Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 198 for “"Delaminations"”.
-
Assessment of Delaminations in Composite Laminates using Vibration Monitoring
… weight. Timely detection and assessment of delaminations in composite laminates is therefore critical, as they can cause loss of structural integrity affecting the safe operation of the aircraft. Traditional NDI methods are time consuming and expensive since they require aircraft to be …
-
Vibration, buckling and postbuckling of laminated composites with delaminations
… of laminated composite plates with multiple delaminations are presented. A fInite element method based on a layer-wise laminated composite plate theory is developed to formulate the problem. Geometric nonlinearity in the sense of von Karman and the imperfection in the plate in the form of …
-
Instability-related delamination growth of embedded and edge delaminations
Compressive loads can cause local buckling in composite laminates that have a near-surface delamination. This buckling causes load redistribution and secondary loads, which in turn cause interlaminer stresses and delamination growth. The goal of this research effort was to enhance the understanding …
-
Effects of crack arresting delaminations in aluminum-lithium alloys
Made available in DSpace on 2010-05-19T18:38:20Z (GMT). No. of bitstreams: 4 Hernquist_Thesis_opt.pdf: 6706271 bytes, checksum: bed37ee45a2aaa5b5dd1b76036d9d235 (MD5) final thesis.docx: 53203185 bytes, checksum: 4f9e95020501b4b07c3e54b80d49fe55 (MD5) Hernquist_Mark.pdf: 6707593 bytes, checksum: …
-
A parametric study of delaminations in an aluminum-lithium alloy
… the forefront of aerospace materials research. Delaminations in these alloys play a significant role in their fracture processes. Therefore, a more complete understanding of the factors that influence the behavior of these delaminations and their corresponding effect on the primary crack …
-
Modeling of pulse-echo inspections of multi-layer panels containing delaminations
<p>To meet the needs of counter insurgency operations the armor of tanks need to be lighter. This is accomplished by using a combination of materials: metals, composites, and ceramics. This multi-material composite armor using any combination of the above materials will need to be inspected for …
-
Non-Destructive Methods for the Detection of Delaminations in Concrete Bridge Decks
To detect delaminations in concrete bridge decks, the non-destructive techniques (NDT) permit a frequent inspection of the slabs without damaging the structures. Within this study, twelve samples were realized, presenting diverse horizontal defects simulating delaminations. They were scanned with …
-
Experimentally informed modeling of nonlinear wave propagation and phononic behavior in prescribed delaminations
Submission published under a 24 month embargo labeled 'Closed Access', the embargo will last until 2027-08-01
-
Evaluation of thermographic techniques for the detection of subsurface delaminations in concrete bridge substructures
This thesis presents both an analytical and an experimental evaluation of the feasibility of using infrared thermographic techniques to detect subsurface damage in concrete. Various methods of artificial heating, required to effectively apply this technique, are presented. Four major conclusions …
-
Calculation of energy release rates for delaminations in composite materials using phase shifting moire? interferometry
… developed to measure the energy release rate for delaminations in composite materials. The method can be used in cases where conventional methods may not be applicable, such as problems involving multidirectional laminates or arbitrary specimen geometry. The work involved the experimental and …
-
Effects of Defects on Composite Structures Load Carrying Capacity: Delaminations at a Bi-Material Interface
Kompozitní materiály se projevují komplexním způsobem porušování, které může být dále ovlivněno přítomností různých poruch plynoucích z výrobních processů nebo se vyskytujících v průběhu života součásti. Důkladné porozmění procesů porušování a jejich okolností je nezbytné pro navrhování …
-
Detection of Delaminations in Carbon Fiber Reinforced Polymers Embedded with Terfenol-D Particles Using Machine Learning
… specifically, fiber-reinforced polymers, delaminations form from the evolution of cracks in a matrix that leads to adhesion failure between adjacent laminae. Nondestructive evaluation (NDE) seeks to characterize the state of a material or system during non-operational times. A previously …
-
Experimental study of defects and delaminations produced in abrasive waterjet cutting and drilling of polymer matrix composite.
The purpose of the work reported in this thesis was to further the investigation of the problem of bending in a circular disk of variable thickness. Many difficulties were encountered in this research arising from the use of a new material for the photoelastic model, and it was necessary to …
-
Application of fracture mechanics to predict the growth of single and multi-level delaminations and disbonds in composite structures
… prediction of laminated composites containing delaminations located between arbitrary layers in the laminate, and to extend the investigations to composite structures subjected to barely visible impact damage (BVID). The advantages of fracture mechanics-based methodologies to predict …
-
Training and field verification for hand-held thermographic inspection technologies
… of thermal imaging for the detection of delaminations in bridge components. This research included field testing to validate inspection guidelines developed during earlier phases of the research which describe the necessary minimum environmental conditions for successful application of …
-
Processing of CerLOMed Si₃N₄ components
… α-Si₃N₄ to β-Si₃N₄ transformations. However, delaminations which are in form of gaps between adjacent layers were still observed within the fully mature microstructure. Microfocus x-radiography was used to identify that the CerLOM process was the origin of these delaminations. It is believed …
-
An experimental study to determine the reduction in ultimate bending moment of a composite plate due to an internal delamination.
… determine experimentally the effects of internal delaminations in a graphite -epoxy composite plate on the plate's ultimate bending moment. The experiments were conducted using 4-inch by 7-inch specimens with a balanced ±45 90 , 8-ply layup. The delaminations were created by inserting a thin …
Page 1 of 10