Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Damage factor"”.
-
Damage accumulation in random loads.
… is also proposed. This research takes a fatigue damage factor approach. The damage factor is defined as the ratio of the wide band rainflow fatigue damage to the equivalent narrow band fatigue damage. The mathematical form of the damage factor equations is derived from theoretical derivations …
-
Quasistatic peridynamics, existence of unique solution in the presence of damage
A mathematical model for damage propagation based on nonlocal potentials is developed within the framework of peridynamics. This model is applied to simulate damage evolution in cyclically loaded structures. By neglecting inertial effects, a well-posed quasistatic formulation for cyclic loading is …
-
Low-Cycle Fatigue Damage In Structures Subjected To Earthquake Excitation.
… then obtained and the corresponding cumulative damage factor in the structure is calculated.
-
Micromechanical Simulation for Fatigue Damage Incubation
… cyclic behavior is introduced. A damage factor D is proposed to study the possibility of interfacial crack propagation. With this factor, plastic wake zone behind the debonding is studied.
-
Evaluation of structural earthquake damage to buildings in Southwestern B.C.
… study the regional distribution of estimated damage that a building inventory will experience given a level of seismic intensity. This thesis presents a methodology for the evaluation of structural earthquake damage to buildings in Southwestern British Columbia. The steps in the risk analysis …
-
Structural integrity of steel hydrocarbon pipelines with local wall distortions
… results. Based on the numerical results, a damage factor is computed and the fatigue life is predicted and compared successfully with the experimental results. The results of the present study are aimed at evaluating existing guidelines and methodologies towards proposing a simple and …
-
A probabilistic neural network computer vision system for corn kernel damage evaluation
… could be used for identification of the damage factor in corn kernels. Prominent types of corn kernel damage were found to be germ damage and blue-eye mold damage. A sample set containing 720 kernels with approximately equal numbers of blue-eye mold-damaged, germ-damaged, and sound …
-
Simulating soybean cyst nematode (Heterodera glycines) damage using the CROPGRO-Soybean crop growth model
… from efforts to quantify the severity of crop damage resulting from SCN were subject to variable experimental conditions resulting from differences in weather, soil type, and cultivar. Because of the difficulty accounting for these variables, a crop growth simulation model was chosen as a …
-
Copper-plated carbon fibres
… and thermal stress and equated to an overall damage factor. In conclusion major variables affecting strength of carbon fibres, with and without copper deposits, are assessed in relation to results described. Further techniques leading to production of better composites are also discussed, a …
-
Injection Impairment by Suspended Solids: Well Models, Filtration Parameters, and Models’ Validation with 3-D Injection Experiments
… 3-D sand pack tests. Filtration coefficient and damage factor are required for modeling internal formation plugging from suspended solids particles during water injection. This is obtained experimentally and depends on flow velocity, particle slurry concentration, particle size, and formation …
-
Carrier Lifetime vs. Proton Radiation in Prototype III-V and II-VI Space-based Infrared Detectors
… for spacecraft electronics, due to displacement damage increasing the concentration of SRH defects. In this work, a measurement system was designed and constructed to directly measure the minority carrier recombination lifetimes of prototype IR detector structures at the wafer die level as …
-
Design of reinforced concrete seals for underground coal mines
… numerical models.;Entry height is the dominating factor in RC seal design, whereas entry width has little effect. The tensile failure of concrete material on the outby surface of the seal dominates the seal failure mechanism. The reinforced steel rebars resist the high tensile stresses that may …
-
An Enhanced Mechanistic Analysis Framework for Designing Resilient Airfield Pavements
… calculations are necessary to estimate the damage to airport pavements over their service life. To this end, several methods are available, which can vary depending on the computational approach used and the way that material properties are considered. The successful mechanistic analysis of …
-
A matched-harmonic confluence approach to rotor loads prediction with comprehensive application to flight test
… be more heavily based on individual component damage tracking and less on legacy usage monitoring (flight parameter-based) methods. This enhances health assessment capabilities by taking into account the actual loads on a component-by-component basis. However, accurate loads prediction in …
-
Calculation methodology for turbine rotor fragment containment
… not significantly affect the casing, as the main damage is created by the bulky section (the shroud, the blade platform, or its root). Finally, this study highlights key differences between modeling the containment of a shrouded versus a shroudless blade fragment, aspects not considered in the …
-
Μελέτη εσωτερικής φθοράς επιλεγμένων υλικών
In this thesis is studied the internal damage of selected specimens. The phenomenon of damage and the way of calculation of damage is presented. The first chapter includes the necessary elements from damage mechanics and the method of damage measurements. In second chapter are presented the …
-
Supporting Holistic, Informed, Decision-Making through the Complementarity of Life Cycle Assessment and Radiological Protection
… Protection (CURP). CURP reports characterization factors (CFs) iii and damage factors (DFs) and is comparable to (1) methods established for other impact categories and (2) those used in radiological risk assessment. Consistent with the previously established UCrad approach, USEtox was used to …
-
New Paradigms in E. coli Hemolysin Function and Pathogenesis
… we demonstrate that HlyA functions as a renal damage factor, exacerbating renal tubular epithelial injury in vivo. As CD18 is expressed exclusively on hematopoietic cells, we leveraged a CRISPR-Cas9 loss-ofxii function screen to uncover an alternative HlyA targeting mechanism in renal …
-
EXPERIMENTAL AND ANALYTICAL STUDIES ON THE EVALUATION OF ELASTOMERIC BRIDGE BEARINGS
… imperfections. Imperfections could also increase damage measured using a plastic-energy-based damage factor by up to more than five times for bearings subjected to the five-cycle displacement protocol. However, the yielded laminates in all examined bearings under maximum service loading or cyclic …
-
Metallurgical causes for the occurrence of creep damage in longitudinally seam-welded Cr-Mo high energy piping
… of the metallurgical causes for the failures and damage in the Cr-Mo seam-welded piping plays a major role in estimating possible life-extension and decision making on whether to operate, repair or replace.</p> <p>In this study, an optical metallographic method and a Cryo-Crack fractographic …
Page 1 of 2