Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 141 for “"Damage state"”.
-
Disaster recovery modeling for multi-damage state scenarios across infrastructure sectors
… time estimates by introducing mutually exclusive damage state modeling into the Graph Model for Operational Resilience (GMOR) and utilizing this capability for road recovery assessment in two case studies in the District of North Vancouver, British Columbia. The first case study also explores the …
-
Determining the Damage State of the Electrical Distribution System Following an Earthquake
… the distribution system with the probability of damage state the component is in.
-
Early Damage State Criterion from a Fault-Seeded Helicopter Gear Using Acoustic Emission and Neural Networks
… seconds or ~83 hours and culminates to a damage state such that a flaw has initiated on both ends of the EDM notch. AE data was analyzed for three separate channels which span a wide range of amplitude thresholds using clustering methods and verification algorithms developed at the …
-
Aerodynamic Analysis of Damage State Missiles using Overset Meshing Techniques for Application to Computational Fluid Dynamics Simulation
… of aircraft after sustaining structural damage to critical components. Flight survivability and controllability are key areas of concern when designing fault-tolerant flight control systems to handle a wide range of potential scenarios. However, there is a lack of research on the impact …
-
Probabilistic assessment of damage states using dynamic response parameters
… inference rule to evaluate the probability of damage in structures, using measured modal parameters and a set of possible damage states. The hypothesis is that observed changes in dynamic characteristics are due to damage accumulation over time. The main objective is to identify the most likely …
-
Semi-rigid steel frames subjected to mainshock-aftershock earthquake sequences
… result, vulnerability of structures to extensive damage and complete collapse as a result of the aftershocks increases. In spite of their in evaluating the true risk of system failure and collapse, the inclusion of aftershocks in code provisions and guidelines for seismic risk assessment and …
-
Automated damage assessment of reinforced concrete columns for post-earthquake evaluations
An automated method in damage state assessment of reinforced concrete columns for the purpose of establishing a rapid and quantitative post-earthquake safety and structural evaluation procedure is proposed. Several techniques from the fields of computer vision and image processing are employed in …
-
Investigating the response of steel structure to multi-axis, long duration blast and thermal loading
… duration blast waves can result in significant damage to a multitude of compression elements, potentially leading to total structural collapse. Current guidelines provide simple empirical methods for estimating peak response and damage state of a column to blast loading. These methods neglect …
-
Enhanced Understanding of Disaster Response and Community Resilience and Robustness via Machine Learning Strategies
… of a novel real-time pre- and post-hurricane damage classification meta-model framework. Currently, there are few ways to obtain pre-event damage state predictions for a specific hurricane event and structure. Further, following an event, damage inspections must be manually performed by teams …
-
Model-based structural damage identification using vibration measurements
… monitored with a set of embedded sensors. Damage identification is the part of a SHM system, in which the damage state of the structure is determined from obtained measurements. More specifically, the presence of damage is detected, and its location and severity are estimated. Even if the …
-
Development of a statistical relationship between ground-based and remotely-sensed damage in windstorms
… In the past, ground-based surveys of windstorm damage were frequently performed with the aid of aerial photographs in some cases. Researchers have recently begun using remote-sensing data such as digitized satellite, aerial, and LIDAR imagery to assess damage following natural and man-made …
-
Cascaded Deep Learning Network for Postearthquake Bridge Serviceability Assessment
Damages assessment of bridges is important to derive immediate response after severe events to decide serviceability. Especially, past earthquakes have proven the vulnerability of bridges with insufficient detailing. Due to lack of a national and unified post-earthquake inspection procedure for …
-
Investigation of implantation damage in aluminum gallium arsenide/gallium arsenide heterostructures using ion channeling and transmission electron microscopy
The implantation damage behavior of GaAs/Al$\sb{0.6}$Ga$\sb{0.4}$As multilayer structures has been investigated by implanting samples with 1 MeV Kr$\sp+$, 1.5 MeV Kr$\sp+$, 1 MeV Ar$\sp+$, and 1.5 MeV Kr$\sp{++}$ at 77 K. The resulting damage state was analyzed using low-, room-, and …
-
Characterization of early-stage material damage in cement-based materials using nonlinear ultrasound
… ability to nondestructively characterize their damage state, and thus reducing rehabilitation costs, and enhancing public safety. A critical step in achieving this goal is the ability to monitor microcrack development, since these microscale defects directly affect the early-stage material …
-
Nonlinear Ultrasonic Techniques for the Quantification of Thermal Damage in Carbon/Carbon Composite Material
… focuses on identifying thermal and oxidative damage induced by heat cycles during the lifespan of the material. Carbon/Carbon friction materials are subject to high service temperatures in air and thus susceptible to rapid oxidation damage [1], leading to a reduction in their mechanical …
-
Analytical study on upgrading the seismic performance of nominally ductile RC frame structures using different rehabilitation techniques
… described by designating the maximum allowable damage state index for an identified seismic hazard level. Overall lateral deflection, ductility demand, and inter-storey drift are the most commonly used damage state indices. The objective of this study is to analytically investigate the …
-
Advanced methods for performance-based seismic loss assessment and their application to a base isolated and conventional office building
… to estimate mutually exclusive and simultaneous damage state probabilities including allowance for grouping effects; (b) an informative prior for the Straub and Der Kiureghian (2008) method that can be employed to avoid the simulation of fragility curves with failure probabilities that conflict …
-
Quake-OVUDA: Component-Level AI-Based Post-Earthquake Building Inspections with Vision–Language Guided Unsupervised Domain Adaptation
… segmentation of building components and their damage states is a critical step toward automating structural inspections in the aftermath of disasters. A key challenge towards training deep neural networks for these tasks is the manual development of large, annotated datasets for the real world. …
-
Seismic Performance of Reinforced Concrete Walls Designed for Ductility
… designed to these provisions at ultimate limit state and at preceding damage states remained uncertain. To investigate the damage progression and deformation capacity of RC walls designed to modern structural code provisions, an experimental program was undertaken on four walls designed with …
Page 1 of 8