Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Deformed geometry"”.
-
Product Design and Simulation for Metal Binder Jetting - An investigation of sintering deformation and design compensation in Simufact Additive
… the process present one possible way to improve geometry when addressing and compensating for shrinkage and deformation. The Simufact Additive Binder Jet module, developed by Hexagon AB, uses a finite element analysis (FEA) simulation of the sintering process and material model to predict the …
-
Plane frame element addition to the MESS finite element program
… maximum tensile and average shear stress, and a deformed geometry plot. The element is tested for accuracy relative to simple beam theory and by comparison with results generated using another finite element program. In both cases agreement to within 6 significant figures was achieved. Because …
-
Ship hull plating weld misalignment effects when subjected to tension
… then shears off. FEA showed the importance of deformed geometry in promoting final fracture by slip from the toe of the weld in non-hardening material. Graphical results indicate that for a non-hardening material with an offset of 15% of the plate thickness, which is within current military …
-
MODELS FOR ASSESSMENT OF FLAWS IN PRESSURE TUBES OF CANDU REACTORS
… on small deformation theory and fixed crack geometry, which leads to singular stress and strain field at the crack-tip. The thesis presents new models for notch and crack induced stress fields based on the deformed geometry. In contrast with the classical solution based on small deformation …
-
Structural-Electromagnetic Simulation Coupling and Conformal Antenna Design Tool
… existing tools are not sufficient for generating deformed arrays necessary for determining in-flight array performance. In response to this need, a computer tool for analyzing antennas undergoing structural loads is developed. The Antenna Deformation Tool (ADT) has two primary uses: generating …
-
Physics Based Reliability Assessment of Embedded Passives
… dielectric and passive layers. Using the deformed geometry, the electrical characteristics have been determined at low frequency. In parallel to the models, test vehicle substrates have been subjected to 1000 thermal cycles between -55??o 125??nd high humidity and temperature conditions at …
-
A computational procedure for simulation of suction caisson behavior under axial and inclined loads
… using the ABAQUS/Standard computer program. The deformed geometry and state of the caisson-soil system obtained from axisymmetric simulation of the installation process are specified as initial conditions to carry out the three-dimensional analysis. The computed behavior of the caisson is …
-
Large-Scale Graphene Film Deposition for Monolithic Device Fabrication
… heat transfer in Ni thin film as well as deformed geometry module. In this particular research, the number of simulated graphene layers on Ni film was compared with experimental data. Also, the effect of many CVD parameters on graphene film fabrication is stated. In conclusion, a novel …
-
Numerical investigation of long-span wing drone aeroelastic behavior using Lattice Boltzmann method
… in cruise condition during the real mission. The geometry has been created with respect to the existing drone geometry, Bayraktar TB2. For the development of 3D geometry, we used OpenVSP, a software used to create aerospace geometries. The fluid model has been carried out and conducted with …
-
Parametric Study of Orthogonal Pantographic Lattice with Non-Linear Torsional Resistance at Pivots
… are used to analyze the stiffness of the deformed geometry behavior. Geometric nonlinearity is introduced to study the response for large deformation while a non-linear torsional spring expressed as a cubic polynomial function of relative beam rotations at connection nodes is utilized to …
-
Meshfree Modelling of Hyperelastic Mechanics
… in Eulerian setting to enable us to compute undeformed geometry when given a deformed geometry. We continue to use the enhanced/strengthen PPP stabilisation method in the VHW framework, so that the gradient correction scheme is encompassed naturally. We also showed that our Eulerian formulation …
-
Gradient-Based Optimization of Highly Flexible Aeroelastic Structures
… flexible aeroelastic structures. First, the deformed geometry must be the baseline for weight, structural, and stability analyses. Second, potential couplings between aeroelasticity and rigid-body dynamics must be considered. Third, dynamic analyses must be modified to handle large nonlinear …
-
Μεθοδολογία μοντελοποίησης σε μικροκλίμακα της κατεργασίας SLM με χρήση πεπερασμένων στοιχείων
… ablation was simulated by using deformable geometry, with the material recombination factor being the only coefficient that needs to be determined. It was concluded and proposed a linear correlation between the material recombination factor and the VED, while an exponential relation of the …