Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 45 for “"Densification process"”.
-
A systems analysis of biomass densification process
… energy intensive drying, grinding, and pelleting processes. In a typical operation, manufacturing one ton of dried pellets may use 300-3500 MJ for drying, 100-180 MJ for grinding, and 100-300 MJ for densification. The present study investigates the entire densification process using the systems …
-
Constitutive Modeling of the Densification Process of Ceramic Powders Subjected to Cold, Quasi-Static Pressing
… complete piece failure during successive processing. These issues contribute directly to a decrease in production efficiency through lost time and an increase in energy and material use. The careful control of the green body density field is of the utmost importance to consistently …
-
An analysis of the heating and densification process during rotational molding of a thermoplastic powder in a uniaxially rotating cylindrical cavity
… and theoretical investigation of the heating and densification portion of the rotational molding process in a uniaxial, cylindrical mold. A thorough literature survey is included which reviewed past analysis of the rotational molding process and other areas that assisted in understanding of the …
-
Influence of lateral boundaries in tapped densification of granular materials
… system undergoes when excited, also known as the densification process. This thesis investigates the densification process of a tapped granular system using Discrete Element Model (DEM) simulations. Contact interactions in the simulations obey a well-established inelastic soft-sphere model. The …
-
Synthesis of Amorphous Hydrogenated Boron Carbide from Orthocarborane Using Argon Bombardment: A Reaxff Molecular Dynamics Study
In this study, the synthesis process of a-BxC:Hy using argon bombardment from the orthocarborane precursor was modeled by using reactive molecular dynamics (MD). Utilizing the MD simulations, the formation of free radicals as a result of ion bombardment was identified and quantified. Then, the …
-
An evaluation of the Phoenix machine : a new apparatus for the in situ densification of soil
An in situ densification probe which employs the novel technique of simultaneous vibration and drainage has been developed by Phoenix Engineering for the purpose of in situ improvement of loose, granular soils. It is believed that pumping of water during the densification process offers improved …
-
CHARACTERIZATION OF INHERENT AND INDUCED ANISOTROPY IN GRANULAR MATERIALS
… anisotropy that is generated by the initial densification process, is described. The program involves a series of direct shear as well as triaxial axial tests. Its primary objective is to demonstrate that anisotropy may occur in sands that have nearly spherical particles (i.e. are typically …
-
Densification of permeable liquids and magmas
… treatment of the problem progresses from processes that affect single droplets and that can be explicitly constrained, such as heat and mass transfer and shape changes in volcanic droplets, before applying these concepts to arrays of many droplets and porous liquids in general. In testing …
-
Modification of thermally sprayed ceramic oxide coatings by chemical densification processing
… plasma-sprayed YSZ coatings by a novel chemical densification process. In this study, a two-layer system - consisting of atmospheric plasma-sprayed 8 wt% yttria-stabilized zirconia (8YSZ) as top coat and Ni-based alloy coatings as a bond coat - was used as a model system. In order to conduct the …
-
CHEMISTRY AND PROCESSING OF CARBON/CARBON COMPOSITES FROM FURAN-BASED POLYBENZOXAZINE RESINS
… an interconnected crack structure that enhances densification efficiency in polymer infiltration and pyrolysis (PIP) processing. PIP studies were conducted using composites prepared by resin transfer molding (RTM). Characterization of the void content and its distribution within pyrolyzed samples …
-
Effective elastic properties of two -dimensional solids with inhomogeneities of irregular shapes
… carbon---a matrix phase formed during a densification process by chemical vapor infiltration.
-
Feedstock and process variables influencing biomass densification
Densification of biomass is often necessary to combat the negative storage and handling characteristics of these low bulk density materials. A consistent, high-quality densified product is strongly desired, but not always delivered. Within the context of pelleting and briquetting, binding agents …
-
Étude des propriétés élastiques des verres d’oxydes sous haute pression : implications structurales
… in order to structurally better understand the densification phenomenon. Firstly the elastic anomaly was studied by Brillouin scattering experiments, was shown to progressively disappear with the densification. This progressive disappearance was interpreted in terms of a progressive structure …
-
Control of Metallurgical, Magnetic and Electrical Properties of Electrodeposited CoFeNi Thin Films and Cu Nanostructures
… to promote the grain growth via grain boundary densification process. The results indicate that this approach yields positive effect on the resistance of Cu interconnects. The drop in the resistance after annealing at 200°C and 250°C is observed for externally imposed compressive strain along …
-
HYPER-DENSE PUBLIC HOUSING SINGAPOREAN NEIGHBOURHOODS 2030 URBAN INFILLS AS A SUSTAINABLE DESIGN FOR HYPER DENSIFICATION
… existing residential blocks to address the densification process 3. Integrate the required facilities and amenities required for the new 2030 neighbourhood in Singapore. A strategy for new neighbourhood design that binds on to an existing neighbourhood to meet the density required for …
-
Sintering and grain growth of nonstoichiometric rutile.
… rate of weight loss, the grain growth and the densification. The weight loss measurements for reduction of rutile to two non-stoichiometric compositions of TiO₁.₉₂ and TiO₁.₉₈ yielded an activation energy for weight loss of 82 ± 2 kcal/mole. No attempt was made to identify the rate-determining …
-
Nacre-inspired ceramic-based composite materials via bi-directional freeze casting
… based on bi-directional freeze casting and densification process were employed to prepare nacre-like ceramic (alumina, zirconia and hydroxyapatite) scaffolds. Two densification methods, namely one-step and two-step method, were investigated to produce nacre-like ceramic scaffolds with …
-
Charge transport kinetics understanding and architecture design in thick electrodes for scalable high-energy/power batteries
… 1 introduces the essential electrochemical processes occurring within the battery electrode across diverse time and length scales. The complexity of a battery electrode system stems from the intertwined behaviors of electrons and lithium ions during charge storage. To unravel this, separate …
-
Development of sustainable and industrially viable wood-based advanced materials : enhancing functional and structural properties
… from petrochemicals or through energy-intensive processes (for instance, metal/alloys or concrete). Wood is an environmentally sustainable, benign, and high-performing green structural material readily available in nature which can be used to replace structural materials. However, insufficient …
-
Processing Trade-offs in a Cellulosic Biorefinery
… fermentable sugar from biomass. Biorefinery processing steps are interrelated and trade-offs between process parameters impact the cost and efficiency of the overall system. Although densified biomass as a biorefinery feedstock would improve biomass supply logistics, it has not been …
Page 1 of 3