Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 54 for “"Decarburization"”.

  1. Decarburization and welding of gray cast iron

    Includes bibliographical references.

    colo-mines Repository record for Decarburization and welding of gray cast iron (opens in a new tab)

  2. Decarburization of gray cast iron for welding

    Includes bibliographical references.

    colo-mines Repository record for Decarburization of gray cast iron for welding (opens in a new tab)

  3. Decarburization of gray cast iron for welding

    Includes bibliographical references.

    colo-mines Repository record for Decarburization of gray cast iron for welding (opens in a new tab)

  4. ARGON-OXYGEN DECARBURIZATION OF HIGH MANGANESE STEELS

    … losses at high temperatures. Argon Oxygen Decarburization (AOD) is a promising candidate for the refining of high manganese steels. This work has studied the kinetics of decarburization and manganese losses during the argon oxygen bubbling into a wide range of iron-manganese-carbon alloys. …

    mcmaster Repository record for ARGON-OXYGEN DECARBURIZATION OF HIGH MANGANESE STEELS (opens in a new tab)

  5. Decarburization of iron-carbon alloys with oxidising slags.

    -4 cm/sec at 1400°C. It has notbeen possible to establish a precise correlationfor the mass transfer coefficients with the simple models formass transfer proposed by other authors. The generation ofcarbon monoxide gives rise to a situation which is very complex to describe in terms of …

    sheffield-hallam Download PDF for Decarburization of iron-carbon alloys with oxidising slags. (opens in a new tab)

  6. Functionally Graded Martensitic Stainless Steel Obtained Through Partial Decarburization

    … of obtaining materials with superior properties. Decarburization has been used in other steels to create graded materials. These materials offer high strength and improved ductility when compared homogeneous materials of the same type. In this thesis, graded martensitic stainless steel was …

    mcmaster Repository record for Functionally Graded Martensitic Stainless Steel Obtained Through Partial Decarburization (opens in a new tab)

  7. Effect of decarburization on the bendability of martensitic steel, The

    … steels. This study determined the effect of decarburization on the bendability of cold rolled martensitic (CRM) 1500 and press hardenable steel (PHS) 2000, with the numeric designation of each grade representing the minimum as received (AR) UTS in MPa. Decarburization was completed in a box …

    colo-mines Repository record for Effect of decarburization on the bendability of martensitic steel, The (opens in a new tab)

  8. Decarburization Kinetics of Fe-C-S Droplets in Oxygen Steelmaking Slags

    … play a significant role in the global furnace decarburization kinetics in oxygen steelmaking. In recent years, the important interaction between droplet generation rate, droplet residence time in slag and droplet decarburization rate has become more evident in the literature. The …

    mcmaster Repository record for Decarburization Kinetics of Fe-C-S Droplets in Oxygen Steelmaking Slags (opens in a new tab)

  9. FUNDAMENTAL STUDY OF DECARBURIZATION BEHAVIOR OF LIQUID Fe-C DROPLETS IN OXIDIZING SLAG

    … area. The bloating behavior is determined by the decarburization kinetics. This work aims to develop fundamental understanding of the bloating phenomena through series of experiments and mathematical modeling to explore various factors affecting the kinetics of decarburization. An experimental …

    mcmaster Repository record for FUNDAMENTAL STUDY OF DECARBURIZATION BEHAVIOR OF LIQUID Fe-C DROPLETS IN OXIDIZING SLAG (opens in a new tab)

  10. Decarburization of an Iron-0.8% Carbon Alloy in the Presence of a Wustile Scale

    <p>The kinetics of the oxidation and decarburization of an iron-0.8% carbon alloy in carbon dioxide at 950°C have been studied. Both processes are controlled by surface reactions. Decarburization through the wustite scale has been studied by allowing oxide reduction by carbon to proceed under …

    mcmaster Repository record for Decarburization of an Iron-0.8% Carbon Alloy in the Presence of a Wustile Scale (opens in a new tab)

  11. Oxidation and Decarburization Kinetics of Iron-Carbon Alloys in Carbon dioxide - Carbon Monoxide Atmospheres

    In this thesis, the results of oxidation and decarburization experiments with pure iron-carbon alloys over the temperature range 800 - 950ºc, and in atmospheres of varying carbon monoxide - carbon dioxide ratio are reported. Most of the experimental work is concerned with a 1.065 weight percent …

    mcmaster Repository record for Oxidation and Decarburization Kinetics of Iron-Carbon Alloys in Carbon dioxide - Carbon Monoxide Atmospheres (opens in a new tab)

  12. Using FDM and FEM to simulate the decarburization in AISI 1074 during heat processing and its impact

    … metallurgical processes. One such process is the decarburization of steel. Because of the importance of the microstructure on the mechanical properties, changes in the near surface properties are affected by the loss of carbon in the alloy. The topics investigated in this thesis include a variety …

    gatech Repository record for Using FDM and FEM to simulate the decarburization in AISI 1074 during heat processing and its impact (opens in a new tab)

  13. A Study of Decarburization in SAE 1042 Steel: Its Effect on Fatigue Life, Tensile Properties, and Fatigue Fractography

    … to determine the effects of-increased surface decarburization on the fatigue life of SAE 1042 steel. This test was conducted on three series of test specimens: (1) specimens having no surface decarburization (series D-1), (2) specimens having a 0.038 inch (0. 97 mm) decarburized surface layer …

    ut-knoxville Repository record for A Study of Decarburization in SAE 1042 Steel: Its Effect on Fatigue Life, Tensile Properties, and Fatigue Fractography (opens in a new tab)

  14. DEPHOSPHORIZATION KINETICS FOR REACTION OF BLOATED METAL DROPLETS WITH OXIDIZING SLAG

    … and is linked in a rather complex way to the decarburization of droplets in the gas-slag-metal emulsion zone. Decarburization affects dephosphorization of metal droplets by influencing the following: residence time, driving force and mass transfer of phosphorus. Residence time is the contact …

    mcmaster Repository record for DEPHOSPHORIZATION KINETICS FOR REACTION OF BLOATED METAL DROPLETS WITH OXIDIZING SLAG (opens in a new tab)

  15. ALLOYING ELEMENT SEGREGATION AND ITS EFFECT ON THE AUSTENITE TO FERRITE TRANSFORMATION

    Controlled decarburization experiments were carried out on ternary and quaternary iron alloys. The planar ferrite interfaces formed during decarburization were subsequently investigated using atom probe tomography (APT) to measure interfacial segregation. The segregation results for the Fe-Si-C, …

    mcmaster Repository record for ALLOYING ELEMENT SEGREGATION AND ITS EFFECT ON THE AUSTENITE TO FERRITE TRANSFORMATION (opens in a new tab)

  16. Fundamental Studies of Hydrogen Attack in C-0.5Mo Steel and Weldments Applied in Petroleum and Petrochemical Industries

    … hydrogen attack (HTHA) is a form of surface decarburization, internal decarburization, and / or intergranular cracking in steels exposed to high temperature (> 400°F) and high hydrogen pressure. Hydrogen attack is an irreversible process which can cause permanent damage resulting in …

    utk-theses Repository record for Fundamental Studies of Hydrogen Attack in C-0.5Mo Steel and Weldments Applied in Petroleum and Petrochemical Industries (opens in a new tab)

  17. Studies of High Temperature Hydrogen Related Damage in Welded Carbon Steel Components used in Refineries

    … traditionally accepted HTHA morphology, i.e. no decarburization, no residual methane, and no evidence of cavitation were observed adjacent to crack areas. Cracking in these two components showed a mixture of intergranular and transgranular cracking morphology. No evidence of cracking or …

    ut-knoxville Repository record for Studies of High Temperature Hydrogen Related Damage in Welded Carbon Steel Components used in Refineries (opens in a new tab)

  18. On the investigation of coating characteristics within the experimental domain imposed by inner-diameter HVOF process

    … particle size distribution has an effect on the decarburization phenomena within the coating during the deposition process. For each produced set of samples, the goal was to establish relations between the highest temperature reached during the deposition process and the sample’s properties. …

    ets-quebec Download PDF for On the investigation of coating characteristics within the experimental domain imposed by inner-diameter HVOF process (opens in a new tab)

Page 1 of 3