Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Delamination Detection"”.

  1. Delamination Detection in Concrete Using Disposable Impactors for Excitation

    Delaminations in concrete bridge decks result primarily from corrosion of the reinforcing bars (or rebar). This corrosion leads to volumetric expansion of the rebar. When the rebar expands, concrete cracks, and there is a localized separation of the concrete cover from the underlying concrete. …

    byu Repository record for Delamination Detection in Concrete Using Disposable Impactors for Excitation (opens in a new tab) Download PDF for Delamination Detection in Concrete Using Disposable Impactors for Excitation (opens in a new tab)

  2. Machine learning for Lamb wavebased delamination detection in composite structures

    … to complex failure mechanisms such as delamination, while conventional inspection and maintenance procedures are often expensive and time consuming. Structural health monitoring based on guided Lamb waves has therefore emerged as a promising approach for automated damage detection. This …

    chalmers Repository record for Machine learning for Lamb wavebased delamination detection in composite structures (opens in a new tab)

  3. Validating NDE Dataset And Benchmarking Infrared Thermography For Delamination Detection In Bridge Decks

    … model for bridge deck sub-surface delamination evaluations. The proposed method adopts the IRT dataset and annotated ground truth generated from the in-service bridge decks. The model was developed by iterating the sensitivity (s) parameter and optimized by selecting s-values based …

    nodak Repository record for Validating NDE Dataset And Benchmarking Infrared Thermography For Delamination Detection In Bridge Decks (opens in a new tab)

  4. High-Speed Apparatus and Signal Processing for Accoustic Delamination Detection on Concrete Bridge Decks

    … Internal cracking within bridge decks, known as delamination, is a particularly difficult defect to identify because it is often not detectable through visual inspection. State-of-the practice testing approaches involve the use of slow and subjective manual sounding techniques and costly lane …

    byu Repository record for High-Speed Apparatus and Signal Processing for Accoustic Delamination Detection on Concrete Bridge Decks (opens in a new tab) Download PDF for High-Speed Apparatus and Signal Processing for Accoustic Delamination Detection on Concrete Bridge Decks (opens in a new tab)

  5. Percussion-Based Single and Multi-Bolt Looseness Detection and Composite Plate Delamination Detection Using Machine Learning

    … method to apply machine learning in the detection of bolt looseness in flanged pipeline connections. A weld neck flange with eight bolts is examined under two test cases. In the first case, the objective is to identify a single loose bolt among eight, where seven bolts are torqued to 210 …

    houston Repository record for Percussion-Based Single and Multi-Bolt Looseness Detection and Composite Plate Delamination Detection Using Machine Learning (opens in a new tab) Embargoed until 2027-05-01

  6. Vibration based damage detection in composite structures using computational intelligence tools

    … research work deals with aspects concerned with delamination detection in composite structures as revealed by an approach based on vibration measurements. Variations in vibration characteristics generated in composite laminates indicate the existence of delaminations. This is because degradation …

    unsw Repository record for Vibration based damage detection in composite structures using computational intelligence tools (opens in a new tab)

  7. Detecting Delamination in Carbon Fiber Composites Using Piezoresistive Nanocomposites

    … different lightweight aerospace applications. Delamination is a critical failure mode in these composite materials. As composite plies separate from each other, the composite loses some of its ability for supporting expected loads. Therefore, detection of delamination at right time is a …

    embry-riddle Repository record for Detecting Delamination in Carbon Fiber Composites Using Piezoresistive Nanocomposites (opens in a new tab)

  8. Early age delamination in concrete pavements made with gravel aggregates

    … these pavements have been subject to early age delamination and eventual spalling damage. Therefore, a series of studies funded by TxDOT since the early 1990's has been conducted to gain a better understanding of mechanisms, material properties, and construction practices, and to provide …

    tamu Repository record for Early age delamination in concrete pavements made with gravel aggregates (opens in a new tab)

  9. Multi-Component Structural Health Assessment Using Guided Acoustic Waves

    … (plates, pipes and bars) are studied for damage detection with guided waves. Specific guided wave modes (also known as Lamb wave modes for plate type structures) are generated in a laminated aluminum plate for damage detection and quantification using a broad band piezoelectric transducer …

    arizona-thes Repository record for Multi-Component Structural Health Assessment Using Guided Acoustic Waves (opens in a new tab)

  10. Manufacturing and Fatigue Behavior of Thick Glass/Epoxy Composite Beams

    … was found to be an effective in-situ delamination detection method. A 20% reduction of initial load was taken as failure. The cross-ply specimens initiated delaminations more easily than unidirectional specimens. However, the cross-ply specimens had slower crack propagation rate. The …

    concordia Download PDF for Manufacturing and Fatigue Behavior of Thick Glass/Epoxy Composite Beams (opens in a new tab)

  11. Structural Identification and Damage Identification Using Output-Only Vibration Measurements

    … studied the structural identification and damage detection of civil engineering structures. Several issues regarding structural health monitoring were addressed. The data-driven subspace identification algorithm was investigated for modal identification of bridges using output-only data. This …

    utahstate Repository record for Structural Identification and Damage Identification Using Output-Only Vibration Measurements (opens in a new tab)

  12. Damage Detection and Self-Healing of Mode-I Fatigue Delamination in Thermoset CFRP Composites Using Thermoplastic Healants

    Delamination due to fatigue loading in laminated composites is difficult to detect, and therefore, could lead to catastrophic failure if left undetected. Hence, it is important to be able to detect and quantify the delamination crack growth behavior due to fatigue loading and explore methods to …

    alabama Repository record for Damage Detection and Self-Healing of Mode-I Fatigue Delamination in Thermoset CFRP Composites Using Thermoplastic Healants (opens in a new tab)

  13. Intelligent Non-destructive Measurement and Evaluation Techniques for Aircraft Composites

    … into four sub-researches: fuzzy logic based delamination detection, super-resolution image reconstruction for ultrasonic C-scan, ultrasonic 3D reconstruction, and polynomial fitting techniques for infrared thermography inspection. These researches focus on the improvement and optimization of …

    siu-theses Repository record for Intelligent Non-destructive Measurement and Evaluation Techniques for Aircraft Composites (opens in a new tab)

  14. Chipless RFID tag design, measurement, and sensing for nondestructive evaluation (NDE) applications

    … used in the measurement process, response detection approaches, and decoding techniques. Then, two different tag design approaches which provide for improved performance in identification (ID) applications, in terms of both increasing the amount of information that can be stored in a tag …

    iastate Repository record for Chipless RFID tag design, measurement, and sensing for nondestructive evaluation (NDE) applications (opens in a new tab)

  15. Free Vibration Analyses of Stationary and Rotating Tapered Composite Beams with Delamination

    … and Rotating Tapered Composite Beams with Delamination Puneet Jagpaul The exceptional engineering properties and customizability of the laminated composites have enabled their use in the design of the stationary and rotating tapered structures in the aerospace and energy sectors. The …

    concordia Download PDF for Free Vibration Analyses of Stationary and Rotating Tapered Composite Beams with Delamination (opens in a new tab)

  16. Scanning laser doppler vibrometry for strain measurement and damage detection.

    Numerous strain measurement and damage detection techniques have been developed over the last century. These techniques include strain gauges, digital image correlation, radiography and ultrasonic inspections. All have various advantages, as well as disadvantages, which make each suited to specific …

    adelaide Repository record for Scanning laser doppler vibrometry for strain measurement and damage detection. (opens in a new tab)

  17. Damage Detection in Tubular Structures Using Nonlinear Ultrasonic Guided Waves

    … performance. Particularly, incipient damage detection is significant because minor defects, if left unaddressed, can progressively worsen and ultimately lead to catastrophic failures. By employing effective techniques to identify the early-stage damage promptly and accurately, maintenance and …

    adelaide Repository record for Damage Detection in Tubular Structures Using Nonlinear Ultrasonic Guided Waves (opens in a new tab)