Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 67 for “"Damage modeling"”.

  1. Damage Modeling Method For Turbine Compressor Blade Tuning

    … thesis presents a method of evaluation for blade damage in Combustion Turbine Compressor Section. This method involves use of multiple domains within a single Finite Element Model to predict the effect of damage on the blade properties. This approach offers significant time and effort savings when …

    ucf Repository record for Damage Modeling Method For Turbine Compressor Blade Tuning (opens in a new tab)

  2. Finite element damage modeling of plain weave fabrics

    … tensile loading is presented. Then, a meso level damage model is used for predicting the inelastic tensile behavior of the fabrics. The damage model is validated for the tensile response of T300/5208 laminate for four configurations, [10/-10]2s, [0/45/-45/90] s, [30/-30]2s and [45/-45]2s. Then, …

    wvu Repository record for Finite element damage modeling of plain weave fabrics (opens in a new tab)

  3. Continuum Damage Modeling of Rocks Under Blast Loading

    … of stress wave interaction on the resulted rock damage and fragmentation is investigated using a range of initiation delay times. Different scenarios of wave superposition are examined and an optimum delay window is introduced based on the elastic stress wave theory. Second, the effectiveness of …

    queens Repository record for Continuum Damage Modeling of Rocks Under Blast Loading (opens in a new tab)

  4. Elasto-plastic and damage modeling of reinforced concrete

    Modeling the mechanical behavior of Reinforced Concrete (RC) is still one of the most difficult challenges in the field of structural engineering. The Nonlinear Finite Element Analysis (NFEA) and modeling of the behavior of RC members are the primary goals of this study. The macroscopic components …

    lsu-thes Repository record for Elasto-plastic and damage modeling of reinforced concrete (opens in a new tab)

  5. Progressive damage modeling of composite materials under compressive loads

    … strength. There are a multitude of compression damage mechanisms that occur in composites, the form of which depends on the properties of the constituents and fibre lay-up. These mechanisms primarily consist of a combination of matrix cracking (yielding), localized buckling of fibres or kinking, …

    ubc Repository record for Progressive damage modeling of composite materials under compressive loads (opens in a new tab) Download PDF for Progressive damage modeling of composite materials under compressive loads (opens in a new tab)

  6. Continuum-based Multiscale Computational Damage Modeling of Cementitous Composites

    Based on continuum damage mechanics (CDM), an isotropic and anisotropic damage model coupled with a novel plasticity model for plain concrete is proposed in this research. Two different damage evolution laws for both tension and compression are formulated for a more accurate prediction of the plain …

    tamu Repository record for Continuum-based Multiscale Computational Damage Modeling of Cementitous Composites (opens in a new tab)

  7. Crack growth and damage modeling of fibre reinforced polymer composites

    Notched tensile strength and the development of damage in composite laminates are studied in this thesis through experimental, numerical and analytical methods to develop simple models for predicting notched strength using completely physical input parameters. A series of experimental tensile …

    ubc Repository record for Crack growth and damage modeling of fibre reinforced polymer composites (opens in a new tab) Download PDF for Crack growth and damage modeling of fibre reinforced polymer composites (opens in a new tab)

  8. Temperature dependent fretting damage modeling of AISI 301 stainless steel

    Prediction of fatigue damage due to fretting is complex due to the number of influential factors and the competitive interaction between wear and fatigue. The majority of current fretting damage modeling approaches are limited to narrow ranges of conditions where little competition between damage …

    gatech Repository record for Temperature dependent fretting damage modeling of AISI 301 stainless steel (opens in a new tab)

  9. A framework for damage modeling in multi-constituent laminated materials

    … materials can cause deformation and eventually damage to the overall structure of the material. There are two methods discussed throughout the document: mixture theory to discuss the evolving curing and thermal effects on the structural behavior of a fiber reinforced laminate structure and a …

    uiuc Repository record for A framework for damage modeling in multi-constituent laminated materials (opens in a new tab)

  10. Expanding microdosimetry from radiation field characterization to radiobiological damage modeling

    … in addition the potential radiobiological damage in the different regions. Analogous measurements have been also performed with ions heavier than protons, namely helium and oxygen. Finally, microdosimetry finds also an application in space radioprotection. In this perspective, two …

    trento Repository record for Expanding microdosimetry from radiation field characterization to radiobiological damage modeling (opens in a new tab)

  11. Tertiary Creep Damage Modeling Of A Transversely Isotropic Ni-based Superalloy

    Anisotropic tertiary creep damage formulations have become an increasingly important prediction technique for high temperature components due to drives in the gas turbine industry for increased combustion chamber exit pressures, temperature, and the use of anisotropic materials such as metal matrix …

    ucf Repository record for Tertiary Creep Damage Modeling Of A Transversely Isotropic Ni-based Superalloy (opens in a new tab)

  12. Damage modeling and damage detection for structures using a perturbation method

    … based methods are presented, to model areas of damage, to do damage diagnosis and to estimate and predict the sensitivity of structural vibration properties like natural frequencies to the presence of damage. Towards these objectives, a general analytical procedure, which yields nth-order …

    gatech Repository record for Damage modeling and damage detection for structures using a perturbation method (opens in a new tab)

  13. Accumulated inelastic strain based damage modeling of pressure vessel steels in air

    … for this use. This work creates a framework for modeling each of the three test methods as well as in-service conditions of a DOT3AA cylinder in the finite element platform ABAQUS. To determine the deformation response at areas of interest, a non-linear combined kinematic/isotropic hardening …

    colo-mines Repository record for Accumulated inelastic strain based damage modeling of pressure vessel steels in air (opens in a new tab)

  14. Plasticity-damage modeling of strain rate and temperature dependence of aluminum alloy 7075-t651

    This is the first study to correlate the observed damage evolution of ambient (298 ºK) and elevated temperature (480 ºK) quasi-static and dynamically-loaded wrought aluminum alloy 7075 (AA7075) to capture the strain rate and temperature influence on flow behavior with one set of material constants. …

    alabama Repository record for Plasticity-damage modeling of strain rate and temperature dependence of aluminum alloy 7075-t651 (opens in a new tab)

  15. Dosimetry, Activation, and Robotic Instrumentation Damage Modeling of the Holtec HI-STORM 100 Spent Nuclear Fuel System

    … allows predictive quantification of radiation damage within components of the robotic probe. When planning robotic inspection procedure, accurate depiction of radiation source terms and transported radiation fields is a major concern. Predictions are made in relation to the shielded field of …

    south-carolina Repository record for Dosimetry, Activation, and Robotic Instrumentation Damage Modeling of the Holtec HI-STORM 100 Spent Nuclear Fuel System (opens in a new tab)

  16. Self-reconfigurable ship fluid-network modeling for simulation-based design

    … example of such a trend. This thesis pursues a modeling solution for performing simulation-based analysis in the conceptual or preliminary design stage of an intelligent, self-reconfigurable ship fluid system, which is one of the concepts of DD(X) engineering plant development. Through the …

    gatech Repository record for Self-reconfigurable ship fluid-network modeling for simulation-based design (opens in a new tab)

  17. Damage Progression in Open-Hole Tension Composite Laminates by the Element-Failure Method

    Damage Propagation in composite laminates is traditionally modeled by the material property degradation method (MPDM), which assumes that a damaged material can be replaced by an equivalent material with degraded properties. In this thesis, a new damage-modeling technique known as the …

    nus Repository record for Damage Progression in Open-Hole Tension Composite Laminates by the Element-Failure Method (opens in a new tab) Download file for Damage Progression in Open-Hole Tension Composite Laminates by the Element-Failure Method (opens in a new tab)

Page 1 of 4