unsteady isothermal melt spinning have been studied, with emphasis on the effect of the die flow variables. Experimental results reported by earlier workers and supplemental data obtained in the present work are compared with theory and are in reasonable agreement.</p> <p>An analysis of die flow …

    utk-theses Repository record for The effect of die flow on the dynamics of isothermal melt spinning (opens in a new tab)

  12. Feed Rate Effects In Freeform Filament Extrusion

    … feeding mechanism of an FFE 3D printer was studied in order to find the slippage (loss) between the feeding mechanism and the filament. The relationship between feed screw rotational speed and volumetric flow rate through the nozzle tip was then established. With known volumetric flow rates, …

    rit Repository record for Feed Rate Effects In Freeform Filament Extrusion (opens in a new tab)

  13. Dynamics of steady and unsteady melt spinning

    … addition the variables which have to do with the die flow. An integral viscoelastic analysis for steady spinning developed by Matsui and Bogue, which includes the shear rate in the die as a parameter, was solved numerically for comparing with data from steady spinning and also as a guide for …

    utk-theses Repository record for Dynamics of steady and unsteady melt spinning (opens in a new tab)

  14. An experimental and numerical analysis of the exit flow in a slit die for polymer melts

    A slit die has been constructed to use both flow birefringence and direct pressure measurements to study the extrapolated exit pressure (Px) and the exit pressure theory used to evaluate the magnitude of the primary normal stress difference (N1) from the value of the exit pressure. Flow …

    vt Repository record for An experimental and numerical analysis of the exit flow in a slit die for polymer melts (opens in a new tab)

  15. Simulation of micro-void development within large scale additively manufactured polymer composite deposition beads.

    … with abrupt changes in flow direction like the die-swell region just after the nozzle exit. We also investigate potential factors that may influence the development of these micro-voids, such as the particle interactions, the rheology of the suspension, the flow type, the size and geometry of …

    baylor Repository record for Simulation of micro-void development within large scale additively manufactured polymer composite deposition beads. (opens in a new tab)

  16. Development and characterization of thermoplastic biopolyester compounds and their processing by 3D bioplotting

    … shear rates, shear stresses, pressure drops and die swell of extruded miscible polycaprolactone (PCL) blends having a range of viscosities. Assuming simple capillary flow, flow curves were constructed. Relevant dimensionless numbers that reflected the material rheological properties and …

    queens Repository record for Development and characterization of thermoplastic biopolyester compounds and their processing by 3D bioplotting (opens in a new tab)

  17. Process-structure-property relationships in different molecular weight polyropylene melt blown webs

    … throughput rate, air flow rate, melt blowing die orifice diameter, and extrusion and attenuation air temperatures. The properties studied were: stress-strain behavior of webs and single fibers; failure modes; bending rigidity; bursting strength; average fiber diameter; fiber distribution; air …

    utk-theses Repository record for Process-structure-property relationships in different molecular weight polyropylene melt blown webs (opens in a new tab)

  18. NUMERICAL ANALYSIS OF THE EXTRUSION OF FIBER OPTIC AND PHOTONIC CRYSTAL FIBER PREFORMS NEAR THE GLASS TRANSITION TEMPERATURE

    … to validate both the value of ram force and die swell. Since the Navier law is the most widely used friction law in the extrusion literature and has been identified as a key parameter required in modeling, the ring compression test was adapted to obtain the Navier friction coefficient from …

    clemson Repository record for NUMERICAL ANALYSIS OF THE EXTRUSION OF FIBER OPTIC AND PHOTONIC CRYSTAL FIBER PREFORMS NEAR THE GLASS TRANSITION TEMPERATURE (opens in a new tab)

  19. Polyacrylonitrile / carbon nanotube composite fibers: effect of various processing parameters on fiber structure and properties

    … carried out. Rheological and fiber spinning studies have also been carried out on PAN-co-MAA/VGCNF (vapor grown carbon nano fiber). The diameter of PAN-co-MAA/VGCNF composite fiber is smaller than that of the PAN-co-MAA control fiber with same draw ratio due to the suppressed die-swell in the …

    gatech Repository record for Polyacrylonitrile / carbon nanotube composite fibers: effect of various processing parameters on fiber structure and properties (opens in a new tab)

  20. Extrusion of starches: Expansion and modeling with neural networks

    … them. And finally forcing the melt through a die constriction to the atmosphere releasing the pressure and leading to an expanded product. Starch is a complex biopolymer and due to its complex behavior under different extrusion conditions it is difficult to model the process of starch …

    nebraska Repository record for Extrusion of starches: Expansion and modeling with neural networks (opens in a new tab)

Page 1 of 2