Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 174 for “"Deflagration"”.

  1. Design and characterization of an air-breathing deflagration thruster

    An Air-Breathing Deflagration Thruster (ABDT) is developed to characterize the thrust performance in simulated Very Low Earth Orbit (VLEO) conditions. We start with a simple system of ODEs to define a thruster geometry with modular design and diagnostics that accurately enable measurement of thrust …

    texas Repository record for Design and characterization of an air-breathing deflagration thruster (opens in a new tab)

  2. Air-breathing magneto-deflagration thruster for very low Earth orbit

    An Air-Breathing Magneto-Deflagration Thruster is optimized for performance in Very Low Earth Orbit (VLEO) conditions (∼150 km to 400 km). It is shown that proper constraint over propellant gas dynamics and energy addition leads to the formation of an efficient deflagration wave, capable of …

    texas Repository record for Air-breathing magneto-deflagration thruster for very low Earth orbit (opens in a new tab)

  3. Battery Vent Gas Hazard Analysis and Building Deflagration Dashboard Development

    … Gas Hazard Analysis dashboard and the Building Deflagration dashboard. The Vent Gas Hazard Analysis dashboard summarizes key gas characteristics such as lower and upper flammability limits, laminar flame speed, and maximum over-pressure, which are essential in quantifying the overall hazard …

    texas Repository record for Battery Vent Gas Hazard Analysis and Building Deflagration Dashboard Development (opens in a new tab)

  4. Effect of Dust Dispersion and Morphology on Dust Deflagration Hazard

    Dust explosions have led to numerous fatalities, injuries and property loss. Standards (ASTM, ISO etc.) mention a 20 L or a 1 m^3 apparatus to measure explosion parameters. These standards assume the dust particle size distribution remains unaltered post-dispersion in these apparatus. Recent …

    tamu Repository record for Effect of Dust Dispersion and Morphology on Dust Deflagration Hazard (opens in a new tab)

  5. The Effects of Compressibility on the Propagation of Premixed Deflagration

    … of compressible effects on the stability of deflagration waves. Due to the quasi-isobaric nature of slow flames, compressible effects in laminar flames are usually neglected. Nevertheless, turbulent deflagrations may propagate at substantially higher speeds, suggesting that compressible …

    ottawa-retro Repository record for The Effects of Compressibility on the Propagation of Premixed Deflagration (opens in a new tab)

  6. Run-Up Distance From Deflagration to Detonation In Fast Flames.

    In the process of deflagration-to-detonation transition (DDT) in reactive gases, the flame typically accelerates first to the choked flame condition (known as a Chapman-Jouguet deflagration), where it propagates at the sound speed with respect to the product gases. Subsequently, the choked flame …

    ottawa-retro Repository record for Run-Up Distance From Deflagration to Detonation In Fast Flames. (opens in a new tab)

  7. Thermal characterization of CMC Materials subjected to Deflagration and Detonation process

    … of the material would be done under deflagration and detonation operating conditions. This study would pave the way for the development of new materials that are required for current operating engines such as gas turbine engines and rocket engines and will help in the development of …

    ucf Repository record for Thermal characterization of CMC Materials subjected to Deflagration and Detonation process (opens in a new tab)

  8. Characterization of Fast Flames for Turbulence-Induced Deflagration to Detonation Transition

    … for detonation initiation is turbulence driven deflagration to detonation transition (TDDT). The research experimentally explores the propagation dynamics demonstrated by fast deflagrated flames interacting with highly turbulent reactants. Fast flames produce extremely high turbulent flame …

    ucf Repository record for Characterization of Fast Flames for Turbulence-Induced Deflagration to Detonation Transition (opens in a new tab)

  9. Design and Optimization of a Deflagration to Detonation Transition (DDT) Section

    … the `traditional' combustion process called deflagration (subsonic combustion). An alternative form of combustion, detonation (supersonic combustion), can increase the thermal efficiency of the process by anywhere from 20 - 50%. Even though several authors have studied detonation waves since …

    embry-riddle Repository record for Design and Optimization of a Deflagration to Detonation Transition (DDT) Section (opens in a new tab)

  10. A Study of Deflagration To Detonation Transition In a Pulsed Detonation Engine

    … A practical method of detonation initiation is Deflagration-to-Detonation Transition (DDT), which describes the transition of a subsonic deflagration, created using low initiation energies, to a supersonic detonation. This thesis presents the effects of obstacle spacing, blockage ratio, DDT …

    gatech Repository record for A Study of Deflagration To Detonation Transition In a Pulsed Detonation Engine (opens in a new tab)

  11. Deflagration to Detonation Transition with Increased Reactivity of Iso-octane and Ethane Mixtures

    The deflagration to detonation transition (DDT) represents the most catastrophic explosion scenario, characterized by supersonic flame propagation, overpressure, and shock waves. This phenomenon poses significant safety risks to human safety and property damage particularly in fuel storage …

    whiterose Download PDF for Deflagration to Detonation Transition with Increased Reactivity of Iso-octane and Ethane Mixtures (opens in a new tab)

  12. Modeling and numerical simulation of deflagration-to-detonation transition in porous energetic materials

    An understanding of the deflagration-to-detonation transition (DDT) in porous energetic materials is important for various engineering applications. Safety issues for damaged explosives is one example. In this work, two topics related to multi-dimensional simulation of DDT in energetic materials …

    uiuc Repository record for Modeling and numerical simulation of deflagration-to-detonation transition in porous energetic materials (opens in a new tab)

  13. Fluidic Jet Turbulence Generators for Deflagration to Detonation Transition in Pulsed Detonation Combustors

    … required to effectively accelerate the turbulent deflagration flame front to detonation velocity in the shortest possible distance while using a single Jet in Cross Flow (JICF). Jets in crossflow, depending on orientation and momentum ratio, can induce two types of flow structures that propagate …

    embry-riddle Repository record for Fluidic Jet Turbulence Generators for Deflagration to Detonation Transition in Pulsed Detonation Combustors (opens in a new tab)

  14. Deflagration-to-Detonation Transition (DDT) for Methane-Hydrogen-Oxygen Mixtures in a Round Tube

    Experiments were performed to investigate flame acceleration and DDT in a long smooth polycarbonate tube with a 5.08-cm inner diameter for hydrogen-methane-oxygen mixtures. Test pressures ranged from 15-31 kPa; the upper limit being constrained by the strength of the tube. The main diagnostic was …

    queens Repository record for Deflagration-to-Detonation Transition (DDT) for Methane-Hydrogen-Oxygen Mixtures in a Round Tube (opens in a new tab)

  15. Deflagration-to-Detonation Transition (DDT) Studies: Effect of Non-Uniform Obstacle Distribution on DDT

    Most of the previous work has been guided towards the understanding of this phenomenon under a uniform obstacle distribution, i.e., same obstacle shape, blockage ratio, and gap between obstacles. However, industrial facilities lack this uniform obstruction arrangement. This research aimed to gain a …

    tamu Repository record for Deflagration-to-Detonation Transition (DDT) Studies: Effect of Non-Uniform Obstacle Distribution on DDT (opens in a new tab)

  16. Theoretical, computational and experimental analysis of the deflagration plasma accelerator and plasma beam characteristics

    … and the acceleration process is termed "“deflagration". Devices that operate below the threshold are called “over-fed" and the plasma undergoes a compressive energy conversion process termed "detonation". Over-fed (detonation) plasma accelerators add energy to the plasma through plasma …

    vt Repository record for Theoretical, computational and experimental analysis of the deflagration plasma accelerator and plasma beam characteristics (opens in a new tab)

  17. Laminar Deflagrated Flame Interaction with A Fluidic Jet Flow for Deflagration-To-Detonation Flame Acceleration

    The concept of the Pulse Detonation Engine (PDE) has been of interest for centuries. The issue was originally studied to understand flame propagation in mine shafts after explosions due to methane buildup. The flames would travel down the shafts, transitioning to turbulent flames due to the …

    odu Repository record for Laminar Deflagrated Flame Interaction with A Fluidic Jet Flow for Deflagration-To-Detonation Flame Acceleration (opens in a new tab)

  18. An experimental study of solid propellant deflagration using high speed motion pictures and postfire residue analysis

    Six aluminized propellants were investigated through strand burning in a windowed combustion bomb at 500 psi and 1000 psi. Postfire particle residues were analyzed with a scanning electron microscope and found to have bi-modal size distributions. The mean diameter of the fine particle distribution …

    nps Repository record for An experimental study of solid propellant deflagration using high speed motion pictures and postfire residue analysis (opens in a new tab)

Page 1 of 9