Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Delamination Failure"”.
-
Investigating delamination behavior of curved post-tensioned concrete structures
The wall delamination failure of a containment structure at a Florida nuclear power facility was attributed to improper de-tensioning sequence and low quality concrete. Few analytical investigations have shown that the delamination failure could not have been predicted due to a lack of knowledge on …
-
Experimental investigation of the delamination behavior of curved post-tensioned concrete structures without through-thickness reinforcement
The recent delamination failure of the concrete containment structure wall at the Crystal River Unit 3 Nuclear Power Plant has led to increased interest in the mechanical behavior of curved post-tensioned structures. Extensive investigations have been performed to identify the causes of the …
-
Electro-mechanical behaviour of indium tin oxide coated polymer substrates for flexible electronics
… were monitored in situ. Cracking and buckling delamination failure modes were observed for all samples investigated at critical strains raging from 2.8 to 3.4%, and from 7.0 to 8.0%, respectively. The results showed that the dominant critical failure mode depends on the applied stress …
-
Experimental and Numerical Study of Mode II Delamination in Laminated Composite Beams
… and flexibility in design. However, delamination damage, which reduces the strength and stiffness of the material, is common and often difficult to detect during inspection. The integration of delamination failure considerations into the design and analysis process is of the utmost …
-
Finite element-based failure models for carbon/epoxy tape composites
… However the difficulty to capture structural failure phenomena is a significant barrier to more extensive use of laminated composites. Predictions are challenging because matrix (resin) dominated failure mechanisms such as delaminations and matrix cracking contribute to the structural failure …
-
Progressive damage and failure of unidirectional fiber reinforced laminates under impact loading with composite properties derived from a micro-mechanics approach
… damage initiation, damage progression, and failure of 16-ply unidirectional fiber reinforced laminates impacted at normal incidence by a rigid sphere. The damage is assumed to initiate when at least one of Hashin's failure criteria is satisfied with the evolving damage modeled by an …
-
Composite flange design - Conceive a novel flange design focused on stiffness
… interlaminar stresses can trigger delamination failure in the radii. The project is structured around three stages: a comparison of three geometric design iterations to identify the normalised stiffest design, the simulation of a physical test replicating real boundary conditions, …
-
Application of commercial FEM program Abaqus to investigate delamination behavior of post-tensioned concrete curved walls
The concrete delamination induced by prestressing forces is a potential problem of post-tensioned concrete containments with curved geometry. To investigate the concrete delamination mechanism, the researchers of the University of Texas at Austin completed an experimental research project in 2017. …
-
Nanoscale reinforced laminated nanocomposite materials systems for high-performance structural applications
… main disadvantage of using composites is their delamination failure that occurs due to poor interlaminar properties because of a lack of reinforcement through the thickness direction. One of the unique ways to address this problem in traditional composites is the use of nanoscale reinforcements …
-
Numerical Methods for Predicting the Dynamic Crushing Response and Energy Absorption of Composite Aluminum Honeycomb Sandwich Structures
… sheets partially bonded to the core. The failure modes for each sandwich structure were previously shown through research and the elastic region of the response was checked for accuracy using a simple beam theory. The analysis suggests that incorporating unbonded zones into the sandwich …
-
Exploration of incompatibility in Al-Li alloys using high energy diffraction microscopy and a crystal plasticity model
… and confounding mode of fracture termed ‘delamination.’ Delamination is a secondary form of fracture along flat grain boundaries that initiates as a result of highly localized deformation. Currently, designers are reluctant to use Al-Li in structural applications due to concerns over the …
-
Proton Exchange Membrane Fuel Cell Systems Based on Aromatic Hydrocarbon and Partially Fluorinated Disulfonated Poly(Arylene Ether) Copolymers
… provides for better long term performances. A delamination failure mechanism was proposed for the hydrocarbon membrane electrode assemblies (MEA) due to the large difference between water uptake of the catalyst layer and membrane and this was verified by a reduction in high frequency resistance …
-
Adhesion characterisation of bonded steel/composite cleavage joints
… marine, construction, and automotive industries. Failure of such connections normally arises from cleavage stresses. This study is largely experimental with theoretical aspects. The overall aims and objectives are: to improve the understanding of local cleavage strength and failure of bonded steel …
-
Strengthening Shear Deficient Thin-Walled Steel Beams by Bonding Pultruded GFRP Sections
… The experimental tests showed that the global failure mechanism was mainly controlled by the debonding of adhesive layer. Therefore, failure modes and phase angles were investigated for the GFRP/steel interface. Local traction-separation laws for Mode I and Mode II failure modes were determined …
-
Local Water Slamming of Nonlinear Elastic Sandwich Hulls, and Adiabatic Shear Banding in Simple Shearing Deformations of Thermoelastoviscoplastic Bodies
… zone model with stress based criterion for delamination initiation and energy based relation for complete separation is used to analyze delamination failure in a beam under mixed-mode loading. We have studied transient post-buckling deformations and delamination progression in an axially …
-
Compressive Response of Tapered Curved Composite Plates
… applications. In the present thesis, the ply failure and global buckling failure of internally-tapered curved laminates are considered. For the buckling analysis, four different analytical approaches are employed: (1) classical shell theories using Ritz method, (2) first-order shear …
-
Random delamination of graphite/epoxy laminated composites : stress analysis, failure criteria, experimental characterization and stochastic modeling
The delamination failure of laminated composites exhibits two distinct characteristics; (1) the corresponding failure strengths display considerable scatter, and (2) the morphologies of the fracture surfaces and the interlaminar strengths are dependent on the magnitude of the fiber orientation …
-
FE Analyses of Corrosion-Damaged RC Beams Strengthened with FRP Components
… added to the beams along with the FRP plate, the failure at the FRP plate end close to the supports was prevented, and some additional load-bearing capacity was obtained. However, the increase in load-bearing capacity varied due to factors such as the beam geometry as well as the arrangement, …
-
Investigation of Geomechanical Behavior of Laminated Rock Mass Through Experimental and Numerical Approach
Roof failure in the Appalachian underground coal fields occurs often in laminated shale. Laminated shale roof in coal mines fails in unique ways, such as cutter failure or delamination failure. Extensive studies have investigated the influential factors that cause laminated roof failure, which …
-
Development and validation of a high-velocity soft-body impact test method for through-thickness reinforced composite structures
… However, such structures are very susceptible to delamination failure in the event of high-velocity impact by a foreign object. This is particularly important for aerospace components where foreign-object damage (FOD) can lead to catastrophic failure of a component due to the low composite …
Page 1 of 2