Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 91 for “"Deposition Efficiency"”.

  1. Electrostatic spray deposition efficiency optimization

    … and noise, while providing an increase in fuel efficiency. Current methods of applying TOR-FM to tracks involve suspending the FM in a liquid, and either spraying the liquid onto the tracks from a moving train, or oozing it onto the track from a trackside location. An alternative application …

    ubc Repository record for Electrostatic spray deposition efficiency optimization (opens in a new tab) Download PDF for Electrostatic spray deposition efficiency optimization (opens in a new tab)

  2. DISPERSAL GRADIENTS AND DEPOSITION EFFICIENCY OF VENTURIA INAEQUALIS ASCOSPORES AND THEIR RELATIONSHIP TO LESION DENSITIES (APPLE SCAB DISEASE, SPORE DISPERSAL, TRAPPING)

    … Below that figure, there was no relationship.The deposition efficiency (percentage of area dose) of ascospores deposited on coverslips affixed to leaves in a glasshouse study was 3.8, 2.5, and 0.8% at wind speeds of 0.23, 0.45, and 0.89 m s('-1), respectively. The low number of lesions recorded in …

    unh-thes Repository record for DISPERSAL GRADIENTS AND DEPOSITION EFFICIENCY OF VENTURIA INAEQUALIS ASCOSPORES AND THEIR RELATIONSHIP TO LESION DENSITIES (APPLE SCAB DISEASE, SPORE DISPERSAL, TRAPPING) (opens in a new tab)

  3. Particulate laden spray deposition on moving surfaces

    … work has shown that TOR-FMs increase fuel efficiency of trains, reduces wear on rails, and reduce noise. Spraying liquid FM onto the rail surface and applying solid sticks of lubricant to the wheel surface are current methods of applying TOR-FMs. These methods present a variety of …

    ubc Repository record for Particulate laden spray deposition on moving surfaces (opens in a new tab) Download PDF for Particulate laden spray deposition on moving surfaces (opens in a new tab)

  4. Advancing Cold Spray for Additive Manufacturing: A Study on Particle Morphology, Gas Nature, and Particle Preheating

    … investigation aims to understand and improve the deposition quality and rates of cold spray for additive manufacturing in a way that is economically sound and without the detrimental temperature effects seen in traditional metallic additive manufacturing processes. It focuses on materials that are …

    ottawa-retro Repository record for Advancing Cold Spray for Additive Manufacturing: A Study on Particle Morphology, Gas Nature, and Particle Preheating (opens in a new tab)

  5. Effect of impact angle on deposition of LiNbO₃ films by micro-cold spray

    … to thicknesses of 5 [micrometers] because the deposition efficiency decreases with film thickness. Experimentally, the radial velocity can be controlled by varying the substrate angle up to 60° from the axial position. We have performed complimentary multi-physics modeling to determine the …

    texas Repository record for Effect of impact angle on deposition of LiNbO₃ films by micro-cold spray (opens in a new tab)

  6. Potassium behaviour during combustion of wood in circulating fluidised bed power plants

    … was removed during the soot-blowing period. The deposition efficiency correlated clearly with the ash-particle size. The largest particles, including alkali silicates, were deposited most effectively, and the deposition efficiency decreased with decreasing particle size. The deposition efficiency …

    aalto Repository record for Potassium behaviour during combustion of wood in circulating fluidised bed power plants (opens in a new tab)

  7. Flash Boiling Atomization of Suspension for Application of Suspension Plasma Spraying

    … a coating. SPS has lower solid feed rates and deposition efficiency compared to other thermal spray techniques. Increasing particle concentration in the suspension can enhance the feedstock deposition rate, but high viscosity and nozzle clogging are issues. To address these issues, this study …

    concordia Download PDF for Flash Boiling Atomization of Suspension for Application of Suspension Plasma Spraying (opens in a new tab)

  8. Deposition of aerosols in cylindrical tubes and in human lung airways

    Aerosol transport and deposition is of interest in many industrial and medical applications. This research is focused on two specific topics: deposition of aerosols in cylindrical tubes with emphasis on thermophoresis and deposition in real human lung airways. A numerical technique and a CFD code …

    missouri Repository record for Deposition of aerosols in cylindrical tubes and in human lung airways (opens in a new tab)

  9. Powder Recycling for the Production of Pin Fin Heat Sinks by Cold Gas Dynamic Spray

    … of reduced spray parameters, there is reduced deposition efficiency, resulting in a fair portion of the feedstock powder being wasted. This work aims to demonstrate the feasibility of using powder recycling to mitigate this issue and compares coatings sprayed with reclaimed powder to their …

    ottawa-retro Repository record for Powder Recycling for the Production of Pin Fin Heat Sinks by Cold Gas Dynamic Spray (opens in a new tab)

  10. COLD SPRAY OPTIMIZATION VIA MACHINE LEARNING

    … Other prints were pure AA6061 or AA7075. Highest deposition efficiencies for the materials varied from 3.63% using AA7075 (80%) and Al_2 O_3 (20%) to 43.62% using pure AA6061. Pure AA7075 reached 33.72% deposition efficiency. The selected parameters for every material and print were fed into a …

    nps Repository record for COLD SPRAY OPTIMIZATION VIA MACHINE LEARNING (opens in a new tab)

  11. Consolidation of Cermet Coatings by Cold Gas Dynamic Spraying

    … wear resistant coating is required. During the deposition of these coatings, researchers have shown that the ceramic particles have a dramatic influence on the deposition behavior by causing an increase in deposition efficiency and coating adhesion. These effects have been presented in several …

    ottawa-retro Repository record for Consolidation of Cermet Coatings by Cold Gas Dynamic Spraying (opens in a new tab)

  12. An Investigation of Flow-Limited Field-Injection Electrostatic Spraying (Ffess) and Its Applications to Thin Film Deposition

    Deposition of TiO2 and silver thin films using multi jet FFESS is studied, demonstrating great control on film morphology and properties. TiO2 thin films deposited on high-intensity discharge arc lamps are found to improve the quality of its light output. Silver thin films of high purity and …

    uiuc Repository record for An Investigation of Flow-Limited Field-Injection Electrostatic Spraying (Ffess) and Its Applications to Thin Film Deposition (opens in a new tab)

  13. Systematic evaluation of different approaches for modelling inhaled particle deposition in the lung airways

    … algebraic model utilized to predict the particle deposition in the lung airway geometry. Prediction of particle deposition is an essential part of the drug discovery and manufacturing process. The accuracy of the typical path algebraic model is to be verified and quantified to establish the …

    chalmers Repository record for Systematic evaluation of different approaches for modelling inhaled particle deposition in the lung airways (opens in a new tab)

  14. RAPID PROTOTYPING OF NANOSTRUCTURES WITH ELECTRON BEAM INDUCED PROCESSING

    … fabrication technique that allows the direct deposition of functional materials. However, it suffers from significant drawbacks, such as high cost, low speed, unavailable precursors for many materials and low purity of deposits. Liquid-phase focused electron beam induced processes (LP-FEBIP) …

    uky-thes Repository record for RAPID PROTOTYPING OF NANOSTRUCTURES WITH ELECTRON BEAM INDUCED PROCESSING (opens in a new tab)

  15. Laser assisted cold spray of ferritic alloys: oxide dispersion strengthened fe91ni8zr1 and aisi 4340 steel

    … high-powered laser irradiated the surface of the deposition area making the substrate surface thermally softer promoting deposition. In situ laser heating of the substrate increased the deposition efficiency of the high strength 4340 steel from 48 % to 72 %. The increased surface temperature from …

    alabama Repository record for Laser assisted cold spray of ferritic alloys: oxide dispersion strengthened fe91ni8zr1 and aisi 4340 steel (opens in a new tab)

  16. A Numerical Study of Supersonic Rectangular Jet Impingement and Applications to Cold Spray Technology

    … that determine the success of particle deposition. Depending on the particle diameter and density, interactions of particles with the turbulent supersonic jet and the compressed gas region near the substrate surface can have significant effects on particle velocity and temperature. …

    vt Repository record for A Numerical Study of Supersonic Rectangular Jet Impingement and Applications to Cold Spray Technology (opens in a new tab)

  17. Processing-microstructure-property relations in high pressure cold spray of AA2024 and AA7075

    … relationships is needed and improvements to deposition characteristics, microstructure and mechanical properties are necessary for successful application. This dissertation examines four aspects of the cold spray process applied to AA2024 and AA7075. First the effects of processing parameters …

    alabama Repository record for Processing-microstructure-property relations in high pressure cold spray of AA2024 and AA7075 (opens in a new tab)

  18. A comparative study between high potency dry powder inhalation and nebulized solution of vancomycin hydrochloride for lung delivery

    … of this research was to compare the in vitro deposition efficiency and efficacy of dry powder inhalations and nebulized solutions of vancomycin hydrochloride. Dry powder inhalations of vancomycin hydrochloride were prepared by spray drying solutions of VH in water at different concentrations …

    creighton Repository record for A comparative study between high potency dry powder inhalation and nebulized solution of vancomycin hydrochloride for lung delivery (opens in a new tab)

  19. Optimizing the Cold Spray Process Performance: Influence of the Initial Substrate, Coating, and Particle Impact Temperatures

    … provided in this thesis are valid for the deposition of aluminum-on-Ti-6Al-4V and Inconel718-on-Ti-6Al-4V. To increase and control the initial substrate and coating temperatures while ensuring proper decoupling of other spray parameters, an induction heating system is used with the CS …

    ottawa-retro Repository record for Optimizing the Cold Spray Process Performance: Influence of the Initial Substrate, Coating, and Particle Impact Temperatures (opens in a new tab)

  20. DESIGN OF AN EFFICIENT AND RAPID CHEMICAL VAPOR INFILTRATION (CVI) RE-CIRCULATION SYSTEM

    … Standard CVI systems have a total carbon deposition efficiency of 5-30% using a reaction zone filled with carbon fiber preforms. Total processing time varies from 50 to 2000 hours depending on the type of system and its temperature, pressure and residence time. Unused hydrocarbon reaction …

    siu-theses Repository record for DESIGN OF AN EFFICIENT AND RAPID CHEMICAL VAPOR INFILTRATION (CVI) RE-CIRCULATION SYSTEM (opens in a new tab)

Page 1 of 5