Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Deck Overhang"”.
-
Bridge Deck Overhang Design: Vehicle Impact Load Effects, Ultimate Strength, and Implications on Bridge Rail Performance
… through the railing and inward through the deck overhang to the primary superstructure elements. In this research effort, design demands for deck overhangs supporting concrete railings were characterized using physical testing and complementary modeling in LS-DYNA. Physical test and modeling …
-
Analysis method for the design of reinforced concrete bridge barrier and cantilever deck under railing loads as specified in CAN/CSA-S6-00 (Canadian highway bridge design code)
… concrete bridge parapets and cantilevered decks so that such a method could be easily applied in practice against railing loads, as specified in the CAN/CSA-S6-00 Canadian Highway Bridge Design Code. The maximum moment dispersal angle (MMDA) is the most promising overall of the methods …
-
Bridge Rail Design Procedure
… capacity of bridge rails and cantilevered deck systems based on dynamic strength of concrete, and including the contribution of deflection of deck overhang, moment of inertia of the barrier and deck overhang sections, and mass of the vehicle and barrier and (2) Identifying appropriate …
-
Levels of lateral flange bending in straight, skewed and curved steel I -girder bridges during deck placement
… steel I-girders are required to withstand deck overhang loads during construction. This is partially accomplished by checking the flexural limit states for constructibility given by AASHTO. These limit states ensure that the maximum flange bending stresses produced during construction do …
-
Bridge Girder Webs Subjected to Horizontal Loads
… practice in South Dakota involves suspending the deck finishing machine and the freshly poured deck overhang from temporary metal brackets. These brackets are attached to the webs of the exterior plate girders. When loaded during construction, the brackets transmit to the web a vertical shearing …
-
Live Load Test and Finite Element Model Analysis of a Box Girder Bridge for the Long Term Bridge Performance Program
… girder spacing, parapets, skew, continuity, deck overhang, and deck thickness affect the distribution factors of box girder bridges. This was done by creating approximately 40 finite element models and comparing the results to those obtained by using the AASHTO LRFD Specifications.
-
Precast concrete bridge barriers for accelerated bridge construction
… and two connection alternatives between the deck and precast barriers. In addition, a new connection between two adjacent prefabricated barriers is presented.</p> <p>One barrier to deck connection uses inclined reinforcing bars with threaded ends that get connected to bar splicers embedded in …
-
Behavior and design of U-shaped girder bridges supporting heavy railings and sound walls
… leading to underestimation of girder and overhang forces. This dissertation investigates the structural behavior of prestressed concrete (PSC) U-girder and steel tub girder bridges supporting heavy railing systems. Refined three-dimensional finite element FE models were developed to …
-
Use of Steel Fibres in Bridge Decks to Improve Serviceability and Reduce Top Mat Reinforcement Requirements
… to enhance the long-term performance of bridge deck slabs, which are highly susceptible to deterioration due to corrosion of conventional steel reinforcement. While glass fibre reinforced polymer (GFRP) bars offer corrosion resistance, their low stiffness often necessitates increased …
-
Cross-frame forces in a straight bridge with normal supports
… during construction of the concrete bridge deck when the non-composite steel girders must resist the entire construction load. The braces not only enhance the lateral-torsional buckling resistance of the girders, but are also necessary to resist the torsion applied to the girders due to the …
-
Dynamic Simulation of Concrete Barriers
… and analyses, by modeling the barrier and deck overhang from test level 1 through 6, in order to satisfy all criteria. The objective of this research is to perform analyses using the finite element method based upon the dynamic computer simulation (LS-DYNA) in order to propose five …
-
Effects of thermal loads on Texas steel bridges
… applied to the steel girders and concrete bridge deck on a simple twin box girder bridge located at the Ferguson Structural Engineering Laboratory in Austin, Texas. The data from the field monitoring and laboratory tests were used to validate a finite element model. Based on this model, a detailed …
-
Development and structural evaluation of the skewed Next Generation Texas Bridge Deck
The Next Generation Texas Bridge Deck was developed to eliminate overhang brackets and formwork by incorporating a prefabricated full-depth overhang into a partial-depth precast deck panel with the use of transverse steel lattice wire truss reinforcement. Although the Next Gen Deck offers clear …